Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Young Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Young Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Young Cemetery (FG ID #2181559). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Young Cemetery. We've listed the following communities based on their distance, with the closest first.
- Young
(Less than 2 miles to the west)
- Christopher Creek
(15 miles [24.1 km] to the north)
- Bear Flat
(15 miles [24.1 km] to the northwest)
- Grasshopper
(17 miles [27.4 km] to the east)
- Kohls Ranch
(17 miles [27.4 km] to the northwest)
- Forest Lakes
(17 miles [27.4 km] to the northeast)
- Tonto Village
(18 miles [29 km] to the northwest)
- Gisela
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Gisela have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gisela
- Gisela is located in Gila County
- Star Valley
(21 miles [33.8 km] to the northwest)
- Sun Valley
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Sun Valley have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sun Valley
- Sun Valley is located in Gila County
- Jakes Corner
(22 miles [35.4 km] to the west)
- Mesa Del Caballo
(23 miles [37 km] to the northwest)
- Payson
(23 miles [37 km] to the northwest)
- Oxbow Estates
(23 miles [37 km] to the west)
- Rye
(23 miles [37 km] to the west)
- Deer Creek
(23 miles [37 km] to the west)
- Freedom Acres
(25 miles [40.2 km] to the northwest)
- Cibecue
(26 miles [41.8 km] to the east)
- Tonto Basin
(27 miles [43.5 km] to the southwest)
- Whispering Pines
(27 miles [43.5 km] to the northwest)
- Flowing Springs
(27 miles [43.5 km] to the northwest)
- Wiggins Crossing
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Wiggins Crossing have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wiggins Crossing
- Wiggins Crossing is located in Coconino County
- Overgaard
(29 miles [46.7 km] to the northeast)
- Heber
(29 miles [46.7 km] to the northeast)
Off-the-Road Links ...
The official website for Gila County: www.co.gila.az.us/
The official website for State of Arizona: https://az.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Young Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.1023, Longitude: -110.9394 |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |