RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Arkansas >> Sevier County >> Milford >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Arkansas


The Commemorative Quarter for Arkansas







Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Milford (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Milford. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Milford is located in Sevier County.

To see how the shape of Arkansas' counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Sevier County: Hempstead, Howard, Little River, Polk & McCurtain (OK).

Below are the counties that are near Milford. For each of these counties, we show a sample of those communities that are closest to Milford:

  • Sevier County     (The home county of Milford)
    • The following are listed by their distance from Milford, with the one closest to Milford listed first.
    • Lockesburg
      (6 miles [9.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Lockesburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lockesburg
      • Lockesburg is located in Sevier County
      • Population from the 2020 Census: 710 people
    • Ben Lomond
      (6 miles [9.7 km] to the south)
      • Note: The GPS coordinates that we are using for Ben Lomond have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ben Lomond
      • Ben Lomond is located in Sevier County
      • Population from the 2020 Census: 140 people
      • Jump to TripAdvisor's Tourism page for Ben Lomond <2>
    • Paraloma
      (9 miles [14.5 km] to the southeast)
      • Jump to our Gazetteer entry for Paraloma
      • Paraloma is located in Sevier County
    • Norwoodville
      (13 miles [20.9 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Norwoodville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Norwoodville
      • Norwoodville is located in Sevier County
    • Horatio
      (15 miles [24.1 km] to the west)
      • Note: The GPS coordinates that we are using for Horatio have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Horatio
      • Horatio is located in Sevier County
      • Population from the 2020 Census: 1,011 people
      • Jump to TripAdvisor's Tourism page for Horatio <2>
    • De Queen
      (17 miles [27.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for De Queen have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for De Queen
      • De Queen is located in Sevier County
      • Population from the 2020 Census: 6,406 people
      • Jump to TripAdvisor's Tourism page for De Queen <2>
    • Process City
      (17 miles [27.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Process City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Process City
      • Process City is located in Sevier County
    • Gillham
      (21 miles [33.8 km] to the northwest)
      • Jump to our Gazetteer entry for Gillham
      • Gillham is located in Sevier County
      • Population from the 2020 Census: 155 people
  • Calhoun County
    • Unco
      (24 miles [38.6 km] to the north)
      • Jump to our Gazetteer entry for Unco
      • Unco is located in Calhoun County
  • Hempstead County
    • The following are listed by their distance from Milford, with the one closest to Milford listed first.
    • Clow
      (18 miles [29 km] to the east)
      • Jump to our Gazetteer entry for Clow
      • Clow is located in Hempstead County
    • Columbus
      (18 miles [29 km] to the southeast)
      • Note: The GPS coordinates that we are using for Columbus have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Columbus
      • Columbus is located in Hempstead County
      • Jump to TripAdvisor's Tourism page for Columbus <2>
    • Doyle
      (19 miles [30.6 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Doyle. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Doyle
      • Doyle is located in Hempstead County
    • Tokio
      (20 miles [32.2 km] to the east)
      • Jump to our Gazetteer entry for Tokio
      • Tokio is located in Hempstead County
    • Ozan
      (21 miles [33.8 km] to the east)
      • Note: The GPS coordinates that we are using for Ozan have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ozan
      • Ozan is located in Hempstead County
      • Population from the 2020 Census: 79 people
    • McNab
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for McNab have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McNab
      • McNab is located in Hempstead County
      • Population from the 2020 Census: 63 people
    • McCaskill
      (25 miles [40.2 km] to the east)
      • Note: The GPS coordinates that we are using for McCaskill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McCaskill
      • McCaskill is located in Hempstead County
      • Population from the 2020 Census: 95 people
    • Washington
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Washington have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Washington
      • Washington is located in Hempstead County
      • Population from the 2020 Census: 165 people
      • Jump to TripAdvisor's Tourism page for Washington <2>
    • Fulton
      (26 miles [41.8 km] to the southeast)
      • Jump to our Gazetteer entry for Fulton
      • Fulton is located in Hempstead County
      • Population from the 2020 Census: 191 people
    • Blevins
      (29 miles [46.7 km] to the east)
      • Note: The GPS coordinates that we are using for Blevins have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blevins
      • Blevins is located in Hempstead County
      • Population from the 2020 Census: 299 people
    • Oakhaven
      (29 miles [46.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Oakhaven have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oakhaven
      • Oakhaven is located in Hempstead County
      • Population from the 2020 Census: 58 people
    • Sheppard
      (29 miles [46.7 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Sheppard. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Sheppard
      • Sheppard is located in Hempstead County
  • Howard County
    • The following are listed by their distance from Milford, with the one closest to Milford listed first.
    • Blue Bayou
      (8 miles [12.9 km] to the northeast)
      • Jump to our Gazetteer entry for Blue Bayou
      • Blue Bayou is located in Howard County
    • Mineral Springs
      (9 miles [14.5 km] to the east)
      • Note: The GPS coordinates that we are using for Mineral Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mineral Springs
      • Mineral Springs is located in Howard County
      • Population from the 2020 Census: 1,139 people
      • Jump to TripAdvisor's Tourism page for Mineral Springs <2>
    • Center Point
      (10 miles [16.1 km] to the northeast)
      • Jump to our Gazetteer entry for Center Point
      • Center Point is located in Howard County
    • Tollette
      (12 miles [19.3 km] to the southeast)
      • Jump to our Gazetteer entry for Tollette
      • Tollette is located in Howard County
      • Population from the 2020 Census: 247 people
    • Nashville
      (13 miles [20.9 km] to the east)
    • Buck Range
      (14 miles [22.5 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Buck Range. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Buck Range
      • Buck Range is located in Howard County
    • Dierks
      (14 miles [22.5 km] to the north)
    • Saratoga
      (15 miles [24.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Saratoga have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saratoga
      • Saratoga is located in Howard County
      • Jump to TripAdvisor's Tourism page for Saratoga <2>
    • Corinth
      (16 miles [25.7 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Corinth. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Corinth
      • Corinth is located in Howard County
    • Euclid
      (18 miles [29 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Euclid. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Euclid
      • Euclid is located in Howard County
    • Galena
      (23 miles [37 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Galena. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Galena
      • Galena is located in Howard County
    • Umpire
      (24 miles [38.6 km] to the north)
      • Note: The GPS coordinates that we are using for Umpire have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Umpire
      • Umpire is located in Howard County
  • Little River County
    • The following are listed by their distance from Milford, with the one closest to Milford listed first.
    • Wilton
      (12 miles [19.3 km] to the south)
      • Jump to our Gazetteer entry for Wilton
      • Wilton is located in Little River County
      • Population from the 2020 Census: 343 people
      • Jump to TripAdvisor's Tourism page for Wilton <2>
    • Yarborough Landing
      (14 miles [22.5 km] to the south)
      • Jump to our Gazetteer entry for Yarborough Landing
      • Yarborough Landing is located in Little River County
    • Alleene
      (14 miles [22.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Alleene have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Alleene
      • Alleene is located in Little River County
    • Winthrop
      (16 miles [25.7 km] to the west)
    • Ashdown
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Ashdown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ashdown
      • Ashdown is located in Little River County
      • Population from the 2020 Census: 4,359 people
      • Jump to TripAdvisor's Tourism page for Ashdown <2>
    • Millwood
      (17 miles [27.4 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Millwood. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Millwood
      • Millwood is located in Little River County
    • Foreman
      (22 miles [35.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Foreman have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Foreman
      • Foreman is located in Little River County
      • Population from the 2020 Census: 922 people
      • Jump to TripAdvisor's Tourism page for Foreman <2>
    • Cerrogordo
      (22 miles [35.4 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Cerrogordo. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Cerrogordo
      • Cerrogordo is located in Little River County
    • Ogden
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for Ogden have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ogden
      • Ogden is located in Little River County
      • Population from the 2020 Census: 154 people
  • Pike County
    • The following are listed by their distance from Milford, with the one closest to Milford listed first.
    • Highland
      (19 miles [30.6 km] to the northeast)
      • Jump to our Gazetteer entry for Highland
      • Highland is located in Pike County
    • Nathan
      (20 miles [32.2 km] to the northeast)
      • Jump to our Gazetteer entry for Nathan
      • Nathan is located in Pike County
    • Grandfield
      (22 miles [35.4 km] to the northeast)
      • Jump to our Gazetteer entry for Grandfield
      • Grandfield is located in Pike County
    • Roy
      (23 miles [37 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Roy. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Roy
      • Roy is located in Pike County
    • Kimberley
      (24 miles [38.6 km] to the east)
      • Jump to our Gazetteer entry for Kimberley
      • Kimberley is located in Pike County
    • Murfreesboro
      (24 miles [38.6 km] to the northeast)
    • Newhope
      (24 miles [38.6 km] to the northeast)
      • Jump to our Gazetteer entry for Newhope
      • Newhope is located in Pike County
    • Mount Moriah
      (26 miles [41.8 km] to the northeast)
      • Jump to our Gazetteer entry for Mount Moriah
      • Mount Moriah is located in Pike County
    • Star of the West ‑ Historic
      (26 miles [41.8 km] to the northeast)
      • Jump to our Gazetteer entry for Star of the West
      • Star of the West is located in Pike County
    • Billstown
      (29 miles [46.7 km] to the east)
      • Jump to our Gazetteer entry for Billstown
      • Billstown is located in Pike County
    • Daisy
      (29 miles [46.7 km] to the northeast)
      • Jump to our Gazetteer entry for Daisy
      • Daisy is located in Pike County
      • Population from the 2020 Census: 109 people
    • Langley
      (30 miles [48.3 km] to the northeast)
  • Polk County
    • The following are listed by their distance from Milford, with the one closest to Milford listed first.
    • Grannis
      (25 miles [40.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for Grannis have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Grannis
      • Grannis is located in Polk County
      • Population from the 2020 Census: 566 people
    • Wickes
      (29 miles [46.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Wickes have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wickes
      • Wickes is located in Polk County
      • Population from the 2020 Census: 741 people
      • Jump to TripAdvisor's Tourism page for Wickes <2>
  • McCurtain County (OK)
  • Bowie County (TX)
    • The following are listed by their distance from Milford, with the one closest to Milford listed first.
    • Redbank
      (28 miles [45.1 km] to the south)
      • Jump to our Gazetteer entry for Redbank
      • Redbank is located in Bowie County (TX)
    • Red Lick
      (30 miles [48.3 km] to the south)
      • Note: The GPS coordinates that we are using for Red Lick have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Red Lick
      • Red Lick is located in Bowie County (TX)
      • Population from the 2020 Census: 1,025 people

For an expanded list of the communities that are closest to Milford, see our County-by-County Page for Milford.

Cemeteries Near Milford ...

Below are cemeteries that are in the vicinity of Milford.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Milford covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Milford, with the one closest to Milford listed first.

  • Kingree Chapel Cemetery
    (2 miles [3.2 km] to the north)
    • Jump to our Gazetteer entry for the Kingree Chapel Cemetery
    • Note: The GPS coordinates that we are using for the Kingree Chapel Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Wrights Chapel Cemetery
    (3 miles [4.8 km] to the south)
    • Jump to our Gazetteer entry for the Wrights Chapel Cemetery
    • Note: The GPS coordinates that we are using for the Wrights Chapel Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Hickory Grove Cemetery
    (4 miles [6.4 km] to the east)
    • Jump to our Gazetteer entry for the Hickory Grove Cemetery
    • Note: The GPS coordinates that we are using for the Hickory Grove Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Sand Field Cemetery
    (4 miles [6.4 km] to the northwest)
    • Jump to our Gazetteer entry for the Sand Field Cemetery
    • Note: The GPS coordinates that we are using for the Sand Field Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Falls Chapel Cemetery
    (5 miles [8 km] to the southwest)
    • Jump to our Gazetteer entry for the Falls Chapel Cemetery
    • Note: The GPS coordinates that we are using for the Falls Chapel Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Bluff Springs Cemetery
    (5 miles [8 km] to the east)
    • Jump to our Gazetteer entry for the Bluff Springs Cemetery
    • Note: The GPS coordinates that we are using for the Bluff Springs Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Graves Cemetery
    (5 miles [8 km] to the northeast)
    • Jump to our Gazetteer entry for the Graves Cemetery
    • Note: The GPS coordinates that we are using for the Graves Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Old Union Cemetery
    (5 miles [8 km] to the northwest)
    • Jump to our Gazetteer entry for the Old Union Cemetery
    • Note: The GPS coordinates that we are using for the Old Union Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Bellville Cemetery
    (5 miles [8 km] to the west)
    • Jump to our Gazetteer entry for the Bellville Cemetery
    • Note: The GPS coordinates that we are using for the Bellville Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Hopson Cemetery
    (6 miles [9.7 km] to the southwest)
    • Jump to our Gazetteer entry for the Hopson Cemetery
    • Note: The GPS coordinates that we are using for the Hopson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Ben Lomond Cemetery
    (6 miles [9.7 km] to the south)
    • Jump to our Gazetteer entry for the Ben Lomond Cemetery
    • Note: The GPS coordinates that we are using for the Ben Lomond Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Coulter Cemetery
    (6 miles [9.7 km] to the northeast)
    • Jump to our Gazetteer entry for the Coulter Cemetery
    • Note: The GPS coordinates that we are using for the Coulter Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Continue List   (184 more) ...
    • Mt. Carmen Cemetery
      (6 miles [9.7 km] to the northeast)
      • Jump to our Gazetteer entry for the Mt. Carmen Cemetery
      • Note: The GPS coordinates that we are using for the Mt. Carmen Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Lockesburg Cemetery
      (6 miles [9.7 km] to the northwest)
      • Jump to our Gazetteer entry for the Lockesburg Cemetery
      • Note: The GPS coordinates that we are using for the Lockesburg Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Brownstown Cemetery
      (7 miles [11.3 km] to the south)
      • Jump to our Gazetteer entry for the Brownstown Cemetery
      • Note: The GPS coordinates that we are using for the Brownstown Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

While we didn't find Milford in the Atlas, the following 1895 communities would have been found near the current location of Milford.

These communities are listed based on their distance from Milford, with the one closest to Milford listed first.

  • Ben Lomond
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Ben Lomond have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ben Lomond
    • Ben Lomond is located in Sevier County
    • Population from the 2020 Census: 140 people
    • Jump to TripAdvisor's Tourism page for Ben Lomond <2>
  • Lockesburg
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Lockesburg have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lockesburg
    • Lockesburg is located in Sevier County
    • Population from the 2020 Census: 710 people
  • Brownstown
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Brownstown have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brownstown
    • Brownstown is located in Sevier County
  • Center Point
    (10 miles [16.1 km] to the northeast)
    • Jump to our Gazetteer entry for Center Point
    • Center Point is located in Howard County
  • Tollette
    (12 miles [19.3 km] to the southeast)
    • Jump to our Gazetteer entry for Tollette
    • Tollette is located in Howard County
    • Population from the 2020 Census: 247 people
  • Lebanon
    (12 miles [19.3 km] to the north)
    • Note: The GPS coordinates that we are using for Lebanon have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lebanon
    • Lebanon is located in Sevier County
  • Allbrook
    (13 miles [20.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Allbrook have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Allbrook
    • Allbrook is located in Howard County
  • Nashville
    (13 miles [20.9 km] to the east)
  • Norwoodville
    (13 miles [20.9 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for Norwoodville. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Norwoodville
    • Norwoodville is located in Sevier County
  • Rankin ‑ Historic
    (14 miles [22.5 km] to the south)
    • Note: The GPS coordinates that we are using for Rankin have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rankin
    • Rankin is located in Little River County
  • Buck Range
    (14 miles [22.5 km] to the east)
    • Note: We haven't been able to verify our GPS coordinates for Buck Range. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Buck Range
    • Buck Range is located in Howard County
  • Peytonville
    (15 miles [24.1 km] to the south)
    • Note: The GPS coordinates that we are using for Peytonville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Peytonville
    • Peytonville is located in Little River County
  • Continue List   (14 more) ...
    • Saratoga
      (15 miles [24.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Saratoga have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saratoga
      • Saratoga is located in Howard County
      • Jump to TripAdvisor's Tourism page for Saratoga <2>
    • Compton ‑ Historic
      (16 miles [25.7 km] to the east)
      • Note: The GPS coordinates that we are using for Compton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Compton
      • Compton is located in Hempstead County
    • Corinth
      (16 miles [25.7 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Corinth. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Corinth
      • Corinth is located in Howard County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Milford. See our List of 1890's Communities around Milford.

Newspapers Published in Milford ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 29 newspapers that have been published in the area around Milford.

Although we're unaware of any newspapers that were published in the immediate area of Milford, there are papers which were published within 23 miles [37 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Milford.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Milford:

Unfortunately, we don't know of a website for Milford. If you can help, please contact us through our Feedback Page.

The official website for Sevier County: www.seviercounty-ar.com/

The official website for State of Arkansas: https://portal.arkansas.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Milford, please let us know so that we can improve our accuracy.
<5>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Milford) to Point B.Our distance measurements begin at a specific point in Milford. The point we use is located at these GPS coordinates - Latitude: 33.9187, Longitude: -94.0855       In this case, the coordinates for Milford have been provided by the Geographic Names Information System (GNIS).









 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 28 Apr 2025