Census Data for Turnbough Town
As far as we can tell, Turnbough Town has not been included in past Census counts, so there is no population information for this community.
While we don't have census information for Turnbough Town, you might be interested in some nearby communities where we do:
- Margaret
(Less than 2 miles to the east)- Note: The GPS coordinates that we are using for Margaret have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Margaret
- Margaret is located in Saint Clair County
- Jump to TripAdvisor's Tourism page for Margaret <2>
- Argo
(2 miles [3.2 km] to the northwest) - Branchville
(4 miles [6.4 km] to the northeast)- Note: The GPS coordinates that we are using for Branchville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Branchville
- Branchville is located in Saint Clair County
- Odenville
(4 miles [6.4 km] to the east)- Jump to our Gazetteer entry for Odenville
- Odenville is located in Saint Clair County
- Jump to TripAdvisor's Tourism page for Odenville <2>
- Moody
(5 miles [8 km] to the south)- Jump to our Gazetteer entry for Moody
- Moody is located in Saint Clair County
- Jump to TripAdvisor's Tourism page for Moody <2>
- Springville
(6 miles [9.7 km] to the north)- Jump to our Gazetteer entry for Springville
- Springville is located in Saint Clair County
- Jump to TripAdvisor's Tourism page for Springville <2>
- Clay
(7 miles [11.3 km] to the west)- Jump to our Gazetteer entry for Clay
- Clay is located in Jefferson County
- The population in 2015 was estimated at 9,655 people. This represents a 0.55% decrease since 2010.The 2010 Census gave a population of 9,708 people.
- Jump to TripAdvisor's Tourism page for Clay <2>
- Trussville
(8 miles [12.9 km] to the southwest)- Jump to our Gazetteer entry for Trussville
- Trussville is located in Jefferson County
- Jump to TripAdvisor's Tourism page for Trussville <2>
- Leeds
(9 miles [14.5 km] to the southwest)- Jump to our Gazetteer entry for Leeds
- Leeds is located in Jefferson County
- Jump to TripAdvisor's Tourism page for Leeds <2>
- Center Point
(12 miles [19.3 km] to the west)- Jump to our Gazetteer entry for Center Point
- Center Point is located in Jefferson County
- The population in 2015 was estimated at 16,655 people. This represents a 1.57% decrease since 2010.The 2010 Census gave a population of 16,921 people.
- Jump to TripAdvisor's Tourism page for Center Point <2>
- Pell City
(12 miles [19.3 km] to the southeast)- Jump to our Gazetteer entry for Pell City
- Pell City is located in Saint Clair County
- Jump to TripAdvisor's Tourism page for Pell City <2>
- Pinson
(12 miles [19.3 km] to the west)- Jump to our Gazetteer entry for Pinson
- Pinson is located in Jefferson County
- The population in 2015 was estimated at 7,438 people. This represents a 3.84% increase since 2010.The 2010 Census gave a population of 7,163 people.
- Jump to TripAdvisor's Tourism page for Pinson <2>
- Continue List (928 more) ...
- Highland Lake
(14 miles [22.5 km] to the north)- Note: The GPS coordinates that we are using for Highland Lake have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Highland Lake
- Highland Lake is located in Blount County
- Ashville
(15 miles [24.1 km] to the northeast)- Note: The GPS coordinates that we are using for Ashville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ashville
- Ashville is located in Saint Clair County
- Jump to TripAdvisor's Tourism page for Ashville <2>
- Irondale
(15 miles [24.1 km] to the southwest)- Note: The GPS coordinates that we are using for Irondale have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Irondale
- Irondale is located in Jefferson County
- Jump to TripAdvisor's Tourism page for Irondale <2>
- Highland Lake
Saint Clair County ...
Turnbough Town is located in Saint Clair County<3>.
For more information, please visit our Census Page for Saint Clair County.
Miscellaneous Information for Turnbough Town ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Saint Clair County or the community of Turnbough Town:
- The GNIS Codes ...
- The FIPS Codes ...
- An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
- State Code: 01 (Alabama)
- County Code: 115 (Saint Clair County)
- Place Code: 77195 (Turnbough Town)
- State & County Code: 01/115 (Alabama / Saint Clair County)
- State & Place Code: 01/77195 (Alabama / Turnbough Town)
- Misc. Census Codes ...
- Turnbough Town is located in Census Region #3 (the South Region) and Division #6 (the East South-Central Division).
For more information about the various Federal identification codes, please visit our Misc Page for Turnbough Town.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Turnbough Town. If you can help, please contact us through our Feedback Page.
The official website for Saint Clair County: www.stclairco.com/
The official website for State of Alabama: https://www.alabama.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Footnotes ...
| <1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | If you're interested in how the shape of Alabama's counties, including Saint Clair, have changed over time, we recommend the Atlas of Historical County Boundaries. |