Welcome to Mill Creek Community ...
Mill Creek Community is located in Portage County<1>.
A typical abbreviation for Mill Creek Community: Mill Crk. Community (or less commonly used: Mill Ck. Community or Mill Cr. Community)
Mill Creek Community is 1,110 feet [338 m] above sea level.<2>.
Time Zone: Mill Creek Community lies in the Central Time Zone (CST/CDT) and observes daylight saving time
Area Codes for Mill Creek Community: 715 & 534<3>
Communities near Mill Creek Community ...
We have created a list of 10 communities that are near Mill Creek Community.
- Stevens Point
(5 miles [8 km] to the east)- Jump to our Gazetteer entry for Stevens Point
- Stevens Point is located in Portage County
- Population from the 2020 Census: 25,949 people
- Wisconsin Rapids
(12 miles [19.3 km] to the southwest)- Jump to our Gazetteer entry for Wisconsin Rapids
- Wisconsin Rapids is located in Wood County
- Population from the 2020 Census: 17,555 people
- Plover
(8 miles [12.9 km] to the southeast) - Mosinee
(17 miles [27.4 km] to the north) - Nekoosa
(19 miles [30.6 km] to the southwest)- Jump to our Gazetteer entry for Nekoosa
- Nekoosa is located in Wood County
- Population from the 2020 Census: 2,391 people
- Port Edwards
(15 miles [24.1 km] to the southwest)- Jump to our Gazetteer entry for Port Edwards
- Port Edwards is located in Wood County
- Population from the 2020 Census: 1,752 people
- Whiting
(6 miles [9.7 km] to the southeast) - Biron
(8 miles [12.9 km] to the southwest) - Auburndale
(17 miles [27.4 km] to the west)- Note: The GPS coordinates that we are using for Auburndale have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Auburndale
- Auburndale is located in Wood County
- Population from the 2020 Census: 658 people
- Vesper
(14 miles [22.5 km] to the west)- Jump to our Gazetteer entry for Vesper
- Vesper is located in Wood County
- Population from the 2020 Census: 539 people
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Mill Creek Community. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Mill Creek Community.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Mill Creek Community. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Mill Creek Community.
We also have a detailed list of newspapers that have been published in the area around Mill Creek Community. See our Newspapers Page for Mill Creek Community.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Mill Creek Community. If you can help, please contact us through our Feedback Page.
The official website for Portage County: www.co.portage.wi.us/
The official website for State of Wisconsin: https://www.wisconsin.gov/
Footnotes ...
| <1> | If you're interested in how the shape of Wisconsin's counties, including Portage, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <2> | The elevation is an estimate for the area around Mill Creek Community - it will be higher in some places and lower in others. |
| <3> | When there's a risk of an area code running out of phone numbers, an 'Overlay Area Code' is created that has the same geographic boundaries as the existing area code. In this case, the 715 code has been Overlayed with the 534 area code. New phone numbers in the Mill Creek Community area will be assigned with one of these codes: 715 or 534. As a result, placing a call in the Mill Creek Community area will require 10-digit dialing (where you enter both the area code and then the phone number). |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |