RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Wisconsin >> Vernon County >> Liberty Pole >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Wisconsin


The Commemorative Quarter for Wisconsin







Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Liberty Pole (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Liberty Pole. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most hospitals and doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Liberty Pole is located in Vernon County.

To see how the shape of Wisconsin's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Vernon County: Allamakee (IA), Houston (MN), Crawford, Juneau, La Crosse, Monroe, Richland & Sauk.

Below are the counties that are near Liberty Pole. For each of these counties, we show a sample of those communities that are closest to Liberty Pole:

  • Vernon County     (The home county of Liberty Pole)
    • The following are listed by their distance from Liberty Pole, with the one closest to Liberty Pole listed first.
    • Fargo
      (3 miles [4.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Fargo have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fargo
      • Fargo is located in Vernon County
    • Viroqua
      (4 miles [6.4 km] to the north)
      • Note: The GPS coordinates that we are using for Viroqua have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Viroqua
      • Viroqua is located in Vernon County
      • Population from the 2020 Census: 4,394 people
    • Readstown
      (7 miles [11.3 km] to the east)
      • Note: The GPS coordinates that we are using for Readstown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Readstown
      • Readstown is located in Vernon County
      • Population from the 2020 Census: 414 people
    • Purdy
      (7 miles [11.3 km] to the west)
      • Note: The GPS coordinates that we are using for Purdy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Purdy
      • Purdy is located in Vernon County
    • Liberty
      (8 miles [12.9 km] to the east)
      • Note: The GPS coordinates that we are using for Liberty have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Liberty
      • Liberty is located in Vernon County
    • Retreat
      (9 miles [14.5 km] to the west)
      • Jump to our Gazetteer entry for Retreat
      • Retreat is located in Vernon County
    • Westby
      (11 miles [17.7 km] to the north)
      • Jump to our Gazetteer entry for Westby
      • Westby is located in Vernon County
      • Population from the 2020 Census: 2,254 people
    • La Farge
      (14 miles [22.5 km] to the northeast)
      • Jump to our Gazetteer entry for La Farge
      • La Farge is located in Vernon County
      • Population from the 2020 Census: 763 people
    • Chaseburg
      (14 miles [22.5 km] to the northwest)
      • Jump to our Gazetteer entry for Chaseburg
      • Chaseburg is located in Vernon County
      • Population from the 2020 Census: 291 people
    • Coon Valley
      (15 miles [24.1 km] to the north)
      • Note: The GPS coordinates that we are using for Coon Valley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Coon Valley
      • Coon Valley is located in Vernon County
      • Population from the 2020 Census: 782 people
    • Newry
      (15 miles [24.1 km] to the north)
      • Jump to our Gazetteer entry for Newry
      • Newry is located in Vernon County
    • Genoa
      (16 miles [25.7 km] to the west)
      • Jump to our Gazetteer entry for Genoa
      • Genoa is located in Vernon County
      • Population from the 2020 Census: 260 people
    • Stoddard
      (19 miles [30.6 km] to the northwest)
      • Jump to our Gazetteer entry for Stoddard
      • Stoddard is located in Vernon County
      • Population from the 2020 Census: 831 people
  • Crawford County
    • The following are listed by their distance from Liberty Pole, with the one closest to Liberty Pole listed first.
    • Towerville
      (5 miles [8 km] to the south)
      • Note: The GPS coordinates that we are using for Towerville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Towerville
      • Towerville is located in Crawford County
    • Soldiers Grove
      (9 miles [14.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Soldiers Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Soldiers Grove
      • Soldiers Grove is located in Crawford County
      • Population from the 2020 Census: 535 people
    • Gays Mills
      (12 miles [19.3 km] to the south)
      • Note: The GPS coordinates that we are using for Gays Mills have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gays Mills
      • Gays Mills is located in Crawford County
      • Population from the 2020 Census: 504 people
    • Mount Sterling
      (12 miles [19.3 km] to the south)
      • Note: The GPS coordinates that we are using for Mount Sterling have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Sterling
      • Mount Sterling is located in Crawford County
      • Population from the 2020 Census: 196 people
    • Ferryville
      (13 miles [20.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for Ferryville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ferryville
      • Ferryville is located in Crawford County
      • Population from the 2020 Census: 173 people
    • Bell Center
      (14 miles [22.5 km] to the south)
      • Note: The GPS coordinates that we are using for Bell Center have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bell Center
      • Bell Center is located in Crawford County
      • Population from the 2020 Census: 114 people
    • Petersburg
      (15 miles [24.1 km] to the south)
      • Jump to our Gazetteer entry for Petersburg
      • Petersburg is located in Crawford County
    • De Soto
      (15 miles [24.1 km] to the west)
      • Jump to our Gazetteer entry for De Soto
      • De Soto is located in Crawford County
      • Population from the 2020 Census: 278 people
    • Steuben
      (21 miles [33.8 km] to the south)
      • Jump to our Gazetteer entry for Steuben
      • Steuben is located in Crawford County
      • Population from the 2020 Census: 121 people
    • Eastman
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for Eastman have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Eastman
      • Eastman is located in Crawford County
      • Population from the 2020 Census: 404 people
    • Boydtown
      (26 miles [41.8 km] to the south)
      • Jump to our Gazetteer entry for Boydtown
      • Boydtown is located in Crawford County
    • Wauzeka
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Wauzeka have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wauzeka
      • Wauzeka is located in Crawford County
      • Population from the 2020 Census: 733 people
  • Grant County
    • The following are listed by their distance from Liberty Pole, with the one closest to Liberty Pole listed first.
    • Blue River
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Blue River have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blue River
      • Blue River is located in Grant County
      • Population from the 2020 Census: 418 people
    • Boscobel
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Boscobel have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Boscobel
      • Boscobel is located in Grant County
      • Population from the 2020 Census: 3,134 people
    • Woodman
      (28 miles [45.1 km] to the south)
      • Note: The GPS coordinates that we are using for Woodman have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Woodman
      • Woodman is located in Grant County
      • Population from the 2020 Census: 129 people
  • La Crosse County
    • The following are listed by their distance from Liberty Pole, with the one closest to Liberty Pole listed first.
    • Middle Ridge
      (21 miles [33.8 km] to the north)
      • Note: The GPS coordinates that we are using for Middle Ridge have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Middle Ridge
      • Middle Ridge is located in La Crosse County
    • Saint Joseph
      (21 miles [33.8 km] to the north)
      • Jump to our Gazetteer entry for Saint Joseph
      • Saint Joseph is located in La Crosse County
    • Shelby
      (23 miles [37 km] to the northwest)
      • Note: The GPS coordinates that we are using for Shelby have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shelby
      • Shelby is located in La Crosse County
    • Barre Mills
      (26 miles [41.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Barre Mills have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Barre Mills
      • Barre Mills is located in La Crosse County
    • Bangor
      (28 miles [45.1 km] to the north)
      • Note: The GPS coordinates that we are using for Bangor have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bangor
      • Bangor is located in La Crosse County
      • Population from the 2020 Census: 1,442 people
    • Rockland
      (28 miles [45.1 km] to the north)
      • Jump to our Gazetteer entry for Rockland
      • Rockland is located in La Crosse County
      • Population from the 2020 Census: 710 people
    • La Crosse
      (28 miles [45.1 km] to the northwest)
      • Jump to our Gazetteer entry for La Crosse
      • La Crosse is located in La Crosse County
      • Population from the 2020 Census: 51,163 people
    • West Salem
      (29 miles [46.7 km] to the north)
      • Jump to our Gazetteer entry for West Salem
      • West Salem is located in La Crosse County
      • Population from the 2020 Census: 5,013 people
    • Grand Crossing
      (29 miles [46.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Grand Crossing have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Grand Crossing
      • Grand Crossing is located in La Crosse County
    • French Island
      (30 miles [48.3 km] to the northwest)
      • Jump to our Gazetteer entry for French Island
      • French Island is located in La Crosse County
  • Monroe County
    • The following are listed by their distance from Liberty Pole, with the one closest to Liberty Pole listed first.
    • Cashton
      (18 miles [29 km] to the north)
      • Note: The GPS coordinates that we are using for Cashton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cashton
      • Cashton is located in Monroe County
      • Population from the 2020 Census: 1,111 people
    • Melvina
      (22 miles [35.4 km] to the north)
      • Jump to our Gazetteer entry for Melvina
      • Melvina is located in Monroe County
      • Population from the 2020 Census: 109 people
    • Oil City
      (24 miles [38.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Oil City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oil City
      • Oil City is located in Monroe County
    • Norwalk
      (27 miles [43.5 km] to the northeast)
      • Jump to our Gazetteer entry for Norwalk
      • Norwalk is located in Monroe County
      • Population from the 2020 Census: 633 people
    • Wilton
      (29 miles [46.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Wilton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wilton
      • Wilton is located in Monroe County
      • Population from the 2020 Census: 498 people
  • Richland County
    • The following are listed by their distance from Liberty Pole, with the one closest to Liberty Pole listed first.
    • Viola
      (12 miles [19.3 km] to the east)
      • Note: The GPS coordinates that we are using for Viola have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Viola
      • Viola is located in Richland County
      • Population from the 2020 Census: 665 people
    • Sabin
      (17 miles [27.4 km] to the east)
      • Note: The GPS coordinates that we are using for Sabin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sabin
      • Sabin is located in Richland County
    • Bloom City
      (22 miles [35.4 km] to the east)
      • Jump to our Gazetteer entry for Bloom City
      • Bloom City is located in Richland County
    • Boaz
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Boaz have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Boaz
      • Boaz is located in Richland County
      • Population from the 2020 Census: 148 people
    • Gillingham
      (23 miles [37 km] to the east)
      • Jump to our Gazetteer entry for Gillingham
      • Gillingham is located in Richland County
    • Westport
      (23 miles [37 km] to the southeast)
      • Note: The GPS coordinates that we are using for Westport have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Westport
      • Westport is located in Richland County
    • Yuba
      (24 miles [38.6 km] to the east)
      • Note: The GPS coordinates that we are using for Yuba have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Yuba
      • Yuba is located in Richland County
      • Population from the 2020 Census: 69 people
    • Hub City
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Hub City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hub City
      • Hub City is located in Richland County
    • Richland Center
      (28 miles [45.1 km] to the east)
      • Jump to our Gazetteer entry for Richland Center
      • Richland Center is located in Richland County
      • Population from the 2020 Census: 4,949 people
    • Balmoral
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Balmoral have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Balmoral
      • Balmoral is located in Richland County
  • Allamakee County (IA)
    • The following are listed by their distance from Liberty Pole, with the one closest to Liberty Pole listed first.
    • Lansing
      (18 miles [29 km] to the southwest)
      • Note: The GPS coordinates that we are using for Lansing have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lansing
      • Lansing is located in Allamakee County (IA)
      • Population from the 2020 Census: 933 people
      • Jump to TripAdvisor's Tourism page for Lansing <2>
    • New Albin
      (18 miles [29 km] to the west)
    • Harpers Ferry
      (23 miles [37 km] to the southwest)
    • Dalby
      (24 miles [38.6 km] to the southwest)
      • Jump to our Gazetteer entry for Dalby
      • Dalby is located in Allamakee County (IA)
    • Waterville
      (27 miles [43.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Waterville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Waterville
      • Waterville is located in Allamakee County (IA)
      • Population from the 2020 Census: 142 people
    • Waukon Junction
      (27 miles [43.5 km] to the southwest)
      • Jump to our Gazetteer entry for Waukon Junction
      • Waukon Junction is located in Allamakee County (IA)
    • Lycurgus
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Lycurgus have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lycurgus
      • Lycurgus is located in Allamakee County (IA)
    • Dorchester
      (30 miles [48.3 km] to the west)
  • Houston County (MN)
    • The following are listed by their distance from Liberty Pole, with the one closest to Liberty Pole listed first.
    • Reno
      (19 miles [30.6 km] to the west)
      • Jump to our Gazetteer entry for Reno
      • Reno is located in Houston County (MN)
    • Brownsville
      (23 miles [37 km] to the northwest)
      • Jump to our Gazetteer entry for Brownsville
      • Brownsville is located in Houston County (MN)
      • Population from the 2020 Census: 505 people
    • Eitzen
      (27 miles [43.5 km] to the west)
      • Jump to our Gazetteer entry for Eitzen
      • Eitzen is located in Houston County (MN)
      • Population from the 2020 Census: 248 people
    • Hokah
      (28 miles [45.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Hokah have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hokah
      • Hokah is located in Houston County (MN)
      • Population from the 2020 Census: 548 people
      • Jump to TripAdvisor's Tourism page for Hokah <2>
    • La Crescent
      (30 miles [48.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for La Crescent have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for La Crescent
      • La Crescent is located in Houston County (MN)
      • Population from the 2020 Census: 5,037 people
      • Jump to TripAdvisor's Tourism page for La Crescent <2>

For an expanded list of the communities that are closest to Liberty Pole, see our County-by-County Page for Liberty Pole.

Newspapers Published in Liberty Pole ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 125 newspapers that have been published in the area around Liberty Pole.

Although we're unaware of any newspapers that were published in the immediate area of Liberty Pole, there are papers which were published within 30 miles [48.3 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Liberty Pole.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Liberty Pole:

Cemeteries Near Liberty Pole ...

Below are cemeteries that are in the vicinity of Liberty Pole.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Liberty Pole covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Liberty Pole, with the one closest to Liberty Pole listed first.

  • Brookville Cemetery
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Brookville Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Brookville Cemetery
  • Belgium Ridge Cemetery
    (3 miles [4.8 km] to the north)
    • Note: The GPS coordinates that we are using for the Belgium Ridge Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Belgium Ridge Cemetery
  • White Cemetery
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for the White Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the White Cemetery
  • Viroqua Cemetery
    (4 miles [6.4 km] to the north)
  • Pioneer Cemetery
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for the Pioneer Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Pioneer Cemetery
  • Fargo Cemetery
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Fargo Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Fargo Cemetery
  • Fortney Cemetery
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Fortney Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Fortney Cemetery
  • Towerville Cemetery
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for the Towerville Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Towerville Cemetery
  • Hooverson Cemetery
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Hooverson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Hooverson Cemetery
  • Kickapoo Cemetery
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Kickapoo Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Kickapoo Cemetery
  • Bishop Branch Cemetery
    (6 miles [9.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Bishop Branch Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Bishop Branch Cemetery
  • County Farm Cemetery
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for the County Farm Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the County Farm Cemetery
  • Continue List   (239 more) ...
    • Carter Cemetery
      (7 miles [11.3 km] to the east)
      • Note: The GPS coordinates that we are using for the Carter Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Carter Cemetery
    • Zion Cemetery
      (7 miles [11.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for the Zion Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Zion Cemetery
    • Walnut Mound Cemetery
      (8 miles [12.9 km] to the west)
      • Note: The GPS coordinates that we are using for the Walnut Mound Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Walnut Mound Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

The Rand McNally Atlas shows that Liberty Pole had a population of 79 people in 1895 with a post office and no railroad service.

These communities are listed based on their distance from Liberty Pole, with the one closest to Liberty Pole listed first.

  • Fargo
    (3 miles [4.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Fargo have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fargo
    • Fargo is located in Vernon County
  • Folsom
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Folsom have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Folsom
    • Folsom is located in Vernon County
  • Viroqua
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for Viroqua have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Viroqua
    • Viroqua is located in Vernon County
    • Population from the 2020 Census: 4,394 people
  • West Prairie
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for West Prairie have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for West Prairie
    • West Prairie is located in Vernon County
  • Rising Sun
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Rising Sun have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rising Sun
    • Rising Sun is located in Crawford County
  • Towerville
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Towerville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Towerville
    • Towerville is located in Crawford County
  • Springville
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for Springville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Springville
    • Springville is located in Vernon County
  • Readstown
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for Readstown have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Readstown
    • Readstown is located in Vernon County
    • Population from the 2020 Census: 414 people
  • Purdy
    (7 miles [11.3 km] to the west)
    • Note: The GPS coordinates that we are using for Purdy have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Purdy
    • Purdy is located in Vernon County
  • Liberty
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for Liberty have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Liberty
    • Liberty is located in Vernon County
  • Ross
    (8 miles [12.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Ross have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ross
    • Ross is located in Vernon County
  • Retreat
    (9 miles [14.5 km] to the west)
    • Jump to our Gazetteer entry for Retreat
    • Retreat is located in Vernon County
  • Continue List   (14 more) ...
    • Soldiers Grove
      (9 miles [14.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Soldiers Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Soldiers Grove
      • Soldiers Grove is located in Crawford County
      • Population from the 2020 Census: 535 people
    • Esofea
      (10 miles [16.1 km] to the north)
      • Note: The GPS coordinates that we are using for Esofea have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Esofea
      • Esofea is located in Vernon County
    • Avalanche
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Avalanche have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Avalanche
      • Avalanche is located in Vernon County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Liberty Pole. See our List of 1890's Communities around Liberty Pole.

Unfortunately, we don't know of a website for Liberty Pole. If you can help, please contact us through our Feedback Page.

The official website for State of Wisconsin: https://www.wisconsin.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Liberty Pole) to Point B.Our distance measurements begin at a specific point in Liberty Pole. The point we use is located at these GPS coordinates - Latitude: 43.4897, Longitude: -90.9084    
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Liberty Pole, please let us know so that we can improve our accuracy.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024