Nearby Communities in the 1890s

We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

The Rand McNally Atlas shows that Wilderville had a population of 89 people in 1895 with a post office and no railroad service.

The following communities are listed based on their distance from Wilderville, with the one closest to Wilderville listed first.

Baileyville
(4 miles [6.4 km] to the southeast)
- Jump to our Gazetteer entry for Baileyville
- Baileyville is located in Milam County
Rosebud
(5 miles [8 km] to the west)
- Jump to our Gazetteer entry for Rosebud
- Rosebud is located in Falls County
- Population from the 2020 Census: 1,344 people
- Jump to TripAdvisor's Tourism page for Rosebud <2>
Clarkson
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Clarkson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarkson
- Clarkson is located in Milam County
Travis
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Travis have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Travis
- Travis is located in Falls County
Burlington
(9 miles [14.5 km] to the southwest)
- Jump to our Gazetteer entry for Burlington
- Burlington is located in Milam County
- Jump to TripAdvisor's Tourism page for Burlington <2>
Reagan
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Reagan have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reagan
- Reagan is located in Falls County
- Jump to TripAdvisor's Tourism page for Reagan <2>
Jones Prairie
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Jones Prairie have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jones Prairie
- Jones Prairie is located in Milam County
Hammond
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Hammond have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hammond
- Hammond is located in Robertson County
Ben Arnold
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Ben Arnold have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ben Arnold
- Ben Arnold is located in Milam County
Lott
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Lott have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lott
- Lott is located in Falls County
- Population from the 2020 Census: 744 people
- Jump to TripAdvisor's Tourism page for Lott <2>
Bremond
(12 miles [19.3 km] to the east)
- Jump to our Gazetteer entry for Bremond
- Bremond is located in Robertson County
- Population from the 2020 Census: 962 people
- Jump to TripAdvisor's Tourism page for Bremond <2>
Marlin
(13 miles [20.9 km] to the north)
- Jump to our Gazetteer entry for Marlin
- Marlin is located in Falls County
- Population from the 2020 Census: 5,551 people
- Jump to TripAdvisor's Tourism page for Marlin <2>
Westphalia
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Westphalia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Westphalia
- Westphalia is located in Falls County
Barclay
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Barclay have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barclay
- Barclay is located in Falls County
Maysfield
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Maysfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maysfield
- Maysfield is located in Milam County
- Jump to TripAdvisor's Tourism page for Maysfield <2>
Calvert
(15 miles [24.1 km] to the southeast)
- Jump to our Gazetteer entry for Calvert
- Calvert is located in Robertson County
- Population from the 2020 Census: 1,136 people
- Jump to TripAdvisor's Tourism page for Calvert <2>
Ocker
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Ocker have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ocker
- Ocker is located in Bell County
Cyclone
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Cyclone have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cyclone
- Cyclone is located in Bell County
Branchville
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Branchville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Branchville
- Branchville is located in Milam County
Nesbitt
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Nesbitt have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nesbitt
- Nesbitt is located in Robertson County
Chilton
(16 miles [25.7 km] to the northwest)
- Jump to our Gazetteer entry for Chilton
- Chilton is located in Falls County
- Jump to TripAdvisor's Tourism page for Chilton <2>
Durango
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Durango have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Durango
- Durango is located in Falls County
Stranger
(17 miles [27.4 km] to the northeast)
- Jump to our Gazetteer entry for Stranger
- Stranger is located in Falls County
McClanahan
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for McClanahan have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McClanahan
- McClanahan is located in Falls County
Cameron
(18 miles [29 km] to the south)
- Jump to our Gazetteer entry for Cameron
- Cameron is located in Milam County
- Population from the 2020 Census: 5,410 people
- Jump to TripAdvisor's Tourism page for Cameron <2>

Off-the-Road Links ...

The official website for State of Texas: https://texas.gov/

Footnotes ...

<1>	We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Wilderville, please let us know so that we can improve our accuracy.
<2>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.