RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> McLennan County >> West >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Texas

The Commemorative Quarter for Texas





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for West. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for West.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to West - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 43 communities listed:

  • Abbott
    (5 miles [8 km] to the north)
  • Aquilla
    (8 miles [12.9 km] to the northwest)
  • Axtell
    (12 miles [19.3 km] to the southeast)
  • Bellmead
    (13 miles [20.9 km] to the south)
    • Note: The GPS coordinates that we are using for Bellmead have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bellmead
    • Bellmead is located in McLennan County
    • Population from the 2020 Census: 10,835 people
    • Jump to TripAdvisor's Tourism page for Bellmead <2>
  • Blooming Grove
    (29 miles [46.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Blooming Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Blooming Grove
    • Blooming Grove is located in Navarro County
    • Population from the 2020 Census: 831 people
    • Jump to TripAdvisor's Tourism page for Blooming Grove <2>
  • Blum
    (29 miles [46.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Blum have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Blum
    • Blum is located in Hill County
    • Population from the 2020 Census: 476 people
    • Jump to TripAdvisor's Tourism page for Blum <2>
  • Brandon
    (18 miles [29 km] to the northeast)
    • Note: The GPS coordinates that we are using for Brandon have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brandon
    • Brandon is located in Hill County
    • Jump to TripAdvisor's Tourism page for Brandon <2>
  • Bynum
    (12 miles [19.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Bynum have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bynum
    • Bynum is located in Hill County
    • Population from the 2020 Census: 208 people
    • Jump to TripAdvisor's Tourism page for Bynum <2>
  • China Spring
    (16 miles [25.7 km] to the southwest)
  • Clifton
    (28 miles [45.1 km] to the west)
    • Note: The GPS coordinates that we are using for Clifton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clifton
    • Clifton is located in Bosque County
    • Population from the 2020 Census: 3,410 people
    • Jump to TripAdvisor's Tourism page for Clifton <2>
  • Coolidge
    (26 miles [41.8 km] to the east)
    • Note: The GPS coordinates that we are using for Coolidge have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Coolidge
    • Coolidge is located in Limestone County
    • Population from the 2020 Census: 950 people
    • Jump to TripAdvisor's Tourism page for Coolidge <2>
  • Covington
    (27 miles [43.5 km] to the north)
    • Note: The GPS coordinates that we are using for Covington have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Covington
    • Covington is located in Hill County
    • Population from the 2020 Census: 283 people
    • Jump to TripAdvisor's Tourism page for Covington <2>
  • Crawford
    (27 miles [43.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Crawford have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Crawford
    • Crawford is located in McLennan County
    • Population from the 2020 Census: 870 people
    • Jump to TripAdvisor's Tourism page for Crawford <2>
  • Dawson
    (23 miles [37 km] to the east)
    • Note: The GPS coordinates that we are using for Dawson have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dawson
    • Dawson is located in Navarro County
    • Population from the 2020 Census: 798 people
    • Jump to TripAdvisor's Tourism page for Dawson <2>
  • Elm Mott
    (9 miles [14.5 km] to the south)
  • Frost
    (25 miles [40.2 km] to the northeast)
  • Hewitt
    (24 miles [38.6 km] to the south)
    • Jump to our Gazetteer entry for Hewitt
    • Hewitt is located in McLennan County
    • Population from the 2020 Census: 15,113 people
    • Jump to TripAdvisor's Tourism page for Hewitt <2>
  • Hillsboro
    (14 miles [22.5 km] to the north)
  • Hubbard
    (17 miles [27.4 km] to the east)
    • Note: The GPS coordinates that we are using for Hubbard have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hubbard
    • Hubbard is located in Hill County
    • Population from the 2020 Census: 1,418 people
    • Jump to TripAdvisor's Tourism page for Hubbard <2>
  • Irene
    (18 miles [29 km] to the northeast)
    • Note: The GPS coordinates that we are using for Irene have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Irene
    • Irene is located in Hill County
    • Jump to TripAdvisor's Tourism page for Irene <2>
  • Italy
    (29 miles [46.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Italy have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Italy
    • Italy is located in Ellis County
    • Population from the 2020 Census: 1,964 people
    • Jump to TripAdvisor's Tourism page for Italy <2>
  • Itasca
    (24 miles [38.6 km] to the north)
  • Kopperl
    (30 miles [48.3 km] to the northwest)
  • Lacy - Lakeview
    (12 miles [19.3 km] to the south)
    • Note: The GPS coordinates that we are using for Lacy - Lakeview have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lacy - Lakeview
    • Lacy - Lakeview is located in McLennan County
    • Population from the 2020 Census: 6,803 people
    • Jump to TripAdvisor's Tourism page for Lacy - Lakeview <2>
  • Laguna Park
    (17 miles [27.4 km] to the west)
  • Leroy
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Leroy have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Leroy
    • Leroy is located in McLennan County
    • Population from the 2020 Census: 346 people
    • Jump to TripAdvisor's Tourism page for Leroy <2>
  • Malone
    (14 miles [22.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Malone have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Malone
    • Malone is located in Hill County
    • Population from the 2020 Census: 285 people
    • Jump to TripAdvisor's Tourism page for Malone <2>
  • Mart
    (23 miles [37 km] to the southeast)
    • Note: The GPS coordinates that we are using for Mart have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mart
    • Mart is located in McLennan County
    • Population from the 2020 Census: 1,983 people
    • Jump to TripAdvisor's Tourism page for Mart <2>
  • Mertens
    (21 miles [33.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Mertens have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mertens
    • Mertens is located in Hill County
    • Population from the 2020 Census: 131 people
    • Jump to TripAdvisor's Tourism page for Mertens <2>
  • Milford
    (23 miles [37 km] to the north)
    • Note: The GPS coordinates that we are using for Milford have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Milford
    • Milford is located in Ellis County
    • Population from the 2020 Census: 756 people
    • Jump to TripAdvisor's Tourism page for Milford <2>
  • Mount Calm
    (12 miles [19.3 km] to the east)
    • Note: The GPS coordinates that we are using for Mount Calm have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Calm
    • Mount Calm is located in Hill County
    • Population from the 2020 Census: 340 people
    • Jump to TripAdvisor's Tourism page for Mount Calm <2>
  • Otto
    (29 miles [46.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Otto have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Otto
    • Otto is located in Falls County
    • Jump to TripAdvisor's Tourism page for Otto <2>
  • Penelope
    (10 miles [16.1 km] to the east)
  • Perry
    (28 miles [45.1 km] to the south)
    • Note: The GPS coordinates that we are using for Perry have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Perry
    • Perry is located in Falls County
    • Jump to TripAdvisor's Tourism page for Perry <2>
  • Prairie Hill
    (20 miles [32.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Prairie Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Prairie Hill
    • Prairie Hill is located in Limestone County
    • Jump to TripAdvisor's Tourism page for Prairie Hill <2>
  • Purdon
    (29 miles [46.7 km] to the east)
    • Note: The GPS coordinates that we are using for Purdon have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Purdon
    • Purdon is located in Navarro County
    • Jump to TripAdvisor's Tourism page for Purdon <2>
  • Riesel
    (24 miles [38.6 km] to the southeast)
    • Note: The GPS coordinates that we are using for Riesel have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Riesel
    • Riesel is located in McLennan County
    • Population from the 2020 Census: 1,049 people
    • Jump to TripAdvisor's Tourism page for Riesel <2>
  • Robinson
    (23 miles [37 km] to the south)
  • Ross
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Ross have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ross
    • Ross is located in McLennan County
    • Population from the 2020 Census: 272 people
    • Jump to TripAdvisor's Tourism page for Ross <2>
  • Valley Mills
    (24 miles [38.6 km] to the southwest)
  • Waco
    (17 miles [27.4 km] to the south)
    • Jump to our Gazetteer entry for Waco
    • Waco is located in McLennan County
    • Population from the 2020 Census: 141,377 people
    • Jump to TripAdvisor's Tourism page for Waco <2>
  • Whitney
    (16 miles [25.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Whitney have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Whitney
    • Whitney is located in Hill County
    • Population from the 2020 Census: 2,145 people
    • Jump to TripAdvisor's Tourism page for Whitney <2>
  • Woodway
    (22 miles [35.4 km] to the south)
    • Note: The GPS coordinates that we are using for Woodway have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Woodway
    • Woodway is located in McLennan County
    • Population from the 2020 Census: 9,077 people
    • Jump to TripAdvisor's Tourism page for Woodway <2>

Unfortunately, we don't know of an official website for West. If you can help, please contact us through our Feedback Page.

The official website for McLennan County: www.co.mclennan.tx.us/

The official website for State of Texas: https://texas.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- West) to Point B.Our distance measurements begin at a specific point in West. The point we use is located at these GPS coordinates - Latitude: 31.8030, Longitude: -97.0945       In this case, the coordinates for West have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024