Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Tabor had a post office and no railroad service.
The following communities are listed based on their distance from Tabor, with the one closest to Tabor listed first.
- Benchley
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Benchley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Benchley
- Benchley is located in Robertson County
- Kurten
(6 miles [9.7 km] to the east)
- Wheelock
(7 miles [11.3 km] to the north)
- Bryan
(8 miles [12.9 km] to the south)
- Sutton
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Sutton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sutton
- Sutton is located in Robertson County
- College Station
(11 miles [17.7 km] to the south)
- Harvey
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Harvey have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harvey
- Harvey is located in Brazos County
- Mumford
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Mumford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mumford
- Mumford is located in Robertson County
- Jump to TripAdvisor's Tourism page for Mumford <3>
- Hearne
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Hearne have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hearne
- Hearne is located in Robertson County
- Population from the 2020 Census: 4,340 people
- Jump to TripAdvisor's Tourism page for Hearne <3>
- Elliot
(16 miles [25.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Elliot. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Elliot
- Elliot is located in Robertson County
- Google driving directions:
- From your current location to Elliot
- From Tabor to Elliot
- New Baden
(17 miles [27.4 km] to the north)
- Franklin
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Franklin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Franklin
- Franklin is located in Robertson County
- Population from the 2020 Census: 1,643 people
- Jump to TripAdvisor's Tourism page for Franklin <3>
- Iola
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Iola have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Iola
- Iola is located in Grimes County
- Population from the 2020 Census: 433 people
- Jump to TripAdvisor's Tourism page for Iola <3>
- Zulch ‑ Historic
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Zulch came from an uncertain source and they still need to be verified:<5>
- Jump to our Gazetteer entry for Zulch
- Zulch is located in Madison County
- Wellborn
(18 miles [29 km] to the south)
- Cooks Point
(19 miles [30.6 km] to the southwest)
- Tunis
(19 miles [30.6 km] to the southwest)
- Keith
(19 miles [30.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Keith have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Keith
- Keith is located in Grimes County
- Gause
(20 miles [32.2 km] to the west)
- Calvert
(21 miles [33.8 km] to the northwest)
- Merle ‑ Historic
(24 miles [38.6 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Merle. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Merle
- Merle is located in Burleson County
- Google driving directions:
- From your current location to Merle
- From Tabor to Merle
- Millican
(24 miles [38.6 km] to the southeast)
- Nesbitt
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Nesbitt have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nesbitt
- Nesbitt is located in Robertson County
- Branchville
(24 miles [38.6 km] to the west)
- Note: The GPS coordinates that we are using for Branchville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Branchville
- Branchville is located in Milam County
- Bedias
(25 miles [40.2 km] to the east)
Off-the-Road Links ...
The official website for Brazos County: www.co.brazos.tx.us/
The official website for State of Texas: https://texas.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Tabor, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database. |