Census Data for Saint Elijah Village

As far as we can tell, Saint Elijah Village has not been included in past Census counts, so there is no population information for this community.

While we don't have census information for Saint Elijah Village, you might be interested in some nearby communities where we do:

• Copperas Cove
  (10 miles [16.1 km] to the southwest)
  • Note: The GPS coordinates that we are using for Copperas Cove have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for Copperas Cove
  • Copperas Cove is located in Bell County
  • Jump to TripAdvisor's Tourism page for Copperas Cove <2>
• Killeen
  (10 miles [16.1 km] to the south)
  • Note: The GPS coordinates that we are using for Killeen have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for Killeen
  • Killeen is located in Bell County
  • Jump to TripAdvisor's Tourism page for Killeen <2>
• Fort Gates
  (13 miles [20.9 km] to the north)
  • Note: The GPS coordinates that we are using for Fort Gates have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for Fort Gates
  • Fort Gates is located in Coryell County
• Gatesville
  (14 miles [22.5 km] to the north)
  • Jump to our Gazetteer entry for Gatesville
  • Gatesville is located in Coryell County
  • Jump to TripAdvisor's Tourism page for Gatesville <2>
• Harker Heights
  (14 miles [22.5 km] to the southeast)
  • Note: The GPS coordinates that we are using for Harker Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for Harker Heights
  • Harker Heights is located in Bell County
  • Jump to TripAdvisor's Tourism page for Harker Heights <2>
• Kempner
  (14 miles [22.5 km] to the southwest)
  • Note: The GPS coordinates that we are using for Kempner have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for Kempner
  • Kempner is located in Lampasas County
  • Jump to TripAdvisor's Tourism page for Kempner <2>
• Nolanville
  (14 miles [22.5 km] to the southeast)
  • Jump to our Gazetteer entry for Nolanville
  • Nolanville is located in Bell County
  • Jump to TripAdvisor's Tourism page for Nolanville <2>
• South Mountain
  (16 miles [25.7 km] to the northeast)
  • Note: The GPS coordinates that we are using for South Mountain have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for South Mountain
  • South Mountain is located in Coryell County
• Morgan's Point Resort
  (20 miles [32.2 km] to the east)
  • Note: The GPS coordinates that we are using for Morgan's Point Resort have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for Morgan's Point Resort
  • Morgan's Point Resort is located in Bell County
  • Jump to TripAdvisor's Tourism page for Morgan's Point Resort <2>
• Oglesby
  (21 miles [33.8 km] to the northeast)
  • Note: The GPS coordinates that we are using for Oglesby have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for Oglesby
  • Oglesby is located in Coryell County
  • Jump to TripAdvisor's Tourism page for Oglesby <2>
• Belton
  (22 miles [35.4 km] to the southeast)
  • Jump to our Gazetteer entry for Belton
  • Belton is located in Bell County
  • Jump to TripAdvisor's Tourism page for Belton <2>
• Salado
  (24 miles [38.6 km] to the southeast)
  • Jump to our Gazetteer entry for Salado
  • Salado is located in Bell County
  • The population in 2015 was estimated at 2,140 people. This represents a 0.66% increase since 2010.The 2010 Census gave a population of 2,126 people.
  • Jump to TripAdvisor's Tourism page for Salado <2>
• Continue List   (106 more) ...
  • Lampasas
    (25 miles [40.2 km] to the southwest)
    • Jump to our Gazetteer entry for Lampasas
    • Lampasas is located in Lampasas County
    • Jump to TripAdvisor's Tourism page for Lampasas <2>
  • Moody
    (25 miles [40.2 km] to the east)
    • Jump to our Gazetteer entry for Moody
    • Moody is located in McLennan County
    • Jump to TripAdvisor's Tourism page for Moody <2>
  • Florence
    (26 miles [41.8 km] to the south)
    • Note: The GPS coordinates that we are using for Florence have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Florence
    • Florence is located in Williamson County
    • Jump to TripAdvisor's Tourism page for Florence <2>

Coryell County ...

Saint Elijah Village is located in Coryell County<3>.

For more information, please visit our Census Page for Coryell County.

Miscellaneous Information for Saint Elijah Village ...

The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Coryell County or the community of Saint Elijah Village:

• The GNIS Codes ...
  • The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Saint Elijah Village:
  • GNIS ID for Saint Elijah Village: 1385376
  • GNIS ID for Coryell County: 1383835
  • GNIS ID for State of Texas: 1779801

• Misc. Census Codes ...
  • Saint Elijah Village is located in Census Region #3 (the South Region) and Division #7 (the West South-Central Division).

For more information about the various Federal identification codes, please visit our Misc Page for Saint Elijah Village.

Off-the-Road Links ...

Unfortunately, we don't know of a website for Saint Elijah Village. If you can help, please contact us through our Feedback Page.

The official website for State of Texas: https://texas.gov/

The official website of the U.S. Board on Geographic Names (BGN)

The official website of the U.S. Geological Survey (USGS)