RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Wise County >> Runaway Bay >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Texas

The Commemorative Quarter for Texas





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Runaway Bay. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Runaway Bay.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Runaway Bay - within 30 miles [48.3 km]<1>.

Unless noted otherwise, the following communities are located in Wise County.

Our list sorts the communities in alphabetical order. There are 27 communities listed:

  • Alvord
    (15 miles [24.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Alvord have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Alvord
    • Alvord is located in Wise County
    • Population from the 2020 Census: 1,591 people
    • Jump to TripAdvisor's Tourism page for Alvord <3>
  • Aurora
    (22 miles [35.4 km] to the east)
    • Note: The GPS coordinates that we are using for Aurora have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Aurora
    • Aurora is located in Wise County
    • Population from the 2020 Census: 1,522 people
    • Jump to TripAdvisor's Tourism page for Aurora <3>
  • Azle
    (27 miles [43.5 km] to the southeast)
    • Jump to our Gazetteer entry for Azle
    • Azle is located in Parker County
    • Population from the 2020 Census: 13,607 people
    • Jump to TripAdvisor's Tourism page for Azle <3>
  • Bowie
    (26 miles [41.8 km] to the north)
    • Note: The GPS coordinates that we are using for Bowie have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bowie
    • Bowie is located in Montague County
    • Population from the 2020 Census: 5,140 people
    • Jump to TripAdvisor's Tourism page for Bowie <3>
  • Boyd
    (18 miles [29 km] to the east)
  • Bridgeport
    (6 miles [9.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Bridgeport have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bridgeport
    • Bridgeport is located in Wise County
    • Population from the 2020 Census: 6,637 people
    • Jump to TripAdvisor's Tourism page for Bridgeport <3>
  • Bryson
    (30 miles [48.3 km] to the west)
    • Note: The GPS coordinates that we are using for Bryson have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bryson
    • Bryson is located in Jack County
    • Population from the 2020 Census: 533 people
    • Jump to TripAdvisor's Tourism page for Bryson <3>
  • Chico
    (9 miles [14.5 km] to the northeast)
  • Decatur
    (16 miles [25.7 km] to the east)
  • Forestburg
    (30 miles [48.3 km] to the northeast)
  • Graford
    (27 miles [43.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Graford have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Graford
    • Graford is located in Palo Pinto County
    • Population from the 2020 Census: 631 people
    • Jump to TripAdvisor's Tourism page for Graford <3>
  • Greenwood
    (26 miles [41.8 km] to the northeast)
  • Jacksboro
    (16 miles [25.7 km] to the west)
  • Jermyn
    (30 miles [48.3 km] to the west)
  • Millsap
    (30 miles [48.3 km] to the south)
    • Note: The GPS coordinates that we are using for Millsap have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Millsap
    • Millsap is located in Parker County
    • Population from the 2020 Census: 470 people
    • Jump to TripAdvisor's Tourism page for Millsap <3>
  • Mineral Wells
    (27 miles [43.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Mineral Wells have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mineral Wells
    • Mineral Wells is located in Palo Pinto County
    • Population from the 2020 Census: 15,219 people
    • Jump to TripAdvisor's Tourism page for Mineral Wells <3>
  • Newark
    (25 miles [40.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Newark have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Newark
    • Newark is located in Wise County
    • Population from the 2020 Census: 1,251 people
    • Jump to TripAdvisor's Tourism page for Newark <3>
  • Paradise
    (10 miles [16.1 km] to the east)
    • Note: The GPS coordinates that we are using for Paradise have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Paradise
    • Paradise is located in Wise County
    • Population from the 2020 Census: 594 people
    • Jump to TripAdvisor's Tourism page for Paradise <3>
  • Peaster
    (21 miles [33.8 km] to the south)
  • Perrin
    (15 miles [24.1 km] to the southwest)
  • Poolville
    (13 miles [20.9 km] to the south)
    • Note: The GPS coordinates that we are using for Poolville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Poolville
    • Poolville is located in Parker County
    • Jump to TripAdvisor's Tourism page for Poolville <3>
  • Rhome
    (24 miles [38.6 km] to the east)
    • Note: The GPS coordinates that we are using for Rhome have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rhome
    • Rhome is located in Wise County
    • Population from the 2020 Census: 1,872 people
    • Jump to TripAdvisor's Tourism page for Rhome <3>
  • Slidell
    (30 miles [48.3 km] to the northeast)
  • Springtown
    (18 miles [29 km] to the southeast)
  • Sunset
    (20 miles [32.2 km] to the north)
  • Weatherford
    (29 miles [46.7 km] to the south)
  • Whitt
    (17 miles [27.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Whitt have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Whitt
    • Whitt is located in Parker County
    • Jump to TripAdvisor's Tourism page for Whitt <3>

Unfortunately, we don't know of an official website for Runaway Bay. If you can help, please contact us through our Feedback Page.

The official website for Wise County: www.co.wise.tx.us/

The official website for State of Texas: https://texas.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Runaway Bay) to Point B.Our distance measurements begin at a specific point in Runaway Bay. The point we use is located at these GPS coordinates - Latitude: 33.1776, Longitude: -97.8699       In this case, the coordinates for Runaway Bay have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024