RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Falls County >> Rosebud >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
Texas


The Commemorative Quarter for Texas







Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

The Rand McNally Atlas shows that in 1895, Rosebud had a post office and railroad service. In 2020, Rosebud had a population of 1,344 people.

The following communities are listed based on their distance from Rosebud, with the one closest to Rosebud listed first.

  • Burlington
    (4 miles [6.4 km] to the south)
  • Travis
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for Travis have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Travis
    • Travis is located in Falls County
  • Wilderville
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for Wilderville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wilderville
    • Wilderville is located in Falls County
  • Clarkson
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Clarkson have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clarkson
    • Clarkson is located in Milam County
  • Ben Arnold
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Ben Arnold have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ben Arnold
    • Ben Arnold is located in Milam County
  • Barclay
    (7 miles [11.3 km] to the west)
    • Note: The GPS coordinates that we are using for Barclay have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Barclay
    • Barclay is located in Falls County
  • Baileyville
    (8 miles [12.9 km] to the east)
    • Jump to our Gazetteer entry for Baileyville
    • Baileyville is located in Milam County
  • Westphalia
    (8 miles [12.9 km] to the west)
    • Note: The GPS coordinates that we are using for Westphalia have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Westphalia
    • Westphalia is located in Falls County
  • Lott
    (9 miles [14.5 km] to the north)
    • Note: The GPS coordinates that we are using for Lott have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lott
    • Lott is located in Falls County
    • Population from the 2020 Census: 744 people
    • Jump to TripAdvisor's Tourism page for Lott <2>
  • Ocker
    (9 miles [14.5 km] to the west)
    • Note: The GPS coordinates that we are using for Ocker have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ocker
    • Ocker is located in Bell County
  • Cyclone
    (10 miles [16.1 km] to the west)
    • Note: The GPS coordinates that we are using for Cyclone have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cyclone
    • Cyclone is located in Bell County
  • Jones Prairie
    (11 miles [17.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Jones Prairie have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jones Prairie
    • Jones Prairie is located in Milam County
  • Durango
    (12 miles [19.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Durango have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Durango
    • Durango is located in Falls County
  • Maysfield
    (14 miles [22.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Maysfield have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Maysfield
    • Maysfield is located in Milam County
    • Jump to TripAdvisor's Tourism page for Maysfield <2>
  • Seaton
    (14 miles [22.5 km] to the west)
    • Note: The GPS coordinates that we are using for Seaton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Seaton
    • Seaton is located in Bell County
  • Cameron
    (15 miles [24.1 km] to the south)
  • Chilton
    (15 miles [24.1 km] to the north)
  • Hammond
    (15 miles [24.1 km] to the east)
    • Note: The GPS coordinates that we are using for Hammond have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hammond
    • Hammond is located in Robertson County
  • Reagan
    (15 miles [24.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Reagan have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Reagan
    • Reagan is located in Falls County
    • Jump to TripAdvisor's Tourism page for Reagan <2>
  • Belfalls
    (15 miles [24.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Belfalls have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Belfalls
    • Belfalls is located in Bell County
  • Oenaville
    (15 miles [24.1 km] to the west)
    • Note: The GPS coordinates that we are using for Oenaville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oenaville
    • Oenaville is located in Bell County
  • Buckholts
    (16 miles [25.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Buckholts have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Buckholts
    • Buckholts is located in Milam County
    • Population from the 2020 Census: 518 people
    • Jump to TripAdvisor's Tourism page for Buckholts <2>
  • Marlin
    (16 miles [25.7 km] to the north)
  • Rogers
    (17 miles [27.4 km] to the southwest)
  • Blevins
    (17 miles [27.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Blevins have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Blevins
    • Blevins is located in Falls County

Unfortunately, we don't know of an official website for Rosebud. If you can help, please contact us through our Feedback Page.

The official website for State of Texas: https://texas.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Rosebud, please let us know so that we can improve our accuracy.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024