RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Navarro County >> Pelham >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Texas

The Commemorative Quarter for Texas





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Pelham (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Pelham. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Pelham is located in Navarro County.

To see how the shape of Texas' counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Navarro County: Anderson, Ellis, Freestone, Henderson, Hill & Limestone.

Below are the counties that are near Pelham. For each of these counties, we show a sample of those communities that are closest to Pelham:

  • Navarro County     (The home county of Pelham)
    • The following are listed by their distance from Pelham, with the one closest to Pelham listed first.
    • Spring Hill
      (5 miles [8 km] to the east)
      • Jump to our Gazetteer entry for Spring Hill
      • Spring Hill is located in Navarro County
    • Dawson
      (6 miles [9.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Dawson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dawson
      • Dawson is located in Navarro County
      • Population from the 2020 Census: 798 people
      • Jump to TripAdvisor's Tourism page for Dawson <2>
    • Navarro Mills
      (7 miles [11.3 km] to the east)
      • Jump to our Gazetteer entry for Navarro Mills
      • Navarro Mills is located in Navarro County
    • Frost
      (8 miles [12.9 km] to the north)
    • Dresden
      (8 miles [12.9 km] to the northeast)
      • Jump to our Gazetteer entry for Dresden
      • Dresden is located in Navarro County
    • Silver City
      (9 miles [14.5 km] to the east)
      • Note: The GPS coordinates that we are using for Silver City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Silver City
      • Silver City is located in Navarro County
    • Blooming Grove
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Blooming Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blooming Grove
      • Blooming Grove is located in Navarro County
      • Population from the 2020 Census: 831 people
      • Jump to TripAdvisor's Tourism page for Blooming Grove <2>
    • Purdon
      (11 miles [17.7 km] to the east)
      • Note: The GPS coordinates that we are using for Purdon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Purdon
      • Purdon is located in Navarro County
      • Jump to TripAdvisor's Tourism page for Purdon <2>
    • Barry
      (13 miles [20.9 km] to the northeast)
    • Cryer Creek ‑ Historic
      (14 miles [22.5 km] to the northeast)
      • Jump to our Gazetteer entry for Cryer Creek
      • Cryer Creek is located in Navarro County
    • Oak Valley
      (17 miles [27.4 km] to the east)
      • Note: The GPS coordinates that we are using for Oak Valley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oak Valley
      • Oak Valley is located in Navarro County
      • Population from the 2020 Census: 427 people
    • Emhouse
      (19 miles [30.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Emhouse have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Emhouse
      • Emhouse is located in Navarro County
      • Population from the 2020 Census: 154 people
  • Ellis County
    • The following are listed by their distance from Pelham, with the one closest to Pelham listed first.
    • Milford
      (13 miles [20.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for Milford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Milford
      • Milford is located in Ellis County
      • Population from the 2020 Census: 756 people
      • Jump to TripAdvisor's Tourism page for Milford <2>
    • Avalon
      (16 miles [25.7 km] to the north)
      • Note: The GPS coordinates that we are using for Avalon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Avalon
      • Avalon is located in Ellis County
      • Jump to TripAdvisor's Tourism page for Avalon <2>
    • Italy
      (16 miles [25.7 km] to the north)
      • Note: The GPS coordinates that we are using for Italy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Italy
      • Italy is located in Ellis County
      • Population from the 2020 Census: 1,964 people
      • Jump to TripAdvisor's Tourism page for Italy <2>
    • Forreston
      (20 miles [32.2 km] to the north)
    • Nash
      (21 miles [33.8 km] to the north)
      • Jump to our Gazetteer entry for Nash
      • Nash is located in Ellis County
    • Bardwell
      (22 miles [35.4 km] to the north)
      • Note: The GPS coordinates that we are using for Bardwell have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bardwell
      • Bardwell is located in Ellis County
      • Population from the 2020 Census: 709 people
      • Jump to TripAdvisor's Tourism page for Bardwell <2>
    • Howard
      (22 miles [35.4 km] to the north)
      • Jump to our Gazetteer entry for Howard
      • Howard is located in Ellis County
    • Boz
      (25 miles [40.2 km] to the north)
      • Jump to our Gazetteer entry for Boz
      • Boz is located in Ellis County
    • Alma
      (26 miles [41.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Alma have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Alma
      • Alma is located in Ellis County
      • Population from the 2020 Census: 400 people
    • Ennis
      (27 miles [43.5 km] to the north)
    • Maypearl
      (27 miles [43.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Maypearl have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Maypearl
      • Maypearl is located in Ellis County
      • Population from the 2020 Census: 1,046 people
      • Jump to TripAdvisor's Tourism page for Maypearl <2>
    • Auburn
      (28 miles [45.1 km] to the northwest)
      • Jump to our Gazetteer entry for Auburn
      • Auburn is located in Ellis County
  • Freestone County
    • The following are listed by their distance from Pelham, with the one closest to Pelham listed first.
    • Wortham
      (23 miles [37 km] to the southeast)
      • Note: The GPS coordinates that we are using for Wortham have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wortham
      • Wortham is located in Freestone County
      • Population from the 2020 Census: 1,007 people
      • Jump to TripAdvisor's Tourism page for Wortham <2>
    • Streetman
      (28 miles [45.1 km] to the east)
    • Kirvin
      (30 miles [48.3 km] to the southeast)
  • Hill County
    • The following are listed by their distance from Pelham, with the one closest to Pelham listed first.
    • Irene
      (4 miles [6.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Irene have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Irene
      • Irene is located in Hill County
      • Jump to TripAdvisor's Tourism page for Irene <2>
    • Malone
      (6 miles [9.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Malone have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Malone
      • Malone is located in Hill County
      • Population from the 2020 Census: 285 people
      • Jump to TripAdvisor's Tourism page for Malone <2>
    • Hubbard
      (7 miles [11.3 km] to the south)
      • Note: The GPS coordinates that we are using for Hubbard have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hubbard
      • Hubbard is located in Hill County
      • Population from the 2020 Census: 1,418 people
      • Jump to TripAdvisor's Tourism page for Hubbard <2>
    • Mertens
      (8 miles [12.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for Mertens have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mertens
      • Mertens is located in Hill County
      • Population from the 2020 Census: 131 people
      • Jump to TripAdvisor's Tourism page for Mertens <2>
    • Penelope
      (9 miles [14.5 km] to the southwest)
    • Brandon
      (10 miles [16.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Brandon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Brandon
      • Brandon is located in Hill County
      • Jump to TripAdvisor's Tourism page for Brandon <2>
    • Bynum
      (11 miles [17.7 km] to the west)
      • Note: The GPS coordinates that we are using for Bynum have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bynum
      • Bynum is located in Hill County
      • Population from the 2020 Census: 208 people
      • Jump to TripAdvisor's Tourism page for Bynum <2>
    • Mount Calm
      (14 miles [22.5 km] to the south)
      • Note: The GPS coordinates that we are using for Mount Calm have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Calm
      • Mount Calm is located in Hill County
      • Population from the 2020 Census: 340 people
      • Jump to TripAdvisor's Tourism page for Mount Calm <2>
    • Carl's Corner
      (16 miles [25.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Carl's Corner have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Carl's Corner
      • Carl's Corner is located in Hill County
      • Population from the 2020 Census: 199 people
    • Abbott
      (16 miles [25.7 km] to the west)
    • Chatt
      (16 miles [25.7 km] to the west)
      • Jump to our Gazetteer entry for Chatt
      • Chatt is located in Hill County
    • Hillsboro
      (19 miles [30.6 km] to the west)
  • Johnson County
    • Grandview
      (30 miles [48.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Grandview have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Grandview
      • Grandview is located in Johnson County
      • Population from the 2020 Census: 1,817 people
      • Jump to TripAdvisor's Tourism page for Grandview <2>
  • Limestone County
    • The following are listed by their distance from Pelham, with the one closest to Pelham listed first.
    • Coolidge
      (16 miles [25.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Coolidge have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Coolidge
      • Coolidge is located in Limestone County
      • Population from the 2020 Census: 950 people
      • Jump to TripAdvisor's Tourism page for Coolidge <2>
    • Delia ‑ Historic
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Delia have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Delia
      • Delia is located in Limestone County
    • Prairie Hill
      (21 miles [33.8 km] to the south)
      • Note: The GPS coordinates that we are using for Prairie Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Prairie Hill
      • Prairie Hill is located in Limestone County
      • Jump to TripAdvisor's Tourism page for Prairie Hill <2>
    • Tehuacana
      (21 miles [33.8 km] to the southeast)
    • Watt
      (22 miles [35.4 km] to the south)
      • Jump to our Gazetteer entry for Watt
      • Watt is located in Limestone County
    • Frosa
      (23 miles [37 km] to the south)
      • Jump to our Gazetteer entry for Frosa
      • Frosa is located in Limestone County
    • Mexia
      (26 miles [41.8 km] to the southeast)
      • Jump to our Gazetteer entry for Mexia
      • Mexia is located in Limestone County
      • Population from the 2020 Census: 7,287 people
      • Jump to TripAdvisor's Tourism page for Mexia <2>
  • McLennan County
    • The following are listed by their distance from Pelham, with the one closest to Pelham listed first.
    • Tours
      (19 miles [30.6 km] to the southwest)
      • Jump to our Gazetteer entry for Tours
      • Tours is located in McLennan County
    • Leroy
      (20 miles [32.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Leroy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Leroy
      • Leroy is located in McLennan County
      • Population from the 2020 Census: 346 people
      • Jump to TripAdvisor's Tourism page for Leroy <2>
    • West
      (20 miles [32.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for West have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West
      • West is located in McLennan County
      • Population from the 2020 Census: 2,969 people
      • Jump to TripAdvisor's Tourism page for West <2>
    • Axtell
      (22 miles [35.4 km] to the southwest)
    • Elk
      (24 miles [38.6 km] to the south)
      • Jump to our Gazetteer entry for Elk
      • Elk is located in McLennan County
    • Ross
      (24 miles [38.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Ross have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ross
      • Ross is located in McLennan County
      • Population from the 2020 Census: 272 people
      • Jump to TripAdvisor's Tourism page for Ross <2>
    • Hallsburg
      (26 miles [41.8 km] to the south)
      • Note: The GPS coordinates that we are using for Hallsburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hallsburg
      • Hallsburg is located in McLennan County
      • Population from the 2020 Census: 454 people
    • Elm Mott
      (26 miles [41.8 km] to the southwest)
    • Mart
      (28 miles [45.1 km] to the south)
      • Note: The GPS coordinates that we are using for Mart have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mart
      • Mart is located in McLennan County
      • Population from the 2020 Census: 1,983 people
      • Jump to TripAdvisor's Tourism page for Mart <2>
    • Northcrest
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Northcrest have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Northcrest
      • Northcrest is located in McLennan County
    • Bellmead
      (29 miles [46.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Bellmead have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bellmead
      • Bellmead is located in McLennan County
      • Population from the 2020 Census: 10,835 people
      • Jump to TripAdvisor's Tourism page for Bellmead <2>
    • Gholson
      (29 miles [46.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Gholson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gholson
      • Gholson is located in McLennan County
      • Population from the 2020 Census: 1,127 people

For an expanded list of the communities that are closest to Pelham, see our County-by-County Page for Pelham.

Newspapers Published in Pelham ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 99 newspapers that have been published in the area around Pelham.

Although we're unaware of any newspapers that were published in the immediate area of Pelham, there are papers which were published within 30 miles [48.3 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Pelham.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first turn to the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Pelham:

Cemeteries Near Pelham ...

Below are cemeteries that are in the vicinity of Pelham.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Pelham covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Pelham, with the one closest to Pelham listed first.

  • Pelham Cemetery
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for the Pelham Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Pelham Cemetery
  • Salem Cemetery
    (2 miles [3.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Salem Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Salem Cemetery
  • Graham Cemetery
    (2 miles [3.2 km] to the west)
    • Note: The GPS coordinates that we are using for the Graham Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Graham Cemetery
  • Lawrence Cemetery
    (3 miles [4.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Lawrence Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Lawrence Cemetery
  • Union Hill Cemetery
    (3 miles [4.8 km] to the northwest)
  • Walling Cemetery
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for the Walling Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Walling Cemetery
  • Antioch Cemetery
    (4 miles [6.4 km] to the southeast)
  • Liberty Hill Cemetery
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Liberty Hill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Liberty Hill Cemetery
  • Salem Cemetery
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for the Salem Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Salem Cemetery
  • Cottonwood Cemetery
    (6 miles [9.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Cottonwood Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Cottonwood Cemetery
  • McLain Cemetery
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for the McLain Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the McLain Cemetery
  • Spring Hill Cemetery
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for the Spring Hill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Spring Hill Cemetery
  • Continue List   (151 more) ...
    • Pevehouse Cemetery
      (6 miles [9.7 km] to the north)
    • Richland Cemetery
      (6 miles [9.7 km] to the northwest)
    • Burross Cemetery
      (7 miles [11.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for the Burross Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Burross Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

While we didn't find Pelham in the Atlas, the following 1895 communities would have been found near the current location of Pelham.

These communities are listed based on their distance from Pelham, with the one closest to Pelham listed first.

  • Emmett
    (2 miles [3.2 km] to the north)
    • Note: The GPS coordinates that we are using for Emmett have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Emmett
    • Emmett is located in Navarro County
  • Irene
    (4 miles [6.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Irene have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Irene
    • Irene is located in Hill County
    • Jump to TripAdvisor's Tourism page for Irene <2>
  • Spring Hill
    (5 miles [8 km] to the east)
    • Jump to our Gazetteer entry for Spring Hill
    • Spring Hill is located in Navarro County
  • Dawson
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Dawson have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dawson
    • Dawson is located in Navarro County
    • Population from the 2020 Census: 798 people
    • Jump to TripAdvisor's Tourism page for Dawson <2>
  • Hubbard
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Hubbard have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hubbard
    • Hubbard is located in Hill County
    • Population from the 2020 Census: 1,418 people
    • Jump to TripAdvisor's Tourism page for Hubbard <2>
  • Frost
    (8 miles [12.9 km] to the north)
  • Dresden
    (8 miles [12.9 km] to the northeast)
    • Jump to our Gazetteer entry for Dresden
    • Dresden is located in Navarro County
  • Mertens
    (8 miles [12.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Mertens have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mertens
    • Mertens is located in Hill County
    • Population from the 2020 Census: 131 people
    • Jump to TripAdvisor's Tourism page for Mertens <2>
  • Blooming Grove
    (10 miles [16.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Blooming Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Blooming Grove
    • Blooming Grove is located in Navarro County
    • Population from the 2020 Census: 831 people
    • Jump to TripAdvisor's Tourism page for Blooming Grove <2>
  • Brandon
    (10 miles [16.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Brandon have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brandon
    • Brandon is located in Hill County
    • Jump to TripAdvisor's Tourism page for Brandon <2>
  • Purdon
    (11 miles [17.7 km] to the east)
    • Note: The GPS coordinates that we are using for Purdon have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Purdon
    • Purdon is located in Navarro County
    • Jump to TripAdvisor's Tourism page for Purdon <2>
  • Bynum
    (11 miles [17.7 km] to the west)
    • Note: The GPS coordinates that we are using for Bynum have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bynum
    • Bynum is located in Hill County
    • Population from the 2020 Census: 208 people
    • Jump to TripAdvisor's Tourism page for Bynum <2>
  • Continue List   (17 more) ...
    • Barry
      (13 miles [20.9 km] to the northeast)
    • Milford
      (13 miles [20.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for Milford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Milford
      • Milford is located in Ellis County
      • Population from the 2020 Census: 756 people
      • Jump to TripAdvisor's Tourism page for Milford <2>
    • Mount Calm
      (14 miles [22.5 km] to the south)
      • Note: The GPS coordinates that we are using for Mount Calm have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Calm
      • Mount Calm is located in Hill County
      • Population from the 2020 Census: 340 people
      • Jump to TripAdvisor's Tourism page for Mount Calm <2>

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Pelham. See our List of 1890's Communities around Pelham.

Unfortunately, we don't know of a website for Pelham. If you can help, please contact us through our Feedback Page.

The official website for State of Texas: https://texas.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Pelham) to Point B.Our distance measurements begin at a specific point in Pelham. The point we use is located at these GPS coordinates - Latitude: 31.9596, Longitude: -96.8053       In this case, the coordinates for Pelham have been provided by the Geographic Names Information System (GNIS).
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Pelham, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024