RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Coryell County >> Oglesby >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Texas

The Commemorative Quarter for Texas





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Oglesby. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Oglesby.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Oglesby - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 34 communities listed:

  • Bellmead
    (27 miles [43.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Bellmead have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bellmead
    • Bellmead is located in McLennan County
    • Population from the 2020 Census: 10,835 people
    • Jump to TripAdvisor's Tourism page for Bellmead <3>
  • Belton
    (25 miles [40.2 km] to the south)
  • Bruceville
    (17 miles [27.4 km] to the east)
  • Chilton
    (28 miles [45.1 km] to the east)
  • China Spring
    (20 miles [32.2 km] to the northeast)
  • Clifton
    (25 miles [40.2 km] to the north)
    • Note: The GPS coordinates that we are using for Clifton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clifton
    • Clifton is located in Bosque County
    • Population from the 2020 Census: 3,410 people
    • Jump to TripAdvisor's Tourism page for Clifton <3>
  • Cranfills Gap
    (30 miles [48.3 km] to the northwest)
  • Crawford
    (9 miles [14.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Crawford have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Crawford
    • Crawford is located in McLennan County
    • Population from the 2020 Census: 870 people
    • Jump to TripAdvisor's Tourism page for Crawford <3>
  • Eddy
    (17 miles [27.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Eddy have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Eddy
    • Eddy is located in McLennan County
    • Jump to TripAdvisor's Tourism page for Eddy <3>
  • Elm Mott
    (29 miles [46.7 km] to the northeast)
  • Flat
    (10 miles [16.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Flat have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Flat
    • Flat is located in Coryell County
    • Jump to TripAdvisor's Tourism page for Flat <3>
  • Fort Hood
    (25 miles [40.2 km] to the southwest)
  • Gatesville
    (13 miles [20.9 km] to the west)
  • Harker Heights
    (26 miles [41.8 km] to the south)
    • Note: The GPS coordinates that we are using for Harker Heights have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Harker Heights
    • Harker Heights is located in Bell County
    • Population from the 2020 Census: 33,071 people
    • Jump to TripAdvisor's Tourism page for Harker Heights <3>
  • Heidenheimer
    (30 miles [48.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Heidenheimer have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Heidenheimer
    • Heidenheimer is located in Bell County
    • Jump to TripAdvisor's Tourism page for Heidenheimer <3>
  • Hewitt
    (18 miles [29 km] to the east)
    • Jump to our Gazetteer entry for Hewitt
    • Hewitt is located in McLennan County
    • Population from the 2020 Census: 15,113 people
    • Jump to TripAdvisor's Tourism page for Hewitt <3>
  • Jonesboro
    (25 miles [40.2 km] to the northwest)
  • Killeen
    (26 miles [41.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Killeen have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Killeen
    • Killeen is located in Bell County
    • Population from the 2020 Census: 153,991 people
    • Jump to TripAdvisor's Tourism page for Killeen <3>
  • Lacy - Lakeview
    (27 miles [43.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Lacy - Lakeview have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lacy - Lakeview
    • Lacy - Lakeview is located in McLennan County
    • Population from the 2020 Census: 6,803 people
    • Jump to TripAdvisor's Tourism page for Lacy - Lakeview <3>
  • Leon Junction
    (7 miles [11.3 km] to the southwest)
  • McGregor
    (6 miles [9.7 km] to the east)
  • Moody
    (11 miles [17.7 km] to the southeast)
    • Jump to our Gazetteer entry for Moody
    • Moody is located in McLennan County
    • Population from the 2020 Census: 1,433 people
    • Jump to TripAdvisor's Tourism page for Moody <3>
  • Morgan's Point Resort
    (18 miles [29 km] to the south)
    • Note: The GPS coordinates that we are using for Morgan's Point Resort have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Morgan's Point Resort
    • Morgan's Point Resort is located in Bell County
    • Population from the 2020 Census: 4,785 people
    • Jump to TripAdvisor's Tourism page for Morgan's Point Resort <3>
  • Mound
    (8 miles [12.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Mound have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mound
    • Mound is located in Coryell County
    • Jump to TripAdvisor's Tourism page for Mound <3>
  • Nolanville
    (24 miles [38.6 km] to the south)
  • Pendleton
    (18 miles [29 km] to the southeast)
    • Note: The GPS coordinates that we are using for Pendleton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pendleton
    • Pendleton is located in Bell County
    • Jump to TripAdvisor's Tourism page for Pendleton <3>
  • Purmela
    (26 miles [41.8 km] to the west)
    • Note: The GPS coordinates that we are using for Purmela have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Purmela
    • Purmela is located in Coryell County
    • Jump to TripAdvisor's Tourism page for Purmela <3>
  • Robinson
    (23 miles [37 km] to the east)
  • Satin
    (28 miles [45.1 km] to the east)
    • Note: The GPS coordinates that we are using for Satin have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Satin
    • Satin is located in Falls County
    • Jump to TripAdvisor's Tourism page for Satin <3>
  • Temple
    (24 miles [38.6 km] to the southeast)
  • Troy
    (19 miles [30.6 km] to the southeast)
    • Note: The GPS coordinates that we are using for Troy have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Troy
    • Troy is located in Bell County
    • Population from the 2020 Census: 2,191 people
    • Jump to TripAdvisor's Tourism page for Troy <3>
  • Valley Mills
    (16 miles [25.7 km] to the north)
  • Waco
    (23 miles [37 km] to the northeast)
    • Jump to our Gazetteer entry for Waco
    • Waco is located in McLennan County
    • Population from the 2020 Census: 141,377 people
    • Jump to TripAdvisor's Tourism page for Waco <3>
  • Woodway
    (17 miles [27.4 km] to the east)
    • Note: The GPS coordinates that we are using for Woodway have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Woodway
    • Woodway is located in McLennan County
    • Population from the 2020 Census: 9,077 people
    • Jump to TripAdvisor's Tourism page for Woodway <3>

Unfortunately, we don't know of an official website for Oglesby. If you can help, please contact us through our Feedback Page.

The official website for State of Texas: https://texas.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Oglesby) to Point B.Our distance measurements begin at a specific point in Oglesby. The point we use is located at these GPS coordinates - Latitude: 31.4186, Longitude: -97.5113       In this case, the coordinates for Oglesby have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024