RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Coryell County >> Oglesby >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Texas

The Commemorative Quarter for Texas





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Oglesby (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Oglesby. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most doctors and hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Oglesby is located in Coryell County.

To see how the shape of Texas' counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Coryell County: Bell, Bosque, Hamilton, Lampasas & McLennan.

Below are the counties that are near Oglesby. For each of these counties, we show a sample of those communities that are closest to Oglesby:

  • Coryell County     (The home county of Oglesby)
    • The following are listed by their distance from Oglesby, with the one closest to Oglesby listed first.
    • Lime City
      (Less than 2 miles to the southwest)
      • Note: The GPS coordinates that we are using for Lime City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lime City
      • Lime City is located in Coryell County
    • McGregor
      (6 miles [9.7 km] to the east)
    • Leon Junction
      (7 miles [11.3 km] to the southwest)
    • Mound
      (8 miles [12.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for Mound have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mound
      • Mound is located in Coryell County
      • Jump to TripAdvisor's Tourism page for Mound <2>
    • South Mountain
      (9 miles [14.5 km] to the west)
      • Note: The GPS coordinates that we are using for South Mountain have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for South Mountain
      • South Mountain is located in Coryell County
      • Population from the 2020 Census: 367 people
    • The Grove
      (10 miles [16.1 km] to the south)
      • Jump to our Gazetteer entry for The Grove
      • The Grove is located in Coryell County
    • Flat
      (10 miles [16.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Flat have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Flat
      • Flat is located in Coryell County
      • Jump to TripAdvisor's Tourism page for Flat <2>
    • Fort Gates
      (11 miles [17.7 km] to the west)
      • Note: The GPS coordinates that we are using for Fort Gates have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fort Gates
      • Fort Gates is located in Coryell County
    • Gatesville
      (13 miles [20.9 km] to the west)
    • Mason Crossing ‑ Historic
      (18 miles [29 km] to the southwest)
      • Note: The GPS coordinates that we are using for Mason Crossing have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mason Crossing
      • Mason Crossing is located in Coryell County
    • Turnersville
      (19 miles [30.6 km] to the northwest)
      • Jump to our Gazetteer entry for Turnersville
      • Turnersville is located in Coryell County
    • Saint Elijah Village
      (21 miles [33.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Saint Elijah Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saint Elijah Village
      • Saint Elijah Village is located in Coryell County
    • King
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for King have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for King
      • King is located in Coryell County
  • Bell County
    • The following are listed by their distance from Oglesby, with the one closest to Oglesby listed first.
    • Brookhaven
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Brookhaven have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Brookhaven
      • Brookhaven is located in Bell County
    • Morgan's Point Resort
      (18 miles [29 km] to the south)
      • Note: The GPS coordinates that we are using for Morgan's Point Resort have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Morgan's Point Resort
      • Morgan's Point Resort is located in Bell County
      • Population from the 2020 Census: 4,785 people
      • Jump to TripAdvisor's Tourism page for Morgan's Point Resort <2>
    • Pendleton
      (18 miles [29 km] to the southeast)
      • Note: The GPS coordinates that we are using for Pendleton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pendleton
      • Pendleton is located in Bell County
      • Jump to TripAdvisor's Tourism page for Pendleton <2>
    • Troy
      (19 miles [30.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Troy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Troy
      • Troy is located in Bell County
      • Population from the 2020 Census: 2,191 people
      • Jump to TripAdvisor's Tourism page for Troy <2>
    • Walker Village
      (23 miles [37 km] to the southwest)
      • Note: The GPS coordinates that we are using for Walker Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Walker Village
      • Walker Village is located in Bell County
    • Nolanville
      (24 miles [38.6 km] to the south)
    • Temple
      (24 miles [38.6 km] to the southeast)
    • Chaffee Village
      (24 miles [38.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Chaffee Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chaffee Village
      • Chaffee Village is located in Bell County
    • McNair Village
      (24 miles [38.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for McNair Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McNair Village
      • McNair Village is located in Bell County
    • Belton
      (25 miles [40.2 km] to the south)
    • Fort Hood
      (25 miles [40.2 km] to the southwest)
    • Harker Heights
      (26 miles [41.8 km] to the south)
      • Note: The GPS coordinates that we are using for Harker Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harker Heights
      • Harker Heights is located in Bell County
      • Population from the 2020 Census: 33,071 people
      • Jump to TripAdvisor's Tourism page for Harker Heights <2>
    • Killeen
      (26 miles [41.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Killeen have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Killeen
      • Killeen is located in Bell County
      • Population from the 2020 Census: 153,991 people
      • Jump to TripAdvisor's Tourism page for Killeen <2>
  • Bosque County
    • The following are listed by their distance from Oglesby, with the one closest to Oglesby listed first.
    • Valley Mills
      (16 miles [25.7 km] to the north)
    • Clifton
      (25 miles [40.2 km] to the north)
      • Note: The GPS coordinates that we are using for Clifton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Clifton
      • Clifton is located in Bosque County
      • Population from the 2020 Census: 3,410 people
      • Jump to TripAdvisor's Tourism page for Clifton <2>
    • Greenock
      (25 miles [40.2 km] to the north)
      • Note: The GPS coordinates that we are using for Greenock have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Greenock
      • Greenock is located in Bosque County
    • Womack
      (28 miles [45.1 km] to the north)
      • Jump to our Gazetteer entry for Womack
      • Womack is located in Bosque County
    • Cranfills Gap
      (30 miles [48.3 km] to the northwest)
  • Falls County
    • The following are listed by their distance from Oglesby, with the one closest to Oglesby listed first.
    • Bruceville - Eddy
      (17 miles [27.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Bruceville - Eddy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bruceville - Eddy
      • Bruceville - Eddy is located in Falls County
      • Population from the 2020 Census: 1,704 people
    • Mooreville
      (23 miles [37 km] to the east)
      • Jump to our Gazetteer entry for Mooreville
      • Mooreville is located in Falls County
    • Golinda
      (25 miles [40.2 km] to the east)
      • Note: The GPS coordinates that we are using for Golinda have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Golinda
      • Golinda is located in Falls County
      • Population from the 2020 Census: 610 people
    • Chilton
      (28 miles [45.1 km] to the east)
    • Satin
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for Satin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Satin
      • Satin is located in Falls County
      • Jump to TripAdvisor's Tourism page for Satin <2>
  • Hill County
    • Tyson
      (30 miles [48.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Tyson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tyson
      • Tyson is located in Hill County
  • McLennan County
    • The following are listed by their distance from Oglesby, with the one closest to Oglesby listed first.
    • Crawford
      (9 miles [14.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Crawford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Crawford
      • Crawford is located in McLennan County
      • Population from the 2020 Census: 870 people
      • Jump to TripAdvisor's Tourism page for Crawford <2>
    • Moody
      (11 miles [17.7 km] to the southeast)
      • Jump to our Gazetteer entry for Moody
      • Moody is located in McLennan County
      • Population from the 2020 Census: 1,433 people
      • Jump to TripAdvisor's Tourism page for Moody <2>
    • Bruceville
      (17 miles [27.4 km] to the east)
    • Lorena
      (17 miles [27.4 km] to the east)
      • Jump to our Gazetteer entry for Lorena
      • Lorena is located in McLennan County
    • Woodway
      (17 miles [27.4 km] to the east)
      • Note: The GPS coordinates that we are using for Woodway have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Woodway
      • Woodway is located in McLennan County
      • Population from the 2020 Census: 9,077 people
      • Jump to TripAdvisor's Tourism page for Woodway <2>
    • Speegleville
      (17 miles [27.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Speegleville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Speegleville
      • Speegleville is located in McLennan County
    • Eddy
      (17 miles [27.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Eddy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Eddy
      • Eddy is located in McLennan County
      • Jump to TripAdvisor's Tourism page for Eddy <2>
    • Hewitt
      (18 miles [29 km] to the east)
      • Jump to our Gazetteer entry for Hewitt
      • Hewitt is located in McLennan County
      • Population from the 2020 Census: 15,113 people
      • Jump to TripAdvisor's Tourism page for Hewitt <2>
    • China Spring
      (20 miles [32.2 km] to the northeast)
    • Beverly Hills
      (22 miles [35.4 km] to the east)
      • Note: The GPS coordinates that we are using for Beverly Hills have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beverly Hills
      • Beverly Hills is located in McLennan County
      • Population from the 2020 Census: 1,980 people
    • Bosqueville
      (22 miles [35.4 km] to the northeast)
      • Jump to our Gazetteer entry for Bosqueville
      • Bosqueville is located in McLennan County
    • Robinson
      (23 miles [37 km] to the east)
    • Rock Creek
      (23 miles [37 km] to the northeast)
      • Jump to our Gazetteer entry for Rock Creek
      • Rock Creek is located in McLennan County

For an expanded list of the communities that are closest to Oglesby, see our County-by-County Page for Oglesby.

Newspapers Published in Oglesby ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 50 newspapers that have been published in the area around Oglesby.

Although we're unaware of any newspapers that were published in the immediate area of Oglesby, there are papers which were published within 30 miles [48.3 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Oglesby.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Oglesby:

Cemeteries Near Oglesby ...

Below are cemeteries that are in the vicinity of Oglesby.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Oglesby covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Oglesby, with the one closest to Oglesby listed first.

  • Post Oak Cemetery
    (2 miles [3.2 km] to the south)
    • Note: The GPS coordinates that we are using for the Post Oak Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Post Oak Cemetery
  • Station Creek Cemetery
    (3 miles [4.8 km] to the south)
    • Note: The GPS coordinates that we are using for the Station Creek Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Station Creek Cemetery
  • Comanche Springs Cemetery
    (3 miles [4.8 km] to the east)
    • Note: The GPS coordinates that we are using for the Comanche Springs Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Comanche Springs Cemetery
  • Eagle Springs Cemetery
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Eagle Springs Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Eagle Springs Cemetery
  • Lamb Cemetery
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for the Lamb Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Lamb Cemetery
  • Blackfoot Cemetery
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for the Blackfoot Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Blackfoot Cemetery
  • Seaton Cemetery
    (7 miles [11.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Seaton Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Seaton Cemetery
  • Osage Cemetery
    (7 miles [11.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Osage Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Osage Cemetery
  • Greenbriar Cemetery
    (7 miles [11.3 km] to the west)
    • Note: The GPS coordinates that we are using for the Greenbriar Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Greenbriar Cemetery
  • Graham Cemetery
    (8 miles [12.9 km] to the south)
    • Note: The GPS coordinates that we are using for the Graham Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Graham Cemetery
  • Mound Cemetery
    (9 miles [14.5 km] to the southwest)
  • St. Paul Cemetery
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for the St. Paul Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St. Paul Cemetery
  • Continue List   (156 more) ...
    • Mt. Zion Cemetery
      (9 miles [14.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for the Mt. Zion Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Mt. Zion Cemetery
    • Crawford Cemetery
      (9 miles [14.5 km] to the northeast)
    • Coryell Valley Cemetery
      (9 miles [14.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for the Coryell Valley Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Coryell Valley Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

The Rand McNally Atlas shows that in 1895, Oglesby had a post office and railroad service. In 2020, Oglesby had a population of 464 people.

These communities are listed based on their distance from Oglesby, with the one closest to Oglesby listed first.

  • Lime City
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for Lime City have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lime City
    • Lime City is located in Coryell County
  • Pecan Grove ‑ Historic
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Pecan Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pecan Grove
    • Pecan Grove is located in Coryell County
  • McGregor
    (6 miles [9.7 km] to the east)
  • Leon Junction
    (7 miles [11.3 km] to the southwest)
  • Whitson
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Whitson have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Whitson
    • Whitson is located in Coryell County
  • Osage
    (7 miles [11.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Osage have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Osage
    • Osage is located in Coryell County
  • Mound
    (8 miles [12.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Mound have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mound
    • Mound is located in Coryell County
    • Jump to TripAdvisor's Tourism page for Mound <2>
  • Crawford
    (9 miles [14.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Crawford have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Crawford
    • Crawford is located in McLennan County
    • Population from the 2020 Census: 870 people
    • Jump to TripAdvisor's Tourism page for Crawford <2>
  • The Grove
    (10 miles [16.1 km] to the south)
    • Jump to our Gazetteer entry for The Grove
    • The Grove is located in Coryell County
  • Coryell
    (10 miles [16.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Coryell have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Coryell
    • Coryell is located in Coryell County
  • Moody
    (11 miles [17.7 km] to the southeast)
    • Jump to our Gazetteer entry for Moody
    • Moody is located in McLennan County
    • Population from the 2020 Census: 1,433 people
    • Jump to TripAdvisor's Tourism page for Moody <2>
  • Fort Gates
    (11 miles [17.7 km] to the west)
    • Note: The GPS coordinates that we are using for Fort Gates have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fort Gates
    • Fort Gates is located in Coryell County
  • Continue List   (15 more) ...
    • South Bosque
      (13 miles [20.9 km] to the east)
      • Note: The GPS coordinates that we are using for South Bosque have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for South Bosque
      • South Bosque is located in McLennan County
    • Gatesville
      (13 miles [20.9 km] to the west)
    • Moffat
      (15 miles [24.1 km] to the south)
      • Note: The GPS coordinates that we are using for Moffat have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Moffat
      • Moffat is located in Bell County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Oglesby. See our List of 1890's Communities around Oglesby.

Unfortunately, we don't know of a website for Oglesby. If you can help, please contact us through our Feedback Page.

The official website for State of Texas: https://texas.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Oglesby) to Point B.Our distance measurements begin at a specific point in Oglesby. The point we use is located at these GPS coordinates - Latitude: 31.4186, Longitude: -97.5113       In this case, the coordinates for Oglesby have been provided by the Geographic Names Information System (GNIS).
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Oglesby, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024