RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Ellis County >> Milford >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Texas

The Commemorative Quarter for Texas





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Milford. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Milford.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Milford - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 46 communities listed:

  • Abbott
    (17 miles [27.4 km] to the southwest)
  • Alvarado
    (25 miles [40.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for Alvarado have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Alvarado
    • Alvarado is located in Johnson County
    • Population from the 2020 Census: 4,624 people
    • Jump to TripAdvisor's Tourism page for Alvarado <2>
  • Aquilla
    (24 miles [38.6 km] to the southwest)
  • Avalon
    (11 miles [17.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Avalon have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Avalon
    • Avalon is located in Ellis County
    • Jump to TripAdvisor's Tourism page for Avalon <2>
  • Bardwell
    (18 miles [29 km] to the northeast)
    • Note: The GPS coordinates that we are using for Bardwell have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bardwell
    • Bardwell is located in Ellis County
    • Population from the 2020 Census: 709 people
    • Jump to TripAdvisor's Tourism page for Bardwell <2>
  • Barry
    (18 miles [29 km] to the east)
  • Blooming Grove
    (13 miles [20.9 km] to the east)
    • Note: The GPS coordinates that we are using for Blooming Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Blooming Grove
    • Blooming Grove is located in Navarro County
    • Population from the 2020 Census: 831 people
    • Jump to TripAdvisor's Tourism page for Blooming Grove <2>
  • Blum
    (26 miles [41.8 km] to the west)
    • Note: The GPS coordinates that we are using for Blum have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Blum
    • Blum is located in Hill County
    • Population from the 2020 Census: 476 people
    • Jump to TripAdvisor's Tourism page for Blum <2>
  • Brandon
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Brandon have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brandon
    • Brandon is located in Hill County
    • Jump to TripAdvisor's Tourism page for Brandon <2>
  • Bynum
    (10 miles [16.1 km] to the south)
    • Note: The GPS coordinates that we are using for Bynum have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bynum
    • Bynum is located in Hill County
    • Population from the 2020 Census: 208 people
    • Jump to TripAdvisor's Tourism page for Bynum <2>
  • Cleburne
    (29 miles [46.7 km] to the northwest)
  • Coolidge
    (30 miles [48.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Coolidge have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Coolidge
    • Coolidge is located in Limestone County
    • Population from the 2020 Census: 950 people
    • Jump to TripAdvisor's Tourism page for Coolidge <2>
  • Corsicana
    (28 miles [45.1 km] to the east)
  • Covington
    (18 miles [29 km] to the west)
    • Note: The GPS coordinates that we are using for Covington have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Covington
    • Covington is located in Hill County
    • Population from the 2020 Census: 283 people
    • Jump to TripAdvisor's Tourism page for Covington <2>
  • Dawson
    (20 miles [32.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Dawson have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dawson
    • Dawson is located in Navarro County
    • Population from the 2020 Census: 798 people
    • Jump to TripAdvisor's Tourism page for Dawson <2>
  • Ennis
    (23 miles [37 km] to the northeast)
  • Forreston
    (10 miles [16.1 km] to the northeast)
  • Frost
    (8 miles [12.9 km] to the east)
  • Glenn Heights
    (30 miles [48.3 km] to the north)
    • Note: The GPS coordinates that we are using for Glenn Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Glenn Heights
    • Glenn Heights is located in Dallas County
    • Population from the 2020 Census: 14,333 people
    • Jump to TripAdvisor's Tourism page for Glenn Heights <2>
  • Grandview
    (16 miles [25.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Grandview have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Grandview
    • Grandview is located in Johnson County
    • Population from the 2020 Census: 1,817 people
    • Jump to TripAdvisor's Tourism page for Grandview <2>
  • Hillsboro
    (12 miles [19.3 km] to the southwest)
  • Hubbard
    (20 miles [32.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Hubbard have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hubbard
    • Hubbard is located in Hill County
    • Population from the 2020 Census: 1,418 people
    • Jump to TripAdvisor's Tourism page for Hubbard <2>
  • Irene
    (9 miles [14.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Irene have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Irene
    • Irene is located in Hill County
    • Jump to TripAdvisor's Tourism page for Irene <2>
  • Italy
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Italy have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Italy
    • Italy is located in Ellis County
    • Population from the 2020 Census: 1,964 people
    • Jump to TripAdvisor's Tourism page for Italy <2>
  • Itasca
    (11 miles [17.7 km] to the west)
  • Keene
    (29 miles [46.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Keene have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Keene
    • Keene is located in Johnson County
    • Population from the 2020 Census: 6,588 people
    • Jump to TripAdvisor's Tourism page for Keene <2>
  • Laguna Park
    (30 miles [48.3 km] to the southwest)
  • Leroy
    (27 miles [43.5 km] to the south)
    • Note: The GPS coordinates that we are using for Leroy have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Leroy
    • Leroy is located in McLennan County
    • Population from the 2020 Census: 346 people
    • Jump to TripAdvisor's Tourism page for Leroy <2>
  • Lillian
    (30 miles [48.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Lillian have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lillian
    • Lillian is located in Johnson County
    • Jump to TripAdvisor's Tourism page for Lillian <2>
  • Malone
    (14 miles [22.5 km] to the south)
    • Note: The GPS coordinates that we are using for Malone have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Malone
    • Malone is located in Hill County
    • Population from the 2020 Census: 285 people
    • Jump to TripAdvisor's Tourism page for Malone <2>
  • Maypearl
    (13 miles [20.9 km] to the north)
    • Note: The GPS coordinates that we are using for Maypearl have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Maypearl
    • Maypearl is located in Ellis County
    • Population from the 2020 Census: 1,046 people
    • Jump to TripAdvisor's Tourism page for Maypearl <2>
  • Mertens
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Mertens have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mertens
    • Mertens is located in Hill County
    • Population from the 2020 Census: 131 people
    • Jump to TripAdvisor's Tourism page for Mertens <2>
  • Midlothian
    (25 miles [40.2 km] to the north)
  • Mount Calm
    (25 miles [40.2 km] to the south)
    • Note: The GPS coordinates that we are using for Mount Calm have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Calm
    • Mount Calm is located in Hill County
    • Population from the 2020 Census: 340 people
    • Jump to TripAdvisor's Tourism page for Mount Calm <2>
  • Ovilla
    (28 miles [45.1 km] to the north)
    • Note: The GPS coordinates that we are using for Ovilla have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ovilla
    • Ovilla is located in Dallas County
    • Population from the 2020 Census: 4,288 people
    • Jump to TripAdvisor's Tourism page for Ovilla <2>
  • Palmer
    (26 miles [41.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Palmer have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Palmer
    • Palmer is located in Ellis County
    • Population from the 2020 Census: 2,169 people
    • Jump to TripAdvisor's Tourism page for Palmer <2>
  • Penelope
    (17 miles [27.4 km] to the south)
  • Purdon
    (22 miles [35.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Purdon have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Purdon
    • Purdon is located in Navarro County
    • Jump to TripAdvisor's Tourism page for Purdon <2>
  • Red Oak
    (28 miles [45.1 km] to the north)
    • Note: The GPS coordinates that we are using for Red Oak have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Red Oak
    • Red Oak is located in Ellis County
    • Population from the 2020 Census: 14,098 people
    • Jump to TripAdvisor's Tourism page for Red Oak <2>
  • Rice
    (27 miles [43.5 km] to the east)
    • Jump to our Gazetteer entry for Rice
    • Rice is located in Navarro County
    • Population from the 2020 Census: 983 people
    • Jump to TripAdvisor's Tourism page for Rice <2>
  • Rio Vista
    (26 miles [41.8 km] to the west)
  • Ross
    (28 miles [45.1 km] to the south)
    • Note: The GPS coordinates that we are using for Ross have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ross
    • Ross is located in McLennan County
    • Population from the 2020 Census: 272 people
    • Jump to TripAdvisor's Tourism page for Ross <2>
  • Venus
    (23 miles [37 km] to the northwest)
  • Waxahachie
    (20 miles [32.2 km] to the north)
  • West
    (23 miles [37 km] to the south)
    • Note: The GPS coordinates that we are using for West have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for West
    • West is located in McLennan County
    • Population from the 2020 Census: 2,969 people
    • Jump to TripAdvisor's Tourism page for West <2>
  • Whitney
    (24 miles [38.6 km] to the southwest)
    • Note: The GPS coordinates that we are using for Whitney have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Whitney
    • Whitney is located in Hill County
    • Population from the 2020 Census: 2,145 people
    • Jump to TripAdvisor's Tourism page for Whitney <2>

Unfortunately, we don't know of an official website for Milford. If you can help, please contact us through our Feedback Page.

The official website for Ellis County: www.co.ellis.tx.us/

The official website for State of Texas: https://texas.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Milford) to Point B.Our distance measurements begin at a specific point in Milford. The point we use is located at these GPS coordinates - Latitude: 32.1192, Longitude: -96.9515       In this case, the coordinates for Milford have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024