RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Bell County >> Maxdale >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
Texas

The Commemorative Quarter for Texas





Nearest Communities to Maxdale,
Listed County-By-County

The purpose of this page is to identify those communities that are closest to Maxdale, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Maxdale:

We have great-grandparents who lived in a small community in the southeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.

Keep in mind that when we give a distance, it's a 'straight-line' distance from Maxdale.<1>

If you're researching your genealogy, we hope that the following information helps.

Although our information shows that the community of Maxdale is historic,<2> it would have been located within present day Bell County.

The following 7 counties adjoin and form the boundaries of Bell County: Burnet, Coryell, Falls, Lampasas, McLennan, Milam & Williamson.

Our Gazetteer shows that there are 114 communities within 40 miles [64.4 km]<1> of Maxdale. Of these communities, 71 are located in counties other than Bell County.

We usually exclude communities where we still need to verify their location,<3> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.

After starting with the home county for Maxdale (which is Bell County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Maxdale

For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.

  • Bell County   (where Maxdale resides)
    • County Website:   www.bellcountytx.com/
    • County Seat for Bell:   Belton
    • Genealogy Websites   ...
    • Nearest Communities to Maxdale   ...
      • These communities are listed by their distance from Maxdale.
      • Ding Dong
        (3 miles [4.8 km] to the east)
        • Note: We haven't been able to verify our GPS coordinates for Ding Dong. Although the coordinates have been estimated, they should be in the vicinity.<4>
        • Jump to our Gazetteer entry for Ding Dong
        • Ding Dong is located in Bell County
      • Mountain View Estates
        (4 miles [6.4 km] to the east)
        • Note: The GPS coordinates that we are using for Mountain View Estates have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Mountain View Estates
        • Mountain View Estates is located in Bell County
      • Youngsport
        (7 miles [11.3 km] to the east)
        • Note: The GPS coordinates that we are using for Youngsport have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Youngsport
        • Youngsport is located in Bell County
      • Killeen
        (9 miles [14.5 km] to the northeast)
        • Note: The GPS coordinates that we are using for Killeen have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Killeen
        • Killeen is located in Bell County
        • Population from the 2020 Census: 153,991 people
        • Jump to TripAdvisor's Tourism page for Killeen <6>
      • Copperas Cove
        (9 miles [14.5 km] to the northwest)
        • Note: The GPS coordinates that we are using for Copperas Cove have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Copperas Cove
        • Copperas Cove is located in Bell County
        • Population from the 2020 Census: 33,498 people
        • Jump to TripAdvisor's Tourism page for Copperas Cove <6>
      • Fort Hood
        (10 miles [16.1 km] to the north)
      • Chaffee Village
        (10 miles [16.1 km] to the northeast)
        • Note: The GPS coordinates that we are using for Chaffee Village have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Chaffee Village
        • Chaffee Village is located in Bell County
      • McNair Village
        (10 miles [16.1 km] to the northeast)
        • Note: The GPS coordinates that we are using for McNair Village have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for McNair Village
        • McNair Village is located in Bell County
      • Lone Star
        (11 miles [17.7 km] to the northeast)
        • Note: The GPS coordinates that we are using for Lone Star have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lone Star
        • Lone Star is located in Bell County
      • Cedar Valley
        (11 miles [17.7 km] to the southeast)
        • Note: The GPS coordinates that we are using for Cedar Valley have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Cedar Valley
        • Cedar Valley is located in Bell County
      • Harker Heights
        (12 miles [19.3 km] to the northeast)
        • Note: The GPS coordinates that we are using for Harker Heights have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Harker Heights
        • Harker Heights is located in Bell County
        • Population from the 2020 Census: 33,071 people
        • Jump to TripAdvisor's Tourism page for Harker Heights <6>
      • Walker Village
        (12 miles [19.3 km] to the northeast)
        • Note: The GPS coordinates that we are using for Walker Village have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Walker Village
        • Walker Village is located in Bell County
      • Continue List   (31 more) ...
        • Union Grove
          (13 miles [20.9 km] to the east)
          • Note: The GPS coordinates that we are using for Union Grove have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Union Grove
          • Union Grove is located in Bell County
        • Nolanville
          (14 miles [22.5 km] to the northeast)
        • Prairie Dell
          (16 miles [25.7 km] to the southeast)
          • Note: The GPS coordinates that we are using for Prairie Dell have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Prairie Dell
          • Prairie Dell is located in Bell County
        • Salado
          (18 miles [29 km] to the east)
        • Brookhaven
          (18 miles [29 km] to the northeast)
          • Note: We haven't been able to verify our GPS coordinates for Brookhaven. Although the coordinates have been estimated, they should be in the vicinity.<4>
          • Jump to our Gazetteer entry for Brookhaven
          • Brookhaven is located in Bell County
        • Curry Crossing
          (18 miles [29 km] to the northeast)
          • Note: The GPS coordinates that we are using for Curry Crossing have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Curry Crossing
          • Curry Crossing is located in Bell County
        • Dog Ridge ‑ Historic
          (19 miles [30.6 km] to the east)
          • Note: The GPS coordinates that we are using for Dog Ridge have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Dog Ridge
          • Dog Ridge is located in Bell County
        • Westcliff
          (20 miles [32.2 km] to the northeast)
          • Note: The GPS coordinates that we are using for Westcliff have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Westcliff
          • Westcliff is located in Bell County
        • Union Hill
          (21 miles [33.8 km] to the northeast)
          • Note: The GPS coordinates that we are using for Union Hill have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Union Hill
          • Union Hill is located in Bell County
        • Belton
          (22 miles [35.4 km] to the east)
        • Woodland
          (22 miles [35.4 km] to the northeast)
          • Note: The GPS coordinates that we are using for Woodland have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Woodland
          • Woodland is located in Bell County
        • Childers Mill ‑ Historic
          (23 miles [37 km] to the east)
          • Note: The GPS coordinates that we are using for Childers Mill have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Childers Mill
          • Childers Mill is located in Bell County
        • Hobbs
          (23 miles [37 km] to the east)
          • Note: The GPS coordinates that we are using for Hobbs have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Hobbs
          • Hobbs is located in Bell County
        • Sommers Mill
          (23 miles [37 km] to the east)
          • Note: The GPS coordinates that we are using for Sommers Mill have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Sommers Mill
          • Sommers Mill is located in Bell County
        • Jubilee Springs
          (23 miles [37 km] to the northeast)
          • Note: The GPS coordinates that we are using for Jubilee Springs have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Jubilee Springs
          • Jubilee Springs is located in Bell County
        • Bland
          (24 miles [38.6 km] to the northeast)
          • Note: The GPS coordinates that we are using for Bland have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Bland
          • Bland is located in Bell County
        • Morgan's Point Resort
          (24 miles [38.6 km] to the northeast)
          • Note: The GPS coordinates that we are using for Morgan's Point Resort have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Morgan's Point Resort
          • Morgan's Point Resort is located in Bell County
          • Population from the 2020 Census: 4,785 people
          • Jump to TripAdvisor's Tourism page for Morgan's Point Resort <6>
        • Midway
          (25 miles [40.2 km] to the east)
          • Note: The GPS coordinates that we are using for Midway have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Midway
          • Midway is located in Bell County
        • Owl Creek
          (25 miles [40.2 km] to the northeast)
          • Note: The GPS coordinates that we are using for Owl Creek have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Owl Creek
          • Owl Creek is located in Bell County
        • Holland
          (26 miles [41.8 km] to the east)
        • Moffat
          (26 miles [41.8 km] to the northeast)
          • Note: We haven't been able to verify our GPS coordinates for Moffat. Although the coordinates have been estimated, they should be in the vicinity.<4>
          • Jump to our Gazetteer entry for Moffat
          • Moffat is located in Bell County
        • Little River
          (27 miles [43.5 km] to the east)
        • Bartlett
          (27 miles [43.5 km] to the southeast)
          • Note: The GPS coordinates that we are using for Bartlett have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Bartlett
          • Bartlett is located in Bell County
          • Population from the 2020 Census: 1,766 people
          • Jump to TripAdvisor's Tourism page for Bartlett <6>
        • Gober
          (28 miles [45.1 km] to the east)
          • Note: The GPS coordinates that we are using for Gober have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Gober
          • Gober is located in Bell County
        • Little River-Academy
          (28 miles [45.1 km] to the east)
          • Jump to our Gazetteer entry for Little River-Academy
          • Little River-Academy is located in Bell County
          • Population from the 2020 Census: 2,048 people
        • Sparks
          (28 miles [45.1 km] to the east)
          • Jump to our Gazetteer entry for Sparks
          • Sparks is located in Bell County
        • White Hall
          (28 miles [45.1 km] to the northeast)
          • Note: The GPS coordinates that we are using for White Hall have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for White Hall
          • White Hall is located in Bell County
        • Academy
          (29 miles [46.7 km] to the east)
          • Jump to our Gazetteer entry for Academy
          • Academy is located in Bell County
        • Smith
          (29 miles [46.7 km] to the east)
          • Note: The GPS coordinates that we are using for Smith have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Smith
          • Smith is located in Bell County
        • Temple
          (29 miles [46.7 km] to the east)
        • Meador Grove
          (30 miles [48.3 km] to the northeast)
          • Note: The GPS coordinates that we are using for Meador Grove have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Meador Grove
          • Meador Grove is located in Bell County
  • Burnet County
    • County Seat for Burnet:   Burnet
    • Genealogy Websites   ...
    • Nearest Communities to Maxdale   ...
      • These communities are listed by their distance from Maxdale.
      • Oakalla
        (5 miles [8 km] to the west)
        • Note: The GPS coordinates that we are using for Oakalla have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Oakalla
        • Oakalla is located in Burnet County
      • Briggs
        (8 miles [12.9 km] to the southwest)
        • Note: The GPS coordinates that we are using for Briggs have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Briggs
        • Briggs is located in Burnet County
        • Jump to TripAdvisor's Tourism page for Briggs <6>
      • Watson
        (11 miles [17.7 km] to the west)
        • Note: The GPS coordinates that we are using for Watson have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Watson
        • Watson is located in Burnet County
      • Mahomet
        (12 miles [19.3 km] to the southwest)
        • Note: The GPS coordinates that we are using for Mahomet have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Mahomet
        • Mahomet is located in Burnet County
      • Joppa
        (16 miles [25.7 km] to the southwest)
        • Note: The GPS coordinates that we are using for Joppa have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Joppa
        • Joppa is located in Burnet County
      • Shady Grove
        (18 miles [29 km] to the southwest)
        • Note: The GPS coordinates that we are using for Shady Grove have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Shady Grove
        • Shady Grove is located in Burnet County
      • Sunnylane
        (18 miles [29 km] to the west)
        • Note: The GPS coordinates that we are using for Sunnylane have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Sunnylane
        • Sunnylane is located in Burnet County
      • Bertram
        (21 miles [33.8 km] to the southwest)
        • Note: The GPS coordinates that we are using for Bertram have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Bertram
        • Bertram is located in Burnet County
        • Population from the 2020 Census: 1,520 people
        • Jump to TripAdvisor's Tourism page for Bertram <6>
      • Lake Victor
        (21 miles [33.8 km] to the west)
        • Note: The GPS coordinates that we are using for Lake Victor have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lake Victor
        • Lake Victor is located in Burnet County
      • Oatmeal
        (25 miles [40.2 km] to the southwest)
      • Burnet
        (28 miles [45.1 km] to the southwest)
      • Naruna
        (28 miles [45.1 km] to the west)
        • Jump to our Gazetteer entry for Naruna
        • Naruna is located in Burnet County
      • Gandy
        (30 miles [48.3 km] to the southwest)
        • Note: The GPS coordinates that we are using for Gandy have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Gandy
        • Gandy is located in Burnet County
  • Coryell County
    • County Seat for Coryell:   Gatesville
    • Genealogy Websites   ...
    • Nearest Communities to Maxdale   ...
      • These communities are listed by their distance from Maxdale.
      • Kay Bee Heights
        (8 miles [12.9 km] to the north)
        • Note: The GPS coordinates that we are using for Kay Bee Heights have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Kay Bee Heights
        • Kay Bee Heights is located in Coryell County
      • Montague Village
        (8 miles [12.9 km] to the north)
        • Note: The GPS coordinates that we are using for Montague Village have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Montague Village
        • Montague Village is located in Coryell County
      • Comanche Village I
        (10 miles [16.1 km] to the north)
        • Note: The GPS coordinates that we are using for Comanche Village I have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Comanche Village I
        • Comanche Village I is located in Coryell County
      • Comanche Village II
        (10 miles [16.1 km] to the north)
        • Note: The GPS coordinates that we are using for Comanche Village II have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Comanche Village II
        • Comanche Village II is located in Coryell County
      • Comanche Village III
        (10 miles [16.1 km] to the north)
        • Note: The GPS coordinates that we are using for Comanche Village III have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Comanche Village III
        • Comanche Village III is located in Coryell County
      • House Crossing
        (13 miles [20.9 km] to the north)
        • Note: The GPS coordinates that we are using for House Crossing have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for House Crossing
        • House Crossing is located in Coryell County
      • Middle Crossing
        (15 miles [24.1 km] to the north)
        • Note: The GPS coordinates that we are using for Middle Crossing have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Middle Crossing
        • Middle Crossing is located in Coryell County
      • Saint Elijah Village
        (16 miles [25.7 km] to the north)
        • Note: The GPS coordinates that we are using for Saint Elijah Village have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Saint Elijah Village
        • Saint Elijah Village is located in Coryell County
      • Mason Crossing ‑ Historic
        (16 miles [25.7 km] to the northeast)
        • Note: We haven't been able to verify our GPS coordinates for Mason Crossing. Although the coordinates have been estimated, they should be in the vicinity.<4>
        • Jump to our Gazetteer entry for Mason Crossing
        • Mason Crossing is located in Coryell County
      • Antelope Crossing
        (17 miles [27.4 km] to the north)
        • Note: The GPS coordinates that we are using for Antelope Crossing have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Antelope Crossing
        • Antelope Crossing is located in Coryell County
      • Jackson Crossing
        (17 miles [27.4 km] to the north)
        • Note: The GPS coordinates that we are using for Jackson Crossing have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Jackson Crossing
        • Jackson Crossing is located in Coryell County
      • Topsey
        (18 miles [29 km] to the northwest)
        • Note: The GPS coordinates that we are using for Topsey have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Topsey
        • Topsey is located in Coryell County
      • Continue List   (10 more) ...
        • Riggs Ford
          (19 miles [30.6 km] to the northeast)
          • Note: The GPS coordinates that we are using for Riggs Ford have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Riggs Ford
          • Riggs Ford is located in Coryell County
        • Pidcoke
          (20 miles [32.2 km] to the north)
          • Note: The GPS coordinates that we are using for Pidcoke have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Pidcoke
          • Pidcoke is located in Coryell County
        • Cold Springs
          (21 miles [33.8 km] to the northeast)
          • Note: The GPS coordinates that we are using for Cold Springs have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Cold Springs
          • Cold Springs is located in Coryell County
        • Slater
          (25 miles [40.2 km] to the north)
          • Note: The GPS coordinates that we are using for Slater have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Slater
          • Slater is located in Coryell County
        • Flat
          (25 miles [40.2 km] to the northeast)
          • Note: The GPS coordinates that we are using for Flat have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Flat
          • Flat is located in Coryell County
          • Jump to TripAdvisor's Tourism page for Flat <6>
        • The Grove
          (26 miles [41.8 km] to the northeast)
          • Jump to our Gazetteer entry for The Grove
          • The Grove is located in Coryell County
        • King
          (27 miles [43.5 km] to the north)
          • Note: We haven't been able to verify our GPS coordinates for King. Although the coordinates have been estimated, they should be in the vicinity.<4>
          • Jump to our Gazetteer entry for King
          • King is located in Coryell County
        • Mound
          (27 miles [43.5 km] to the northeast)
          • Note: The GPS coordinates that we are using for Mound have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Mound
          • Mound is located in Coryell County
          • Jump to TripAdvisor's Tourism page for Mound <6>
        • Leon Junction
          (28 miles [45.1 km] to the northeast)
        • Fort Gates
          (29 miles [46.7 km] to the north)
          • Note: The GPS coordinates that we are using for Fort Gates have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Fort Gates
          • Fort Gates is located in Coryell County
  • Lampasas County
    • County Seat for Lampasas:   Lampasas
    • Genealogy Websites   ...
    • Nearest Communities to Maxdale   ...
      • These communities are listed by their distance from Maxdale.
      • Kempner
        (9 miles [14.5 km] to the northwest)
        • Note: The GPS coordinates that we are using for Kempner have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Kempner
        • Kempner is located in Lampasas County
        • Population from the 2020 Census: 1,160 people
        • Jump to TripAdvisor's Tourism page for Kempner <6>
      • Hallmark Crossing
        (14 miles [22.5 km] to the northwest)
        • Note: The GPS coordinates that we are using for Hallmark Crossing have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Hallmark Crossing
        • Hallmark Crossing is located in Lampasas County
      • Brooks Crossing
        (15 miles [24.1 km] to the northwest)
        • Note: The GPS coordinates that we are using for Brooks Crossing have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Brooks Crossing
        • Brooks Crossing is located in Lampasas County
      • Shortall
        (15 miles [24.1 km] to the west)
        • Note: The GPS coordinates that we are using for Shortall have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Shortall
        • Shortall is located in Lampasas County
      • Rumley
        (18 miles [29 km] to the northwest)
        • Note: The GPS coordinates that we are using for Rumley have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Rumley
        • Rumley is located in Lampasas County
      • Sparks Crossing ‑ Historic
        (18 miles [29 km] to the west)
        • Note: We haven't been able to verify our GPS coordinates for Sparks Crossing. Although the coordinates have been estimated, they should be in the vicinity.<4>
        • Jump to our Gazetteer entry for Sparks Crossing
        • Sparks Crossing is located in Lampasas County
      • Radio Junction
        (20 miles [32.2 km] to the west)
        • Note: The GPS coordinates that we are using for Radio Junction have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Radio Junction
        • Radio Junction is located in Lampasas County
      • Lampasas
        (21 miles [33.8 km] to the west)
      • Izoro
        (25 miles [40.2 km] to the northwest)
      • Adamsville
        (29 miles [46.7 km] to the northwest)
        • Note: The GPS coordinates that we are using for Adamsville have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Adamsville
        • Adamsville is located in Lampasas County
  • Travis County
  • Williamson County
    • County Website:   www.wilco.org/
    • County Seat for Williamson:   Georgetown
    • Genealogy Websites   ...
    • Nearest Communities to Maxdale   ...
      • These communities are listed by their distance from Maxdale.
      • Florence
        (10 miles [16.1 km] to the south)
        • Note: The GPS coordinates that we are using for Florence have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Florence
        • Florence is located in Williamson County
        • Population from the 2020 Census: 1,304 people
        • Jump to TripAdvisor's Tourism page for Florence <6>
      • Greens Crossing
        (11 miles [17.7 km] to the south)
        • Note: The GPS coordinates that we are using for Greens Crossing have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Greens Crossing
        • Greens Crossing is located in Williamson County
      • Andice
        (14 miles [22.5 km] to the south)
      • Corn Hill
        (18 miles [29 km] to the southeast)
        • Note: The GPS coordinates that we are using for Corn Hill have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Corn Hill
        • Corn Hill is located in Williamson County
      • Jarrell
        (18 miles [29 km] to the southeast)
        • Note: The GPS coordinates that we are using for Jarrell have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Jarrell
        • Jarrell is located in Williamson County
        • Population from the 2020 Census: 2,077 people
        • Jump to TripAdvisor's Tourism page for Jarrell <6>
      • Hunt Crossing
        (20 miles [32.2 km] to the south)
        • Note: The GPS coordinates that we are using for Hunt Crossing have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Hunt Crossing
        • Hunt Crossing is located in Williamson County
      • Sun City
        (20 miles [32.2 km] to the south)
        • Note: The GPS coordinates that we are using for Sun City have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Sun City
        • Sun City is located in Williamson County
      • Berrys Creek
        (21 miles [33.8 km] to the southeast)
        • Note: The GPS coordinates that we are using for Berrys Creek have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Berrys Creek
        • Berrys Creek is located in Williamson County
      • New Corn Hill
        (21 miles [33.8 km] to the southeast)
        • Note: The GPS coordinates that we are using for New Corn Hill have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for New Corn Hill
        • New Corn Hill is located in Williamson County
      • Serenada
        (21 miles [33.8 km] to the southeast)
        • Jump to our Gazetteer entry for Serenada
        • Serenada is located in Williamson County
      • Theon
        (21 miles [33.8 km] to the southeast)
        • Note: The GPS coordinates that we are using for Theon have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Theon
        • Theon is located in Williamson County
      • Liberty Hill
        (22 miles [35.4 km] to the south)
        • Note: The GPS coordinates that we are using for Liberty Hill have been provided by the GNIS.<5> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Liberty Hill
        • Liberty Hill is located in Williamson County
        • Population from the 2020 Census: 3,549 people
        • Jump to TripAdvisor's Tourism page for Liberty Hill <6>
      • Continue List   (13 more) ...
        • Russell Crossing
          (22 miles [35.4 km] to the south)
          • Note: The GPS coordinates that we are using for Russell Crossing have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Russell Crossing
          • Russell Crossing is located in Williamson County
        • Schwertner
          (22 miles [35.4 km] to the southeast)
          • Note: The GPS coordinates that we are using for Schwertner have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Schwertner
          • Schwertner is located in Williamson County
          • Jump to TripAdvisor's Tourism page for Schwertner <6>
        • Seward Junction
          (23 miles [37 km] to the south)
          • Note: The GPS coordinates that we are using for Seward Junction have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Seward Junction
          • Seward Junction is located in Williamson County
        • Walburg
          (23 miles [37 km] to the southeast)
          • Note: The GPS coordinates that we are using for Walburg have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Walburg
          • Walburg is located in Williamson County
          • Jump to TripAdvisor's Tourism page for Walburg <6>
        • Jinks Branch
          (24 miles [38.6 km] to the south)
          • Note: The GPS coordinates that we are using for Jinks Branch have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Jinks Branch
          • Jinks Branch is located in Williamson County
        • Georgetown
          (25 miles [40.2 km] to the south)
        • North Georgetown
          (25 miles [40.2 km] to the south)
          • Note: The GPS coordinates that we are using for North Georgetown have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Georgetown
          • North Georgetown is located in Williamson County
        • Keelersville
          (25 miles [40.2 km] to the southeast)
          • Note: The GPS coordinates that we are using for Keelersville have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Keelersville
          • Keelersville is located in Williamson County
        • Weir
          (26 miles [41.8 km] to the southeast)
          • Note: The GPS coordinates that we are using for Weir have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Weir
          • Weir is located in Williamson County
          • Population from the 2020 Census: 549 people
          • Jump to TripAdvisor's Tourism page for Weir <6>
        • Mozo
          (27 miles [43.5 km] to the southeast)
          • Note: The GPS coordinates that we are using for Mozo have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Mozo
          • Mozo is located in Williamson County
        • Leander
          (29 miles [46.7 km] to the south)
          • Note: The GPS coordinates that we are using for Leander have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Leander
          • Leander is located in Williamson County
          • Population from the 2020 Census: 70,519 people
          • Jump to TripAdvisor's Tourism page for Leander <6>
        • Granger
          (29 miles [46.7 km] to the southeast)
        • Jonah
          (29 miles [46.7 km] to the southeast)
          • Note: The GPS coordinates that we are using for Jonah have been provided by the GNIS.<5> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Jonah
          • Jonah is located in Williamson County

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Maxdale) to Point B.Our distance measurements begin at a specific point in Maxdale. The point we use is located at these GPS coordinates - Latitude: 30.9899, Longitude: -97.8356       In this case, the coordinates for Maxdale have been provided by the Geographic Names Information System (GNIS).
<2>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Maxdale, please let us know so that we can improve our accuracy.
<3>Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.

We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.

Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know.
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<5>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<6>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 22 Mar 2025