RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Lampasas County >> Kempner >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Texas

The Commemorative Quarter for Texas





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Kempner. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Kempner.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Kempner - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 25 communities listed:

  • Andice
    (21 miles [33.8 km] to the south)
  • Belton
    (30 miles [48.3 km] to the east)
  • Bertram
    (23 miles [37 km] to the south)
    • Note: The GPS coordinates that we are using for Bertram have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bertram
    • Bertram is located in Burnet County
    • Population from the 2020 Census: 1,520 people
    • Jump to TripAdvisor's Tourism page for Bertram <2>
  • Briggs
    (13 miles [20.9 km] to the south)
    • Note: The GPS coordinates that we are using for Briggs have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Briggs
    • Briggs is located in Burnet County
    • Jump to TripAdvisor's Tourism page for Briggs <2>
  • Burnet
    (26 miles [41.8 km] to the southwest)
  • Copperas Cove
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Copperas Cove have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Copperas Cove
    • Copperas Cove is located in Bell County
    • Population from the 2020 Census: 33,498 people
    • Jump to TripAdvisor's Tourism page for Copperas Cove <2>
  • Evant
    (29 miles [46.7 km] to the north)
    • Note: The GPS coordinates that we are using for Evant have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Evant
    • Evant is located in Coryell County
    • Population from the 2020 Census: 412 people
    • Jump to TripAdvisor's Tourism page for Evant <2>
  • Flat
    (25 miles [40.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Flat have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Flat
    • Flat is located in Coryell County
    • Jump to TripAdvisor's Tourism page for Flat <2>
  • Florence
    (19 miles [30.6 km] to the southeast)
    • Note: The GPS coordinates that we are using for Florence have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Florence
    • Florence is located in Williamson County
    • Population from the 2020 Census: 1,304 people
    • Jump to TripAdvisor's Tourism page for Florence <2>
  • Fort Hood
    (12 miles [19.3 km] to the east)
  • Gatesville
    (28 miles [45.1 km] to the northeast)
  • Harker Heights
    (19 miles [30.6 km] to the east)
    • Note: The GPS coordinates that we are using for Harker Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Harker Heights
    • Harker Heights is located in Bell County
    • Population from the 2020 Census: 33,071 people
    • Jump to TripAdvisor's Tourism page for Harker Heights <2>
  • Izoro
    (16 miles [25.7 km] to the northwest)
  • Jarrell
    (27 miles [43.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Jarrell have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jarrell
    • Jarrell is located in Williamson County
    • Population from the 2020 Census: 2,077 people
    • Jump to TripAdvisor's Tourism page for Jarrell <2>
  • Killeen
    (14 miles [22.5 km] to the east)
    • Note: The GPS coordinates that we are using for Killeen have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Killeen
    • Killeen is located in Bell County
    • Population from the 2020 Census: 153,991 people
    • Jump to TripAdvisor's Tourism page for Killeen <2>
  • Lampasas
    (12 miles [19.3 km] to the west)
  • Leon Junction
    (28 miles [45.1 km] to the northeast)
  • Liberty Hill
    (28 miles [45.1 km] to the south)
    • Note: The GPS coordinates that we are using for Liberty Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Liberty Hill
    • Liberty Hill is located in Williamson County
    • Population from the 2020 Census: 3,549 people
    • Jump to TripAdvisor's Tourism page for Liberty Hill <2>
  • Lometa
    (26 miles [41.8 km] to the west)
  • Morgan's Point Resort
    (30 miles [48.3 km] to the east)
    • Note: The GPS coordinates that we are using for Morgan's Point Resort have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Morgan's Point Resort
    • Morgan's Point Resort is located in Bell County
    • Population from the 2020 Census: 4,785 people
    • Jump to TripAdvisor's Tourism page for Morgan's Point Resort <2>
  • Mound
    (27 miles [43.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Mound have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mound
    • Mound is located in Coryell County
    • Jump to TripAdvisor's Tourism page for Mound <2>
  • Nolanville
    (21 miles [33.8 km] to the east)
  • Oatmeal
    (27 miles [43.5 km] to the south)
  • Purmela
    (28 miles [45.1 km] to the north)
    • Note: The GPS coordinates that we are using for Purmela have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Purmela
    • Purmela is located in Coryell County
    • Jump to TripAdvisor's Tourism page for Purmela <2>
  • Salado
    (27 miles [43.5 km] to the east)

Unfortunately, we don't know of an official website for Kempner. If you can help, please contact us through our Feedback Page.

The official website for State of Texas: https://texas.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Kempner) to Point B.Our distance measurements begin at a specific point in Kempner. The point we use is located at these GPS coordinates - Latitude: 31.0749, Longitude: -97.9710       In this case, the coordinates for Kempner have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024