Census Data for Keelersville

As far as we can tell, Keelersville has not been included in past Census counts, so there is no population information for this community.

While we don't have census information for Keelersville, you might be interested in some nearby communities where we do:

• Granger
  (4 miles [6.4 km] to the east)
  • Jump to our Gazetteer entry for Granger
  • Granger is located in Williamson County
  • Jump to TripAdvisor's Tourism page for Granger <1>
• Bartlett
  (6 miles [9.7 km] to the northeast)
  • Note: The GPS coordinates that we are using for Bartlett have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for Bartlett
  • Bartlett is located in Bell County
  • Jump to TripAdvisor's Tourism page for Bartlett <1>
• Weir
  (6 miles [9.7 km] to the southwest)
  • Note: The GPS coordinates that we are using for Weir have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for Weir
  • Weir is located in Williamson County
  • Jump to TripAdvisor's Tourism page for Weir <1>
• Jarrell
  (7 miles [11.3 km] to the northwest)
  • Note: The GPS coordinates that we are using for Jarrell have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for Jarrell
  • Jarrell is located in Williamson County
  • Jump to TripAdvisor's Tourism page for Jarrell <1>
• Georgetown
  (11 miles [17.7 km] to the southwest)
  • Jump to our Gazetteer entry for Georgetown
  • Georgetown is located in Williamson County
  • Jump to TripAdvisor's Tourism page for Georgetown <1>
• Holland
  (11 miles [17.7 km] to the northeast)
  • Jump to our Gazetteer entry for Holland
  • Holland is located in Bell County
  • Jump to TripAdvisor's Tourism page for Holland <1>
• Hutto
  (13 miles [20.9 km] to the south)
  • Note: The GPS coordinates that we are using for Hutto have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for Hutto
  • Hutto is located in Williamson County
  • Jump to TripAdvisor's Tourism page for Hutto <1>
• Taylor
  (13 miles [20.9 km] to the southeast)
  • Jump to our Gazetteer entry for Taylor
  • Taylor is located in Williamson County
  • Jump to TripAdvisor's Tourism page for Taylor <1>
• Salado
  (14 miles [22.5 km] to the north)
  • Jump to our Gazetteer entry for Salado
  • Salado is located in Bell County
  • The population in 2015 was estimated at 2,140 people. This represents a 0.66% increase since 2010.The 2010 Census gave a population of 2,126 people.
  • Jump to TripAdvisor's Tourism page for Salado <1>
• Thrall
  (16 miles [25.7 km] to the southeast)
  • Note: The GPS coordinates that we are using for Thrall have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for Thrall
  • Thrall is located in Williamson County
  • Jump to TripAdvisor's Tourism page for Thrall <1>
• Florence
  (17 miles [27.4 km] to the northwest)
  • Note: The GPS coordinates that we are using for Florence have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for Florence
  • Florence is located in Williamson County
  • Jump to TripAdvisor's Tourism page for Florence <1>
• Round Rock
  (17 miles [27.4 km] to the southwest)
  • Jump to our Gazetteer entry for Round Rock
  • Round Rock is located in Williamson County
  • Jump to TripAdvisor's Tourism page for Round Rock <1>
• Continue List   (164 more) ...
  • Little River-Academy
    (19 miles [30.6 km] to the northeast)
    • Jump to our Gazetteer entry for Little River-Academy
    • Little River-Academy is located in Bell County
  • Pflugerville
    (20 miles [32.2 km] to the south)
    • Note: The GPS coordinates that we are using for Pflugerville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pflugerville
    • Pflugerville is located in Travis County
    • Jump to TripAdvisor's Tourism page for Pflugerville <1>
  • Thorndale
    (20 miles [32.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Thorndale have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Thorndale
    • Thorndale is located in Milam County
    • Jump to TripAdvisor's Tourism page for Thorndale <1>

Williamson County ...

Keelersville is located in Williamson County<3>.

For more information, please visit our Census Page for Williamson County.

Miscellaneous Information for Keelersville ...

The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Williamson County or the community of Keelersville:

• The GNIS Codes ...
  • The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Keelersville:
  • GNIS ID for Keelersville: 1360509
  • GNIS ID for Williamson County: 1384031
  • GNIS ID for State of Texas: 1779801

• Misc. Census Codes ...
  • Keelersville is located in Census Region #3 (the South Region) and Division #7 (the West South-Central Division).

For more information about the various Federal identification codes, please visit our Misc Page for Keelersville.

Off-the-Road Links ...

Unfortunately, we don't know of a website for Keelersville. If you can help, please contact us through our Feedback Page.

The official website for Williamson County: www.wilco.org/

The official website for State of Texas: https://texas.gov/

The official website of the U.S. Board on Geographic Names (BGN)

The official website of the U.S. Geological Survey (USGS)