|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Joinerville in the Atlas, the following communities of the 1890's would have been found near the current location of Joinerville. The following communities are listed based on their distance, with the one closest to Joinerville listed first.
- Henderson
(6 miles [9.7 km] to the east)
- Overton
(7 miles [11.3 km] to the northwest)
- Pirtle
(9 miles [14.5 km] to the north)
- Troup
(12 miles [19.3 km] to the west)
- Omen
(12 miles [19.3 km] to the west)
- Griffin
(13 miles [20.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Griffin. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Griffin
- Griffin is located in Cherokee County
- Google driving directions:
- From your current location to Griffin
- From Joinerville to Griffin
- Monroe
(14 miles [22.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Monroe. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Monroe
- Monroe is located in Rusk County
- Google driving directions:
- From your current location to Monroe
- From Joinerville to Monroe
- Kilgore
(14 miles [22.5 km] to the north)
- Laneville
(15 miles [24.1 km] to the south)
- New Salem
(16 miles [25.7 km] to the south)
- Minden
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Minden have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Minden
- Minden is located in Rusk County
- Jump to TripAdvisor's Tourism page for Minden <2>
- Lone Star
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Lone Star have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lone Star
- Lone Star is located in Cherokee County
- Elderville
(17 miles [27.4 km] to the northeast)
- Browning
(17 miles [27.4 km] to the northwest)
- Mixon
(18 miles [29 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Mixon. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Mixon
- Mixon is located in Cherokee County
- Google driving directions:
- From your current location to Mixon
- From Joinerville to Mixon
- Glenfawn
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Glenfawn have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glenfawn
- Glenfawn is located in Rusk County
- Pinehill
(18 miles [29 km] to the east)
- Long Branch
(20 miles [32.2 km] to the east)
- Fair Play
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Fair Play have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fair Play
- Fair Play is located in Panola County
- Mount Enterprise
(22 miles [35.4 km] to the southeast)
- Mount Selman
(23 miles [37 km] to the west)
- Easton
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Easton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Easton
- Easton is located in Gregg County
- Population from the 2020 Census: 525 people
- Jump to TripAdvisor's Tourism page for Easton <2>
- Starrville
(23 miles [37 km] to the northwest)
- Lawsonville
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Lawsonville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lawsonville
- Lawsonville is located in Rusk County
- Tatum
(24 miles [38.6 km] to the northeast)
- Longview
(24 miles [38.6 km] to the northeast)
- Gladewater
(24 miles [38.6 km] to the north)
- Bullard
(24 miles [38.6 km] to the west)
- Note: The GPS coordinates that we are using for Bullard have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bullard
- Bullard is located in Cherokee County
- Population from the 2020 Census: 3,891 people
- Jump to TripAdvisor's Tourism page for Bullard <2>
Off-the-Road Links ...
The official website for State of Texas: https://texas.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Joinerville, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|