RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Austin County >> Industry >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Texas

The Commemorative Quarter for Texas





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Industry (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Industry. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most hospitals and doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Industry is located in Austin County.

To see how the shape of Texas' counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Austin County: Colorado, Fayette, Fort Bend, Waller, Washington & Wharton.

Below are the counties that are near Industry. For each of these counties, we show a sample of those communities that are closest to Industry:

  • Austin County     (The home county of Industry)
    • The following are listed by their distance from Industry, with the one closest to Industry listed first.
    • Bleiblerville
      (3 miles [4.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Bleiblerville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bleiblerville
      • Bleiblerville is located in Austin County
      • Jump to TripAdvisor's Tourism page for Bleiblerville <2>
    • New Ulm
      (5 miles [8 km] to the south)
    • Shelby
      (6 miles [9.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Shelby have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shelby
      • Shelby is located in Austin County
    • Kenney
      (11 miles [17.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Kenney have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kenney
      • Kenney is located in Austin County
      • Jump to TripAdvisor's Tourism page for Kenney <2>
    • New Wehdem
      (11 miles [17.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for New Wehdem have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Wehdem
      • New Wehdem is located in Austin County
    • Cat Spring
      (13 miles [20.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Cat Spring have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cat Spring
      • Cat Spring is located in Austin County
      • Jump to TripAdvisor's Tourism page for Cat Spring <2>
    • Bellville
      (14 miles [22.5 km] to the east)
    • Sempronius ‑ Historic
      (14 miles [22.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Sempronius have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sempronius
      • Sempronius is located in Austin County
    • Millheim
      (16 miles [25.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Millheim have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Millheim
      • Millheim is located in Austin County
    • Buckhorn
      (18 miles [29 km] to the east)
      • Jump to our Gazetteer entry for Buckhorn
      • Buckhorn is located in Austin County
    • Rexville ‑ Historic
      (24 miles [38.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Rexville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rexville
      • Rexville is located in Austin County
    • Sealy
      (24 miles [38.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Sealy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sealy
      • Sealy is located in Austin County
      • Population from the 2020 Census: 6,443 people
      • Jump to TripAdvisor's Tourism page for Sealy <2>
  • Burleson County
    • The following are listed by their distance from Industry, with the one closest to Industry listed first.
    • Somerville
      (25 miles [40.2 km] to the north)
    • Scofield ‑ Historic
      (26 miles [41.8 km] to the north)
      • Note: The GPS coordinates that we are using for Scofield have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Scofield
      • Scofield is located in Burleson County
    • Lyons
      (28 miles [45.1 km] to the north)
    • Clay
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Clay have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Clay
      • Clay is located in Burleson County
      • Jump to TripAdvisor's Tourism page for Clay <2>
    • Frenstat
      (30 miles [48.3 km] to the north)
      • Jump to our Gazetteer entry for Frenstat
      • Frenstat is located in Burleson County
  • Colorado County
    • The following are listed by their distance from Industry, with the one closest to Industry listed first.
    • Pisek ‑ Historic
      (6 miles [9.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Pisek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pisek
      • Pisek is located in Colorado County
    • Frelsburg
      (7 miles [11.3 km] to the south)
      • Jump to our Gazetteer entry for Frelsburg
      • Frelsburg is located in Colorado County
    • Hillcrest
      (16 miles [25.7 km] to the south)
      • Jump to our Gazetteer entry for Hillcrest
      • Hillcrest is located in Colorado County
    • Alleyton
      (18 miles [29 km] to the south)
    • Columbus
      (18 miles [29 km] to the south)
    • Glidden
      (19 miles [30.6 km] to the south)
      • Note: The GPS coordinates that we are using for Glidden have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Glidden
      • Glidden is located in Colorado County
      • Jump to TripAdvisor's Tourism page for Glidden <2>
    • Ramsey
      (22 miles [35.4 km] to the south)
      • Note: The GPS coordinates that we are using for Ramsey have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ramsey
      • Ramsey is located in Colorado County
    • Borden
      (22 miles [35.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Borden have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Borden
      • Borden is located in Colorado County
    • Weimar
      (25 miles [40.2 km] to the southwest)
    • Altair
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Altair have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Altair
      • Altair is located in Colorado County
      • Jump to TripAdvisor's Tourism page for Altair <2>
    • Eagle Lake
      (28 miles [45.1 km] to the south)
    • New Bielau ‑ Historic
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for New Bielau have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Bielau
      • New Bielau is located in Colorado County
  • Fayette County
    • The following are listed by their distance from Industry, with the one closest to Industry listed first.
    • Fayetteville
      (11 miles [17.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Fayetteville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fayetteville
      • Fayetteville is located in Fayette County
      • Population from the 2020 Census: 257 people
      • Jump to TripAdvisor's Tourism page for Fayetteville <2>
    • Roznov
      (12 miles [19.3 km] to the west)
      • Jump to our Gazetteer entry for Roznov
      • Roznov is located in Fayette County
    • Round Top
      (13 miles [20.9 km] to the northwest)
    • Warrenton
      (14 miles [22.5 km] to the west)
    • Ellinger
      (15 miles [24.1 km] to the southwest)
    • Carmine
      (16 miles [25.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Carmine have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Carmine
      • Carmine is located in Fayette County
      • Population from the 2020 Census: 254 people
      • Jump to TripAdvisor's Tourism page for Carmine <2>
    • Walhalla
      (16 miles [25.7 km] to the west)
      • Jump to our Gazetteer entry for Walhalla
      • Walhalla is located in Fayette County
    • Halsted
      (17 miles [27.4 km] to the west)
      • Jump to our Gazetteer entry for Halsted
      • Halsted is located in Fayette County
    • Joiner
      (18 miles [29 km] to the west)
      • Note: The GPS coordinates that we are using for Joiner have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Joiner
      • Joiner is located in Fayette County
    • Rutersville
      (18 miles [29 km] to the west)
      • Jump to our Gazetteer entry for Rutersville
      • Rutersville is located in Fayette County
    • Nechanitz
      (20 miles [32.2 km] to the west)
      • Jump to our Gazetteer entry for Nechanitz
      • Nechanitz is located in Fayette County
    • Ledbetter
      (21 miles [33.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Ledbetter have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ledbetter
      • Ledbetter is located in Fayette County
      • Jump to TripAdvisor's Tourism page for Ledbetter <2>
  • Lee County
    • Giddings
      (29 miles [46.7 km] to the northwest)
  • Waller County
    • The following are listed by their distance from Industry, with the one closest to Industry listed first.
    • Saint Paul
      (24 miles [38.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Saint Paul have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saint Paul
      • Saint Paul is located in Waller County
    • Hempstead
      (26 miles [41.8 km] to the east)
    • Pine Island
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for Pine Island have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pine Island
      • Pine Island is located in Waller County
      • Population from the 2020 Census: 1,205 people
  • Washington County
    • The following are listed by their distance from Industry, with the one closest to Industry listed first.
    • Wesley
      (6 miles [9.7 km] to the north)
      • Jump to our Gazetteer entry for Wesley
      • Wesley is located in Washington County
    • Brenham
      (14 miles [22.5 km] to the northeast)
      • Jump to our Gazetteer entry for Brenham
      • Brenham is located in Washington County
      • Population from the 2020 Census: 17,736 people
      • Jump to TripAdvisor's Tourism page for Brenham <2>
    • La Bahia
      (14 miles [22.5 km] to the northwest)
      • Jump to our Gazetteer entry for La Bahia
      • La Bahia is located in Washington County
    • Burton
      (15 miles [24.1 km] to the north)
    • Chappell Hill
      (18 miles [29 km] to the northeast)
      • Note: The GPS coordinates that we are using for Chappell Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chappell Hill
      • Chappell Hill is located in Washington County
      • Jump to TripAdvisor's Tourism page for Chappell Hill <2>
    • Rehburg
      (19 miles [30.6 km] to the north)
      • Jump to our Gazetteer entry for Rehburg
      • Rehburg is located in Washington County
    • Gay Hill
      (20 miles [32.2 km] to the north)
      • Jump to our Gazetteer entry for Gay Hill
      • Gay Hill is located in Washington County
    • Quarry
      (23 miles [37 km] to the north)
      • Jump to our Gazetteer entry for Quarry
      • Quarry is located in Washington County
    • Whitman
      (24 miles [38.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Whitman have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Whitman
      • Whitman is located in Washington County
    • Independence
      (25 miles [40.2 km] to the north)
    • Graball ‑ Historic
      (29 miles [46.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Graball have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Graball
      • Graball is located in Washington County

For an expanded list of the communities that are closest to Industry, see our County-by-County Page for Industry.

Newspapers Published in Industry ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 94 newspapers that have been published in the area around Industry.

Although we're unaware of any newspapers that were published in the immediate area of Industry, there are papers which were published within 29 miles [46.7 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Industry.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first visit the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Industry:

Cemeteries Near Industry ...

Below are cemeteries that are in the vicinity of Industry.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Industry covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Industry, with the one closest to Industry listed first.

  • Knolle Cemetery
    (Less than 2 miles to the west)
    • Note: The GPS coordinates that we are using for the Knolle Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Knolle Cemetery
  • Star Hill Cemetery
    (3 miles [4.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Star Hill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Star Hill Cemetery
  • Shellburne Cemetery
    (3 miles [4.8 km] to the east)
    • Note: The GPS coordinates that we are using for the Shellburne Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Shellburne Cemetery
  • McElroy Cemetery
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for the McElroy Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the McElroy Cemetery
  • Frnka Cemetery
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for the Frnka Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Frnka Cemetery
  • New Ulm Cemetery
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for the New Ulm Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the New Ulm Cemetery
  • Bethany Cemetery
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for the Bethany Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Bethany Cemetery
  • Zettel Cemetery
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for the Zettel Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Zettel Cemetery
  • National Cemetery
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for the National Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the National Cemetery
  • Schmidt Cemetery
    (4 miles [6.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Schmidt Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Schmidt Cemetery
  • Pope Cemetery
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for the Pope Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Pope Cemetery
  • Nelsonville Cemetery
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for the Nelsonville Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Nelsonville Cemetery
  • Continue List   (243 more) ...
    • Haedge Cemetery
      (5 miles [8 km] to the east)
      • Note: The GPS coordinates that we are using for the Haedge Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Haedge Cemetery
    • Floyd Cemetery
      (6 miles [9.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for the Floyd Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Floyd Cemetery
    • Heitman Cemetery
      (6 miles [9.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for the Heitman Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Heitman Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

The Rand McNally Atlas shows that Industry had a population of 485 people in 1895 with a post office and no railroad service. In 2020, Industry had a population of 326 people.

These communities are listed based on their distance from Industry, with the one closest to Industry listed first.

  • Welcome
    (3 miles [4.8 km] to the north)
    • Note: The GPS coordinates that we are using for Welcome have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Welcome
    • Welcome is located in Austin County
  • New Ulm
    (5 miles [8 km] to the south)
  • Nelsonville
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for Nelsonville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Nelsonville
    • Nelsonville is located in Austin County
  • Wesley
    (6 miles [9.7 km] to the north)
    • Jump to our Gazetteer entry for Wesley
    • Wesley is located in Washington County
  • Shelby
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Shelby have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Shelby
    • Shelby is located in Austin County
  • Frelsburg
    (7 miles [11.3 km] to the south)
    • Jump to our Gazetteer entry for Frelsburg
    • Frelsburg is located in Colorado County
  • Latium
    (8 miles [12.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Latium have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Latium
    • Latium is located in Washington County
  • Haw Creek ‑ Historic
    (8 miles [12.9 km] to the west)
    • Note: The GPS coordinates that we are using for Haw Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Haw Creek
    • Haw Creek is located in Fayette County
  • Greenvine
    (10 miles [16.1 km] to the north)
    • Note: The GPS coordinates that we are using for Greenvine have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Greenvine
    • Greenvine is located in Washington County
  • Fayetteville
    (11 miles [17.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Fayetteville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fayetteville
    • Fayetteville is located in Fayette County
    • Population from the 2020 Census: 257 people
    • Jump to TripAdvisor's Tourism page for Fayetteville <2>
  • Kenney
    (11 miles [17.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Kenney have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kenney
    • Kenney is located in Austin County
    • Jump to TripAdvisor's Tourism page for Kenney <2>
  • Phillipsburg
    (11 miles [17.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Phillipsburg have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Phillipsburg
    • Phillipsburg is located in Washington County
  • Continue List   (14 more) ...
    • Mill Creek
      (12 miles [19.3 km] to the north)
      • Note: The GPS coordinates that we are using for Mill Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mill Creek
      • Mill Creek is located in Washington County
    • Cat Spring
      (13 miles [20.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Cat Spring have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cat Spring
      • Cat Spring is located in Austin County
      • Jump to TripAdvisor's Tourism page for Cat Spring <2>
    • Round Top
      (13 miles [20.9 km] to the northwest)

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Industry. See our List of 1890's Communities around Industry.

Unfortunately, we don't know of a website for Industry. If you can help, please contact us through our Feedback Page.

The official website for Austin County: www.austincounty.com/

The official website for State of Texas: https://texas.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Industry) to Point B.Our distance measurements begin at a specific point in Industry. The point we use is located at these GPS coordinates - Latitude: 29.9715, Longitude: -96.4991       In this case, the coordinates for Industry have been provided by the Geographic Names Information System (GNIS).
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Industry, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024