RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Williamson County >> Florence >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
Texas

The Commemorative Quarter for Texas





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

The Rand McNally Atlas shows that Florence had a population of 263 people in 1895 with a post office and no railroad service. In 2020, Florence had a population of 1,304 people.

The following communities are listed based on their distance from Florence, with the one closest to Florence listed first.

  • Mahomet
    (8 miles [12.9 km] to the west)
    • Note: The GPS coordinates that we are using for Mahomet have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mahomet
    • Mahomet is located in Burnet County
  • Youngsport
    (9 miles [14.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Youngsport have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Youngsport
    • Youngsport is located in Bell County
  • Maxdale ‑ Historic
    (10 miles [16.1 km] to the north)
    • Note: The GPS coordinates that we are using for Maxdale have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Maxdale
    • Maxdale is located in Bell County
  • Corn Hill
    (10 miles [16.1 km] to the east)
    • Note: The GPS coordinates that we are using for Corn Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Corn Hill
    • Corn Hill is located in Williamson County
  • Theon
    (12 miles [19.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Theon have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Theon
    • Theon is located in Williamson County
  • Oakalla
    (12 miles [19.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Oakalla have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oakalla
    • Oakalla is located in Burnet County
  • Liberty Hill
    (14 miles [22.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Liberty Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Liberty Hill
    • Liberty Hill is located in Williamson County
    • Population from the 2020 Census: 3,549 people
    • Jump to TripAdvisor's Tourism page for Liberty Hill <3>
  • Walburg
    (14 miles [22.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Walburg have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Walburg
    • Walburg is located in Williamson County
    • Jump to TripAdvisor's Tourism page for Walburg <3>
  • Georgetown
    (15 miles [24.1 km] to the southeast)
  • Bertram
    (17 miles [27.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Bertram have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bertram
    • Bertram is located in Burnet County
    • Population from the 2020 Census: 1,520 people
    • Jump to TripAdvisor's Tourism page for Bertram <3>
  • Salado
    (17 miles [27.4 km] to the northeast)
  • Killeen
    (17 miles [27.4 km] to the north)
    • Note: The GPS coordinates that we are using for Killeen have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Killeen
    • Killeen is located in Bell County
    • Population from the 2020 Census: 153,991 people
    • Jump to TripAdvisor's Tourism page for Killeen <3>
  • Leander
    (19 miles [30.6 km] to the south)
    • Note: The GPS coordinates that we are using for Leander have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Leander
    • Leander is located in Williamson County
    • Population from the 2020 Census: 70,519 people
    • Jump to TripAdvisor's Tourism page for Leander <3>
  • Nolanville
    (19 miles [30.6 km] to the northeast)
  • Kempner
    (19 miles [30.6 km] to the northwest)
    • Note: The GPS coordinates that we are using for Kempner have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kempner
    • Kempner is located in Lampasas County
    • Population from the 2020 Census: 1,160 people
    • Jump to TripAdvisor's Tourism page for Kempner <3>
  • Jonah
    (20 miles [32.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Jonah have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jonah
    • Jonah is located in Williamson County
  • Bartlett
    (21 miles [33.8 km] to the east)
    • Note: The GPS coordinates that we are using for Bartlett have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bartlett
    • Bartlett is located in Bell County
    • Population from the 2020 Census: 1,766 people
    • Jump to TripAdvisor's Tourism page for Bartlett <3>
  • Sunnylane
    (21 miles [33.8 km] to the west)
    • Note: The GPS coordinates that we are using for Sunnylane have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sunnylane
    • Sunnylane is located in Burnet County
  • Granger
    (22 miles [35.4 km] to the east)
  • Cedar Park
    (23 miles [37 km] to the south)
    • Note: We haven't been able to verify our GPS coordinates for Cedar Park. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Cedar Park
    • Cedar Park is located in Williamson County
    • Population from the 2020 Census: 81,040 people
    • Jump to TripAdvisor's Tourism page for Cedar Park <3>
  • Old Round Rock ‑ Historic
    (23 miles [37 km] to the south)
    • Note: The GPS coordinates that we are using for Old Round Rock have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Old Round Rock
    • Old Round Rock is located in Williamson County
  • Round Rock
    (23 miles [37 km] to the south)
  • Holland
    (23 miles [37 km] to the east)
  • Belton
    (24 miles [38.6 km] to the northeast)
  • Hutto
    (25 miles [40.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Hutto have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hutto
    • Hutto is located in Williamson County
    • Population from the 2020 Census: 29,987 people
    • Jump to TripAdvisor's Tourism page for Hutto <3>
  • Circleville
    (25 miles [40.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Circleville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Circleville
    • Circleville is located in Williamson County
  • Brookhaven
    (25 miles [40.2 km] to the north)
    • Note: We haven't been able to verify our GPS coordinates for Brookhaven. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Brookhaven
    • Brookhaven is located in Bell County

Unfortunately, we don't know of an official website for Florence. If you can help, please contact us through our Feedback Page.

The official website for Williamson County: www.wilco.org/

The official website for State of Texas: https://texas.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Florence, please let us know so that we can improve our accuracy.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 25 Mar 2025