|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Murphy Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Murphy Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Murphy Cemetery. We've listed the following communities based on their distance, with the closest first.
- Hagansport
(3 miles [4.8 km] to the west)
- Jump to our Gazetteer entry for Hagansport
- Hagansport is located in Franklin County
- Talco
(5 miles [8 km] to the northeast)
- Mount Vernon
(9 miles [14.5 km] to the south)
- Bogata
(10 miles [16.1 km] to the north)
- Winfield
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Winfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Winfield
- Winfield is located in Titus County
- Population from the 2020 Census: 538 people
- Jump to TripAdvisor's Tourism page for Winfield <2>
- Green Hill
(11 miles [17.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Green Hill. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Green Hill
- Green Hill is located in Titus County
- Saltillo
(12 miles [19.3 km] to the southwest)
- Miller's Cove
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Miller's Cove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Miller's Cove
- Miller's Cove is located in Titus County
- Population from the 2020 Census: 175 people
- Cuthand
(12 miles [19.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Cuthand. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Cuthand
- Cuthand is located in Red River County
- Cunningham
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Cunningham have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cunningham
- Cunningham is located in Lamar County
- Jump to TripAdvisor's Tourism page for Cunningham <2>
- Sulphur Bluff
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Sulphur Bluff have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sulphur Bluff
- Sulphur Bluff is located in Hopkins County
- Jump to TripAdvisor's Tourism page for Sulphur Bluff <2>
- Sherry
(15 miles [24.1 km] to the north)
- Jump to our Gazetteer entry for Sherry
- Sherry is located in Red River County
- Weaver
(16 miles [25.7 km] to the southwest)
- Jump to our Gazetteer entry for Weaver
- Weaver is located in Hopkins County
- Purley
(16 miles [25.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Purley. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Purley
- Purley is located in Franklin County
- Mount Pleasant
(16 miles [25.7 km] to the southeast)
- Deport
(16 miles [25.7 km] to the northwest)
- Nelta
(16 miles [25.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Nelta. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Nelta
- Nelta is located in Hopkins County
- Greenwood
(17 miles [27.4 km] to the southwest)
- Jump to our Gazetteer entry for Greenwood
- Greenwood is located in Hopkins County
- Taylor Town
(17 miles [27.4 km] to the northwest)
- Jump to our Gazetteer entry for Taylor Town
- Taylor Town is located in Lamar County
- Dike
(18 miles [29 km] to the west)
- Clardy
(19 miles [30.6 km] to the northwest)
- Jump to our Gazetteer entry for Clardy
- Clardy is located in Lamar County
- Boxelder
(20 miles [32.2 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Boxelder. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Boxelder
- Boxelder is located in Red River County
- Charleston
(20 miles [32.2 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Charleston. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Charleston
- Charleston is located in Delta County
- Liberty
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Liberty have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Liberty
- Liberty is located in Red River County
- Tira
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Tira have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tira
- Tira is located in Hopkins County
- Population from the 2020 Census: 311 people
Off-the-Road Links ...
The official website for State of Texas: https://texas.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Murphy Cemetery. The point we use is located at these GPS coordinates - Latitude: 33.3240, Longitude: -95.1844 In this case, the coordinates for the Murphy Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|