Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Cuthand Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Cuthand Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Cuthand Cemetery (FG ID #1968428). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Cuthand Cemetery. We've listed the following communities based on their distance, with the closest first.
- Cuthand
(Less than 2 miles to the north)- Note: We haven't been able to verify our GPS coordinates for Cuthand. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Cuthand
- Cuthand is located in Red River County
- Google driving directions:
- From your current location to Cuthand
- From the Cuthand Cemetery to Cuthand
- Sherry
(6 miles [9.7 km] to the northwest)- Jump to our Gazetteer entry for Sherry
- Sherry is located in Red River County
- Google driving directions:
- From your current location to Sherry
- From the Cuthand Cemetery to Sherry
- Talco
(7 miles [11.3 km] to the south)- Jump to our Gazetteer entry for Talco
- Talco is located in Titus County
- Population from the 2020 Census: 497 people
- Jump to TripAdvisor's Tourism page for Talco <4>
- Google driving directions:
- From your current location to Talco
- From the Cuthand Cemetery to Talco
- Bogata
(9 miles [14.5 km] to the west)- Jump to our Gazetteer entry for Bogata
- Bogata is located in Red River County
- Population from the 2020 Census: 1,063 people
- Jump to TripAdvisor's Tourism page for Bogata <4>
- Google driving directions:
- From your current location to Bogata
- From the Cuthand Cemetery to Bogata
- Boxelder
(10 miles [16.1 km] to the east)- Note: We haven't been able to verify our GPS coordinates for Boxelder. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Boxelder
- Boxelder is located in Red River County
- Google driving directions:
- From your current location to Boxelder
- From the Cuthand Cemetery to Boxelder
- Clarksville
(10 miles [16.1 km] to the north)- Jump to our Gazetteer entry for Clarksville
- Clarksville is located in Red River County
- Population from the 2020 Census: 3,053 people
- Jump to TripAdvisor's Tourism page for Clarksville <4>
- Google driving directions:
- From your current location to Clarksville
- From the Cuthand Cemetery to Clarksville
- Annona
(11 miles [17.7 km] to the northeast)- Jump to our Gazetteer entry for Annona
- Annona is located in Red River County
- Population from the 2020 Census: 285 people
- Jump to TripAdvisor's Tourism page for Annona <4>
- Google driving directions:
- From your current location to Annona
- From the Cuthand Cemetery to Annona
- Hagansport
(13 miles [20.9 km] to the southwest)- Jump to our Gazetteer entry for Hagansport
- Hagansport is located in Franklin County
- Google driving directions:
- From your current location to Hagansport
- From the Cuthand Cemetery to Hagansport
- Liberty
(14 miles [22.5 km] to the northwest) - Green Hill
(15 miles [24.1 km] to the south)- Note: We haven't been able to verify our GPS coordinates for Green Hill. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Green Hill
- Green Hill is located in Titus County
- Google driving directions:
- From your current location to Green Hill
- From the Cuthand Cemetery to Green Hill
- Bagwell
(15 miles [24.1 km] to the northwest)- Jump to our Gazetteer entry for Bagwell
- Bagwell is located in Red River County
- Jump to TripAdvisor's Tourism page for Bagwell <4>
- Google driving directions:
- From your current location to Bagwell
- From the Cuthand Cemetery to Bagwell
- Deport
(15 miles [24.1 km] to the west)- Jump to our Gazetteer entry for Deport
- Deport is located in Lamar County
- Population from the 2020 Census: 555 people
- Jump to TripAdvisor's Tourism page for Deport <4>
- Google driving directions:
- From your current location to Deport
- From the Cuthand Cemetery to Deport
- English
(16 miles [25.7 km] to the northeast)- Jump to our Gazetteer entry for English
- English is located in Red River County
- Google driving directions:
- From your current location to English
- From the Cuthand Cemetery to English
- Avery
(17 miles [27.4 km] to the east)- Jump to our Gazetteer entry for Avery
- Avery is located in Red River County
- Population from the 2020 Census: 454 people
- Jump to TripAdvisor's Tourism page for Avery <4>
- Google driving directions:
- From your current location to Avery
- From the Cuthand Cemetery to Avery
- Cunningham
(17 miles [27.4 km] to the west)- Note: The GPS coordinates that we are using for Cunningham have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cunningham
- Cunningham is located in Lamar County
- Jump to TripAdvisor's Tourism page for Cunningham <4>
- Detroit
(18 miles [29 km] to the northwest)- Note: The GPS coordinates that we are using for Detroit have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Detroit
- Detroit is located in Red River County
- Population from the 2020 Census: 684 people
- Jump to TripAdvisor's Tourism page for Detroit <4>
- Winfield
(20 miles [32.2 km] to the south)- Note: The GPS coordinates that we are using for Winfield have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Winfield
- Winfield is located in Titus County
- Population from the 2020 Census: 538 people
- Jump to TripAdvisor's Tourism page for Winfield <4>
- Pattonville
(20 miles [32.2 km] to the west)- Jump to our Gazetteer entry for Pattonville
- Pattonville is located in Lamar County
- Jump to TripAdvisor's Tourism page for Pattonville <4>
- Google driving directions:
- From your current location to Pattonville
- From the Cuthand Cemetery to Pattonville
- Sulphur Bluff
(21 miles [33.8 km] to the southwest)- Note: The GPS coordinates that we are using for Sulphur Bluff have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sulphur Bluff
- Sulphur Bluff is located in Hopkins County
- Jump to TripAdvisor's Tourism page for Sulphur Bluff <4>
- Mount Vernon
(21 miles [33.8 km] to the southwest)- Jump to our Gazetteer entry for Mount Vernon
- Mount Vernon is located in Franklin County
- Population from the 2020 Census: 2,769 people
- Jump to TripAdvisor's Tourism page for Mount Vernon <4>
- Google driving directions:
- From your current location to Mount Vernon
- From the Cuthand Cemetery to Mount Vernon
- Miller's Cove
(21 miles [33.8 km] to the south)- Note: The GPS coordinates that we are using for Miller's Cove have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Miller's Cove
- Miller's Cove is located in Titus County
- Population from the 2020 Census: 175 people
- Mount Pleasant
(21 miles [33.8 km] to the south)- Jump to our Gazetteer entry for Mount Pleasant
- Mount Pleasant is located in Titus County
- Population from the 2020 Census: 16,020 people
- Jump to TripAdvisor's Tourism page for Mount Pleasant <4>
- Google driving directions:
- From your current location to Mount Pleasant
- From the Cuthand Cemetery to Mount Pleasant
- Cookville
(22 miles [35.4 km] to the southeast)- Note: The GPS coordinates that we are using for Cookville have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cookville
- Cookville is located in Titus County
- Jump to TripAdvisor's Tourism page for Cookville <4>
- Dalby Springs
(22 miles [35.4 km] to the east)- Jump to our Gazetteer entry for Dalby Springs
- Dalby Springs is located in Bowie County
- Google driving directions:
- From your current location to Dalby Springs
- From the Cuthand Cemetery to Dalby Springs
- Clardy
(22 miles [35.4 km] to the west)- Jump to our Gazetteer entry for Clardy
- Clardy is located in Lamar County
- Google driving directions:
- From your current location to Clardy
- From the Cuthand Cemetery to Clardy
- Taylor Town
(22 miles [35.4 km] to the west)- Jump to our Gazetteer entry for Taylor Town
- Taylor Town is located in Lamar County
- Google driving directions:
- From your current location to Taylor Town
- From the Cuthand Cemetery to Taylor Town
Off-the-Road Links ...
The official website for State of Texas: https://texas.gov/
Footnotes ...
| <1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
| <2> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Cuthand Cemetery. The point we use is located at these GPS coordinates - Latitude: 33.4615, Longitude: -95.0568 |
| <3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |