Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Concord Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Concord Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Concord Cemetery (FG ID #472775). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Concord Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Concord
(Less than 2 miles to the west)- Jump to our Gazetteer entry for Concord
- Concord is located in Leon County
- Jump to TripAdvisor's Tourism page for Concord <3>
- Marquez
(6 miles [9.7 km] to the west)- Jump to our Gazetteer entry for Marquez
- Marquez is located in Leon County
- Population from the 2020 Census: 271 people
- Jump to TripAdvisor's Tourism page for Marquez <3>
- Newby
(7 miles [11.3 km] to the north)- Jump to our Gazetteer entry for Newby
- Newby is located in Leon County
- Flynn
(7 miles [11.3 km] to the south)- Note: The GPS coordinates that we are using for Flynn have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Flynn
- Flynn is located in Leon County
- Jump to TripAdvisor's Tourism page for Flynn <3>
- Jewett
(7 miles [11.3 km] to the north)- Jump to our Gazetteer entry for Jewett
- Jewett is located in Leon County
- Population from the 2020 Census: 1,224 people
- Jump to TripAdvisor's Tourism page for Jewett <3>
- Centerville
(9 miles [14.5 km] to the east)- Jump to our Gazetteer entry for Centerville
- Centerville is located in Leon County
- Population from the 2020 Census: 906 people
- Jump to TripAdvisor's Tourism page for Centerville <3>
- Leona
(11 miles [17.7 km] to the southeast)- Note: The GPS coordinates that we are using for Leona have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leona
- Leona is located in Leon County
- Population from the 2020 Census: 179 people
- Jump to TripAdvisor's Tourism page for Leona <3>
- Hilltop Lakes
(12 miles [19.3 km] to the south)- Jump to our Gazetteer entry for Hilltop Lakes
- Hilltop Lakes is located in Leon County
- Jump to TripAdvisor's Tourism page for Hilltop Lakes <3>
- Ridge
(13 miles [20.9 km] to the southwest)- Jump to our Gazetteer entry for Ridge
- Ridge is located in Robertson County
- Buffalo
(14 miles [22.5 km] to the north)- Jump to our Gazetteer entry for Buffalo
- Buffalo is located in Leon County
- Population from the 2020 Census: 1,910 people
- Jump to TripAdvisor's Tourism page for Buffalo <3>
- Seale
(14 miles [22.5 km] to the west) - Normangee
(15 miles [24.1 km] to the south)- Note: The GPS coordinates that we are using for Normangee have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Normangee
- Normangee is located in Leon County
- Population from the 2020 Census: 710 people
- Jump to TripAdvisor's Tourism page for Normangee <3>
- Wealthy
(16 miles [25.7 km] to the south)- Jump to our Gazetteer entry for Wealthy
- Wealthy is located in Leon County
- Donie
(16 miles [25.7 km] to the north)- Jump to our Gazetteer entry for Donie
- Donie is located in Freestone County
- Jump to TripAdvisor's Tourism page for Donie <3>
- Farrar
(16 miles [25.7 km] to the northwest)- Jump to our Gazetteer entry for Farrar
- Farrar is located in Limestone County
- Middleton
(17 miles [27.4 km] to the east) - George
(19 miles [30.6 km] to the south)- Jump to our Gazetteer entry for George
- George is located in Madison County
- Centerview
(19 miles [30.6 km] to the east)- Jump to our Gazetteer entry for Centerview
- Centerview is located in Leon County
- Russell
(19 miles [30.6 km] to the northeast)- Jump to our Gazetteer entry for Russell
- Russell is located in Leon County
- Freestone
(20 miles [32.2 km] to the north)- Jump to our Gazetteer entry for Freestone
- Freestone is located in Freestone County
- Personville
(21 miles [33.8 km] to the northwest)- Jump to our Gazetteer entry for Personville
- Personville is located in Limestone County
- Lost Prairie
(21 miles [33.8 km] to the northwest)- Jump to our Gazetteer entry for Lost Prairie
- Lost Prairie is located in Limestone County
- New Baden
(22 miles [35.4 km] to the southwest)- Jump to our Gazetteer entry for New Baden
- New Baden is located in Robertson County
- Jump to TripAdvisor's Tourism page for New Baden <3>
- Dew
(23 miles [37 km] to the north)- Jump to our Gazetteer entry for Dew
- Dew is located in Freestone County
- North Zulch
(23 miles [37 km] to the south)- Jump to our Gazetteer entry for North Zulch
- North Zulch is located in Madison County
- Jump to TripAdvisor's Tourism page for North Zulch <3>
Off-the-Road Links ...
The official website for State of Texas: https://texas.gov/
Footnotes ...
| <1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
| <2> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Concord Cemetery. The point we use is located at these GPS coordinates - Latitude: 31.2558, Longitude: -96.1398 |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |