|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Brushy Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Brushy Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Brushy Cemetery. We've listed the following communities based on their distance, with the closest first.
- Ridge
(3 miles [4.8 km] to the southwest)
- Jump to our Gazetteer entry for Ridge
- Ridge is located in Robertson County
- Marquez
(4 miles [6.4 km] to the north)
- Hilltop Lakes
(7 miles [11.3 km] to the southeast)
- Flynn
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Flynn have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Flynn
- Flynn is located in Leon County
- Jump to TripAdvisor's Tourism page for Flynn <2>
- Concord
(9 miles [14.5 km] to the northeast)
- Seale
(11 miles [17.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Seale. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Seale
- Seale is located in Robertson County
- New Baden
(12 miles [19.3 km] to the southwest)
- Wealthy
(12 miles [19.3 km] to the southeast)
- Jump to our Gazetteer entry for Wealthy
- Wealthy is located in Leon County
- Normangee
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Normangee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Normangee
- Normangee is located in Leon County
- Population from the 2020 Census: 710 people
- Jump to TripAdvisor's Tourism page for Normangee <2>
- Newby
(13 miles [20.9 km] to the northeast)
- Jump to our Gazetteer entry for Newby
- Newby is located in Leon County
- Jewett
(14 miles [22.5 km] to the northeast)
- Owensville
(16 miles [25.7 km] to the southwest)
- Jump to our Gazetteer entry for Owensville
- Owensville is located in Robertson County
- Franklin
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Franklin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Franklin
- Franklin is located in Robertson County
- Population from the 2020 Census: 1,643 people
- Jump to TripAdvisor's Tourism page for Franklin <2>
- George
(17 miles [27.4 km] to the southeast)
- Jump to our Gazetteer entry for George
- George is located in Madison County
- Leona
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Leona have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leona
- Leona is located in Leon County
- Population from the 2020 Census: 179 people
- Jump to TripAdvisor's Tourism page for Leona <2>
- Centerville
(18 miles [29 km] to the east)
- Farrar
(19 miles [30.6 km] to the north)
- Jump to our Gazetteer entry for Farrar
- Farrar is located in Limestone County
- Wheelock
(20 miles [32.2 km] to the south)
- Edge
(20 miles [32.2 km] to the south)
- Jump to our Gazetteer entry for Edge
- Edge is located in Brazos County
- North Zulch
(20 miles [32.2 km] to the southeast)
- Donie
(20 miles [32.2 km] to the north)
- Lost Prairie
(22 miles [35.4 km] to the north)
- Jump to our Gazetteer entry for Lost Prairie
- Lost Prairie is located in Limestone County
- Zulch ‑ Historic
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Zulch came from an uncertain source and they still need to be verified:<5>
- Jump to our Gazetteer entry for Zulch
- Zulch is located in Madison County
- Buffalo
(22 miles [35.4 km] to the northeast)
- Elliot
(23 miles [37 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Elliot. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Elliot
- Elliot is located in Robertson County
- Middleton
(23 miles [37 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Middleton. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Middleton
- Middleton is located in Leon County
- Kosse
(23 miles [37 km] to the west)
- Bremond
(23 miles [37 km] to the west)
- Personville
(23 miles [37 km] to the north)
- Jump to our Gazetteer entry for Personville
- Personville is located in Limestone County
Off-the-Road Links ...
The official website for State of Texas: https://texas.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Brushy Cemetery. The point we use is located at these GPS coordinates - Latitude: 31.1799, Longitude: -96.2697 In this case, the coordinates for the Brushy Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database. |
|
|