TripAdvisor Links
Introduction ...
Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
In addition, you'll find a link to the TripAdvisor Forum for Barry. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.
All of this can be found on the TripAdvisor's Tourism page for Barry.
The following list should help you find nearby communities that also have TripAdvisor pages.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Barry - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 39 communities listed:
- Abbott
(29 miles [46.7 km] to the southwest)
- Avalon
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Avalon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Avalon
- Avalon is located in Ellis County
- Jump to TripAdvisor's Tourism page for Avalon <2>
- Bardwell
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Bardwell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bardwell
- Bardwell is located in Ellis County
- Population from the 2020 Census: 709 people
- Jump to TripAdvisor's Tourism page for Bardwell <2>
- Blooming Grove
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Blooming Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blooming Grove
- Blooming Grove is located in Navarro County
- Population from the 2020 Census: 831 people
- Jump to TripAdvisor's Tourism page for Blooming Grove <2>
- Brandon
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Brandon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brandon
- Brandon is located in Hill County
- Jump to TripAdvisor's Tourism page for Brandon <2>
- Bynum
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for Bynum have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bynum
- Bynum is located in Hill County
- Population from the 2020 Census: 208 people
- Jump to TripAdvisor's Tourism page for Bynum <2>
- Chatfield
(16 miles [25.7 km] to the northeast)
- Coolidge
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for Coolidge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coolidge
- Coolidge is located in Limestone County
- Population from the 2020 Census: 950 people
- Jump to TripAdvisor's Tourism page for Coolidge <2>
- Corsicana
(9 miles [14.5 km] to the east)
- Dawson
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Dawson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dawson
- Dawson is located in Navarro County
- Population from the 2020 Census: 798 people
- Jump to TripAdvisor's Tourism page for Dawson <2>
- Ennis
(15 miles [24.1 km] to the north)
- Ferris
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Ferris have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ferris
- Ferris is located in Dallas County
- Population from the 2020 Census: 3,069 people
- Jump to TripAdvisor's Tourism page for Ferris <2>
- Forreston
(17 miles [27.4 km] to the northwest)
- Frost
(10 miles [16.1 km] to the west)
- Hillsboro
(29 miles [46.7 km] to the west)
- Hubbard
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Hubbard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hubbard
- Hubbard is located in Hill County
- Population from the 2020 Census: 1,418 people
- Jump to TripAdvisor's Tourism page for Hubbard <2>
- Irene
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Irene have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Irene
- Irene is located in Hill County
- Jump to TripAdvisor's Tourism page for Irene <2>
- Italy
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Italy have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Italy
- Italy is located in Ellis County
- Population from the 2020 Census: 1,964 people
- Jump to TripAdvisor's Tourism page for Italy <2>
- Itasca
(30 miles [48.3 km] to the west)
- Kerens
(24 miles [38.6 km] to the east)
- Kirvin
(29 miles [46.7 km] to the southeast)
- Malone
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Malone have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Malone
- Malone is located in Hill County
- Population from the 2020 Census: 285 people
- Jump to TripAdvisor's Tourism page for Malone <2>
- Maypearl
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Maypearl have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maypearl
- Maypearl is located in Ellis County
- Population from the 2020 Census: 1,046 people
- Jump to TripAdvisor's Tourism page for Maypearl <2>
- Mertens
(15 miles [24.1 km] to the west)
- Mexia
(30 miles [48.3 km] to the south)
- Milford
(18 miles [29 km] to the west)
- Mount Calm
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Mount Calm have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Calm
- Mount Calm is located in Hill County
- Population from the 2020 Census: 340 people
- Jump to TripAdvisor's Tourism page for Mount Calm <2>
- Palmer
(22 miles [35.4 km] to the north)
- Penelope
(23 miles [37 km] to the southwest)
- Purdon
(10 miles [16.1 km] to the south)
- Red Oak
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Red Oak have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Oak
- Red Oak is located in Ellis County
- Population from the 2020 Census: 14,098 people
- Jump to TripAdvisor's Tourism page for Red Oak <2>
- Rice
(12 miles [19.3 km] to the northeast)
- Rosser
(27 miles [43.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Rosser have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rosser
- Rosser is located in Kaufman County
- Population from the 2020 Census: 422 people
- Jump to TripAdvisor's Tourism page for Rosser <2>
- Seven Points
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Seven Points have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Seven Points
- Seven Points is located in Henderson County
- Population from the 2020 Census: 1,557 people
- Jump to TripAdvisor's Tourism page for Seven Points <2>
- Streetman
(23 miles [37 km] to the southeast)
- Tehuacana
(25 miles [40.2 km] to the south)
- Tool
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Tool have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tool
- Tool is located in Henderson County
- Population from the 2020 Census: 2,335 people
- Jump to TripAdvisor's Tourism page for Tool <2>
- Waxahachie
(23 miles [37 km] to the northwest)
- Wortham
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Wortham have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wortham
- Wortham is located in Freestone County
- Population from the 2020 Census: 1,007 people
- Jump to TripAdvisor's Tourism page for Wortham <2>
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Barry. If you can help, please contact us through our Feedback Page.
The official website for State of Texas: https://texas.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Barry) to Point B.Our distance measurements begin at a specific point in Barry. The point we use is located at these GPS coordinates - Latitude: 32.0994, Longitude: -96.6364 |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |