Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Two Hills in the Atlas, the following communities of the 1890's would have been found near the current location of Two Hills. The following communities are listed based on their distance, with the one closest to Two Hills listed first.
- Compton
(Less than 2 miles to the north)
- Compton is located in Rutherford County
- Jump to our Gazetteer entry for Compton
- Sharpsville
(3 miles [4.8 km] to the southeast)
- Sharpsville is located in Rutherford County
- Jump to our Gazetteer entry for Sharpsville
- Murfreesboro
(4 miles [6.4 km] to the southwest)
- Walterhill
(4 miles [6.4 km] to the northwest)
- Walterhill is located in Rutherford County
- Jump to our Gazetteer entry for Walterhill
- Halls Hill
(5 miles [8 km] to the east)
- Halls Hill is located in Rutherford County
- Jump to our Gazetteer entry for Halls Hill
- Dillton
(6 miles [9.7 km] to the south)
- Dillton is located in Rutherford County
- Jump to our Gazetteer entry for Dillton
- Kittrell
(7 miles [11.3 km] to the southeast)
- Kittrell is located in Rutherford County
- Jump to our Gazetteer entry for Kittrell
- Cainsville
(7 miles [11.3 km] to the northeast)
- Cainsville is located in Wilson County
- Jump to our Gazetteer entry for Cainsville
- Floraton
(8 miles [12.9 km] to the southeast)
- Floraton is located in Rutherford County
- Jump to our Gazetteer entry for Floraton
- Milton
(8 miles [12.9 km] to the east)
- Milton is located in Rutherford County
- Jump to our Gazetteer entry for Milton
- Readyville
(9 miles [14.5 km] to the southeast)
- Porterfield
(9 miles [14.5 km] to the east)
- Porterfield is located in Cannon County
- Jump to our Gazetteer entry for Porterfield
- Overall
(10 miles [16.1 km] to the southwest)
- Overall is located in Rutherford County
- Jump to our Gazetteer entry for Overall
- Rucker
(10 miles [16.1 km] to the south)
- Rucker is located in Rutherford County
- Jump to our Gazetteer entry for Rucker
- Greenvale
(10 miles [16.1 km] to the northeast)
- Greenvale is located in Wilson County
- Jump to our Gazetteer entry for Greenvale
- Oak Point ‑ Historic
(11 miles [17.7 km] to the north)
- Oak Point is located in Wilson County
- Jump to our Gazetteer entry for Oak Point
- Smyrna
(11 miles [17.7 km] to the northwest)
- Snell ‑ Historic
(12 miles [19.3 km] to the west)
- Snell is located in Rutherford County
- Jump to our Gazetteer entry for Snell
- Estimated population in 2014: 1,361 people
- Crescent
(12 miles [19.3 km] to the southwest)
- Crescent is located in Rutherford County
- Jump to our Gazetteer entry for Crescent
- Donnell Chapel
(12 miles [19.3 km] to the southeast)
- Donnell Chapel is located in Rutherford County
- Jump to our Gazetteer entry for Donnell Chapel
- Vesta
(12 miles [19.3 km] to the northwest)
- Vesta is located in Wilson County
- Jump to our Gazetteer entry for Vesta
- Cateston
(12 miles [19.3 km] to the southeast)
- Cateston is located in Cannon County
- Jump to our Gazetteer entry for Cateston
- Bairds Mill
(14 miles [22.5 km] to the north)
- Bairds Mill is located in Wilson County
- Jump to our Gazetteer entry for Bairds Mill
- Rockvale
(14 miles [22.5 km] to the southwest)
- Bradyville
(14 miles [22.5 km] to the southeast)
- Bradyville is located in Cannon County
- Jump to our Gazetteer entry for Bradyville
- Burt
(14 miles [22.5 km] to the southeast)
- Burt is located in Cannon County
- Jump to our Gazetteer entry for Burt
- Statesville
(14 miles [22.5 km] to the northeast)
- Statesville is located in Wilson County
- Jump to our Gazetteer entry for Statesville
- Rocky Fork
(14 miles [22.5 km] to the west)
- Rocky Fork is located in Rutherford County
- Jump to our Gazetteer entry for Rocky Fork
- Almaville
(14 miles [22.5 km] to the west)
- Almaville is located in Rutherford County
- Jump to our Gazetteer entry for Almaville
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Two Hills, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |