RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Union County >> Plainview >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Plainview (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Plainview. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Plainview is located in Union County.

To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Union County: Anderson, Campbell, Claiborne, Grainger & Knox.

Below are the counties that are near Plainview. For each of these counties, we show a sample of those communities that are closest to Plainview:

  • Union County     (The home county of Plainview)
    • The following are listed by their distance from Plainview, with the one closest to Plainview listed first.
    • Luttrell
      (3 miles [4.8 km] to the northeast)
      • Jump to our Gazetteer entry for Luttrell
      • Luttrell is located in Union County
      • Population from the 2020 Census: 1,088 people
    • Maynardville
      (4 miles [6.4 km] to the north)
      • Note: The GPS coordinates that we are using for Maynardville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Maynardville
      • Maynardville is located in Union County
      • Population from the 2020 Census: 2,452 people
      • Jump to TripAdvisor's Tourism page for Maynardville <2>
    • Warwicktown
      (5 miles [8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Warwicktown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Warwicktown
      • Warwicktown is located in Union County
      • Estimated population in 2014: 658 people
    • Paulette
      (5 miles [8 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Paulette. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Paulette
      • Paulette is located in Union County
    • Gabe ‑ Historic
      (7 miles [11.3 km] to the west)
      • Note: The GPS coordinates that we are using for Gabe have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gabe
      • Gabe is located in Union County
    • Loo ‑ Historic
      (10 miles [16.1 km] to the north)
      • Note: The GPS coordinates that we are using for Loo have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Loo
      • Loo is located in Union County
    • Lost Creek ‑ Historic
      (10 miles [16.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Lost Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lost Creek
      • Lost Creek is located in Union County
    • Loyston ‑ Historic
      (10 miles [16.1 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Loyston. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Loyston
      • Loyston is located in Union County
    • Rhodelia ‑ Historic
      (12 miles [19.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Rhodelia have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rhodelia
      • Rhodelia is located in Union County
    • Haynes ‑ Historic
      (13 miles [20.9 km] to the northeast)
      • Note: The GPS coordinates that we are using for Haynes have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Haynes
      • Haynes is located in Union County
    • Phebe ‑ Historic
      (15 miles [24.1 km] to the north)
      • Note: The GPS coordinates that we are using for Phebe have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Phebe
      • Phebe is located in Union County
    • Long Hollow ‑ Historic
      (15 miles [24.1 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Long Hollow. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Long Hollow
      • Long Hollow is located in Union County
  • Anderson County
    • The following are listed by their distance from Plainview, with the one closest to Plainview listed first.
    • Andersonville
      (13 miles [20.9 km] to the west)
      • Jump to our Gazetteer entry for Andersonville
      • Andersonville is located in Anderson County
      • Population from the 2010 Census: 472 people
    • Panther ‑ Historic
      (13 miles [20.9 km] to the west)
      • Note: The GPS coordinates that we are using for Panther have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Panther
      • Panther is located in Anderson County
    • Bethel
      (15 miles [24.1 km] to the west)
      • Note: The GPS coordinates that we are using for Bethel have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bethel
      • Bethel is located in Anderson County
      • Estimated population in 2014: 719 people
    • Norris
      (15 miles [24.1 km] to the west)
      • Note: The GPS coordinates that we are using for Norris have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Norris
      • Norris is located in Anderson County
      • Population from the 2020 Census: 1,612 people
      • Jump to TripAdvisor's Tourism page for Norris <2>
    • Peak
      (19 miles [30.6 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Peak. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Peak
      • Peak is located in Anderson County
    • Clinton
      (19 miles [30.6 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Clinton. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Clinton
      • Clinton is located in Anderson County
      • Population from the 2020 Census: 10,119 people
      • Jump to TripAdvisor's Tourism page for Clinton <2>
    • Claxton
      (20 miles [32.2 km] to the southwest)
      • Jump to our Gazetteer entry for Claxton
      • Claxton is located in Anderson County
    • Rocky Top
      (20 miles [32.2 km] to the west)
      • Jump to our Gazetteer entry for Rocky Top
      • Rocky Top is located in Anderson County
      • Population from the 2020 Census: 1,776 people
      • Former names for Rocky Top:
      • Coal Creek
      • Lake City
      • Jump to TripAdvisor's Tourism page for Rocky Top <2>
    • Spring Hill
      (21 miles [33.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Spring Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Spring Hill
      • Spring Hill is located in Anderson County
      • Estimated population in 2014: 16,752 people
    • Fraterville
      (21 miles [33.8 km] to the west)
      • Note: The GPS coordinates that we are using for Fraterville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fraterville
      • Fraterville is located in Anderson County
      • Estimated population in 2014: 70,612 people
    • Leinarts
      (22 miles [35.4 km] to the west)
      • Jump to our Gazetteer entry for Leinarts
      • Leinarts is located in Anderson County
    • Fairview ‑ Historic
      (27 miles [43.5 km] to the west)
      • Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fairview
      • Fairview is located in Anderson County
  • Blount County
    • The following are listed by their distance from Plainview, with the one closest to Plainview listed first.
    • Rockford
      (25 miles [40.2 km] to the south)
      • Note: The GPS coordinates that we are using for Rockford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rockford
      • Rockford is located in Blount County
      • Population from the 2020 Census: 851 people
    • Wildwood
      (26 miles [41.8 km] to the south)
      • Jump to our Gazetteer entry for Wildwood
      • Wildwood is located in Blount County
    • Alcoa
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Alcoa have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Alcoa
      • Alcoa is located in Blount County
      • Population from the 2020 Census: 10,382 people
      • Jump to TripAdvisor's Tourism page for Alcoa <2>
    • Eagleton Village
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Eagleton Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Eagleton Village
      • Eagleton Village is located in Blount County
      • Population from the 2010 Census: 5,052 people
    • Louisville
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Louisville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Louisville
      • Louisville is located in Blount County
      • Population from the 2020 Census: 4,139 people
      • Jump to TripAdvisor's Tourism page for Louisville <2>
    • Cowan Springs
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for Cowan Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cowan Springs
      • Cowan Springs is located in Blount County
      • Estimated population in 2014: 9,010 people
    • Rockgardens
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for Rockgardens have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rockgardens
      • Rockgardens is located in Blount County
      • Estimated population in 2014: 861 people
    • Maryville
      (30 miles [48.3 km] to the south)
    • Rocky Branch
      (30 miles [48.3 km] to the south)
      • Note: The GPS coordinates that we are using for Rocky Branch have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rocky Branch
      • Rocky Branch is located in Blount County
      • Estimated population in 2014: 5,427 people
  • Campbell County
    • The following are listed by their distance from Plainview, with the one closest to Plainview listed first.
    • Forkvale ‑ Historic
      (13 miles [20.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for Forkvale have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Forkvale
      • Forkvale is located in Campbell County
    • Girlton ‑ Historic
      (16 miles [25.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Girlton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Girlton
      • Girlton is located in Campbell County
    • Boy ‑ Historic
      (17 miles [27.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Boy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Boy
      • Boy is located in Campbell County
    • Flat Hollow
      (17 miles [27.4 km] to the northwest)
      • Jump to our Gazetteer entry for Flat Hollow
      • Flat Hollow is located in Campbell County
    • Hatmaker ‑ Historic
      (17 miles [27.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Hatmaker have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hatmaker
      • Hatmaker is located in Campbell County
    • Demory
      (18 miles [29 km] to the northwest)
      • Jump to our Gazetteer entry for Demory
      • Demory is located in Campbell County
    • Pine Crest
      (19 miles [30.6 km] to the west)
      • Note: The GPS coordinates that we are using for Pine Crest have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pine Crest
      • Pine Crest is located in Campbell County
      • Population from the 2010 Census: 2,388 people
    • Stockville ‑ Historic
      (20 miles [32.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for Stockville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stockville
      • Stockville is located in Campbell County
    • Fincastle
      (21 miles [33.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Fincastle have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fincastle
      • Fincastle is located in Campbell County
      • Population from the 2010 Census: 1,618 people
    • LaFollette
      (22 miles [35.4 km] to the northwest)
      • Jump to our Gazetteer entry for LaFollette
      • LaFollette is located in Campbell County
      • Population from the 2020 Census: 6,585 people
      • LaFollette has also been known as:
      • Big Creek Gap
      • Jump to TripAdvisor's Tourism page for LaFollette <2>
    • Jacksboro
      (24 miles [38.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Jacksboro have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jacksboro
      • Jacksboro is located in Campbell County
      • Population from the 2020 Census: 2,066 people
      • Jump to TripAdvisor's Tourism page for Jacksboro <2>
    • Caryville
      (25 miles [40.2 km] to the west)
      • Note: The GPS coordinates that we are using for Caryville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Caryville
      • Caryville is located in Campbell County
      • Population from the 2020 Census: 2,122 people
      • Jump to TripAdvisor's Tourism page for Caryville <2>
  • Claiborne County
    • The following are listed by their distance from Plainview, with the one closest to Plainview listed first.
    • Big Barren
      (15 miles [24.1 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Big Barren. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Big Barren
      • Big Barren is located in Claiborne County
    • Sandlick
      (16 miles [25.7 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Sandlick. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Sandlick
      • Sandlick is located in Claiborne County
    • Goin
      (17 miles [27.4 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Goin. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Goin
      • Goin is located in Claiborne County
    • Lone Mountain
      (18 miles [29 km] to the northeast)
      • Jump to our Gazetteer entry for Lone Mountain
      • Lone Mountain is located in Claiborne County
    • Speedwell
      (19 miles [30.6 km] to the north)
    • Head of Barren
      (19 miles [30.6 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Head of Barren. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Head of Barren
      • Head of Barren is located in Claiborne County
    • New Tazewell
      (21 miles [33.8 km] to the northeast)
    • Springdale
      (22 miles [35.4 km] to the northeast)
      • Jump to our Gazetteer entry for Springdale
      • Springdale is located in Claiborne County
    • Raven Hill
      (23 miles [37 km] to the northeast)
      • Jump to our Gazetteer entry for Raven Hill
      • Raven Hill is located in Claiborne County
    • Tazewell
      (23 miles [37 km] to the northeast)
      • Note: The GPS coordinates that we are using for Tazewell have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tazewell
      • Tazewell is located in Claiborne County
      • Population from the 2020 Census: 2,275 people
      • Jump to TripAdvisor's Tourism page for Tazewell <2>
    • Minton Mill
      (24 miles [38.6 km] to the north)
      • Note: The GPS coordinates that we are using for Minton Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Minton Mill
      • Minton Mill is located in Claiborne County
      • Estimated population in 2014: 527 people
    • Evans Ferry
      (24 miles [38.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Evans Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Evans Ferry
      • Evans Ferry is located in Claiborne County
      • Population from the 2010 Census: 293 people
  • Grainger County
    • The following are listed by their distance from Plainview, with the one closest to Plainview listed first.
    • Blaine
      (5 miles [8 km] to the east)
      • Note: The GPS coordinates that we are using for Blaine have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blaine
      • Blaine is located in Grainger County
      • Population from the 2020 Census: 1,869 people
      • Jump to TripAdvisor's Tourism page for Blaine <2>
    • Lea Springs
      (6 miles [9.7 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Lea Springs. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Lea Springs
      • Lea Springs is located in Grainger County
    • Maples ‑ Historic
      (7 miles [11.3 km] to the east)
      • Note: The GPS coordinates that we are using for Maples have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Maples
      • Maples is located in Grainger County
    • Joppa
      (10 miles [16.1 km] to the east)
      • Jump to our Gazetteer entry for Joppa
      • Joppa is located in Grainger County
    • Massengill Mill
      (13 miles [20.9 km] to the east)
      • Note: The GPS coordinates that we are using for Massengill Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Massengill Mill
      • Massengill Mill is located in Grainger County
      • Estimated population in 2014: 1,600 people
    • Lulaville
      (13 miles [20.9 km] to the northeast)
      • Note: The GPS coordinates that we are using for Lulaville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lulaville
      • Lulaville is located in Grainger County
    • Washburn
      (13 miles [20.9 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Washburn. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Washburn
      • Washburn is located in Grainger County
    • Dyers Ferry
      (16 miles [25.7 km] to the east)
      • Note: The GPS coordinates that we are using for Dyers Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dyers Ferry
      • Dyers Ferry is located in Grainger County
      • Estimated population in 2014: 16,839 people
    • Oakland
      (16 miles [25.7 km] to the east)
      • Note: The GPS coordinates that we are using for Oakland have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oakland
      • Oakland is located in Grainger County
      • Estimated population in 2014: 7,316 people
    • Rutledge
      (16 miles [25.7 km] to the northeast)
    • Wa-Ni Village
      (19 miles [30.6 km] to the east)
      • Note: The GPS coordinates that we are using for Wa-Ni Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wa-Ni Village
      • Wa-Ni Village is located in Grainger County
    • Bowen
      (22 miles [35.4 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Bowen. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Bowen
      • Bowen is located in Grainger County
  • Hamblen County
    • The following are listed by their distance from Plainview, with the one closest to Plainview listed first.
    • Collons Ferry
      (19 miles [30.6 km] to the east)
      • Note: The GPS coordinates that we are using for Collons Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Collons Ferry
      • Collons Ferry is located in Hamblen County
      • Estimated population in 2014: 986 people
    • Casablanca
      (26 miles [41.8 km] to the east)
      • Note: The GPS coordinates that we are using for Casablanca have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Casablanca
      • Casablanca is located in Hamblen County
      • Estimated population in 2014: 2,223 people
    • Morristown
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Morristown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Morristown
      • Morristown is located in Hamblen County
      • Population from the 2020 Census: 30,275 people
      • Jump to TripAdvisor's Tourism page for Morristown <2>
    • Monte Vista Estates
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for Monte Vista Estates have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Monte Vista Estates
      • Monte Vista Estates is located in Hamblen County
      • Estimated population in 2014: 2,860 people
  • Jefferson County
    • The following are listed by their distance from Plainview, with the one closest to Plainview listed first.
    • Strawberry Plains
      (10 miles [16.1 km] to the southeast)
    • New Market
      (14 miles [22.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for New Market have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Market
      • New Market is located in Jefferson County
      • Population from the 2020 Census: 1,381 people
      • Jump to TripAdvisor's Tourism page for New Market <2>
    • Rocky Valley
      (16 miles [25.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Rocky Valley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rocky Valley
      • Rocky Valley is located in Jefferson County
      • Estimated population in 2014: 1,771 people
    • Jefferson City
      (17 miles [27.4 km] to the east)
    • Alena ‑ Historic
      (17 miles [27.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Alena have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Alena
      • Alena is located in Jefferson County
    • Dumplin
      (17 miles [27.4 km] to the southeast)
      • Jump to our Gazetteer entry for Dumplin
      • Dumplin is located in Jefferson County
    • Cook Mill
      (18 miles [29 km] to the southeast)
      • Note: The GPS coordinates that we are using for Cook Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cook Mill
      • Cook Mill is located in Jefferson County
      • Estimated population in 2014: 31,335 people
    • Piedmont
      (18 miles [29 km] to the southeast)
      • Jump to our Gazetteer entry for Piedmont
      • Piedmont is located in Jefferson County
    • Rock Town
      (19 miles [30.6 km] to the east)
      • Note: The GPS coordinates that we are using for Rock Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rock Town
      • Rock Town is located in Jefferson County
    • Flat Gap
      (19 miles [30.6 km] to the southeast)
      • Jump to our Gazetteer entry for Flat Gap
      • Flat Gap is located in Jefferson County
    • Talbott
      (21 miles [33.8 km] to the east)
    • Dandridge
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Dandridge have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dandridge
      • Dandridge is located in Jefferson County
      • Population from the 2020 Census: 3,182 people
      • Jump to TripAdvisor's Tourism page for Dandridge <2>
  • Knox County
    • The following are listed by their distance from Plainview, with the one closest to Plainview listed first.
    • Corryton
      (Less than 2 miles to the south)
    • Zacharytown
      (4 miles [6.4 km] to the southeast)
      • Jump to our Gazetteer entry for Zacharytown
      • Zacharytown is located in Knox County
    • Maloneyville
      (6 miles [9.7 km] to the south)
      • Jump to our Gazetteer entry for Maloneyville
      • Maloneyville is located in Knox County
    • Skaggston
      (6 miles [9.7 km] to the south)
      • Jump to our Gazetteer entry for Skaggston
      • Skaggston is located in Knox County
    • Ridgeview Heights
      (6 miles [9.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Ridgeview Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ridgeview Heights
      • Ridgeview Heights is located in Knox County
      • Estimated population in 2014: 1,979 people
    • Copper Ridge
      (7 miles [11.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Copper Ridge have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Copper Ridge
      • Copper Ridge is located in Knox County
      • Estimated population in 2014: 333 people
    • Mascot
      (8 miles [12.9 km] to the south)
      • Note: The GPS coordinates that we are using for Mascot have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mascot
      • Mascot is located in Knox County
      • Population from the 2010 Census: 2,411 people
    • Bayless ‑ Historic
      (8 miles [12.9 km] to the west)
      • Note: The GPS coordinates that we are using for Bayless have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bayless
      • Bayless is located in Knox County
      • Estimated population in 2014: 1,396 people
    • John Sevier
      (9 miles [14.5 km] to the south)
      • Jump to our Gazetteer entry for John Sevier
      • John Sevier is located in Knox County
    • McMillan
      (9 miles [14.5 km] to the south)
      • Note: The GPS coordinates that we are using for McMillan have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McMillan
      • McMillan is located in Knox County
    • Highpoint ‑ Historic
      (10 miles [16.1 km] to the south)
      • Note: The GPS coordinates that we are using for Highpoint have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Highpoint
      • Highpoint is located in Knox County
    • Halls
      (10 miles [16.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Halls have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Halls
      • Halls is located in Knox County
  • Sevier County
    • The following are listed by their distance from Plainview, with the one closest to Plainview listed first.
    • Kodak
      (17 miles [27.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Kodak have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kodak
      • Kodak is located in Sevier County
      • Estimated population in 2014: 184,281 people
      • Jump to TripAdvisor's Tourism page for Kodak <2>
    • Boyds Creek
      (19 miles [30.6 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Boyds Creek. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Boyds Creek
      • Boyds Creek is located in Sevier County
    • Henry Crossroads
      (19 miles [30.6 km] to the southeast)
      • Jump to our Gazetteer entry for Henry Crossroads
      • Henry Crossroads is located in Sevier County
    • Oak City
      (20 miles [32.2 km] to the south)
      • Note: The GPS coordinates that we are using for Oak City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oak City
      • Oak City is located in Sevier County
    • Seymour
      (20 miles [32.2 km] to the south)
      • Note: The GPS coordinates that we are using for Seymour have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Seymour
      • Seymour is located in Sevier County
      • Jump to TripAdvisor's Tourism page for Seymour <2>
    • Seymour Heights
      (21 miles [33.8 km] to the south)
      • Note: The GPS coordinates that we are using for Seymour Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Seymour Heights
      • Seymour Heights is located in Sevier County
      • Population from the 2010 Census: 10,919 people
    • Catlettsburg
      (22 miles [35.4 km] to the southeast)
      • Jump to our Gazetteer entry for Catlettsburg
      • Catlettsburg is located in Sevier County
    • Millican Grove
      (24 miles [38.6 km] to the southeast)
      • Jump to our Gazetteer entry for Millican Grove
      • Millican Grove is located in Sevier County
    • Dupont
      (25 miles [40.2 km] to the south)
      • Jump to our Gazetteer entry for Dupont
      • Dupont is located in Sevier County
    • Sevierville
      (25 miles [40.2 km] to the southeast)
    • Harrisburg
      (27 miles [43.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Harrisburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harrisburg
      • Harrisburg is located in Sevier County
      • Estimated population in 2014: 6,219 people
    • Middle Creek
      (28 miles [45.1 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Middle Creek. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Middle Creek
      • Middle Creek is located in Sevier County
  • Bell County (KY)
    • The following are listed by their distance from Plainview, with the one closest to Plainview listed first.
    • Fonde
      (28 miles [45.1 km] to the north)
      • Jump to our Gazetteer entry for Fonde
      • Fonde is located in Bell County (KY)
    • Premier
      (28 miles [45.1 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Premier. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Premier
      • Premier is located in Bell County (KY)
    • Pruden
      (28 miles [45.1 km] to the north)
      • Jump to our Gazetteer entry for Pruden
      • Pruden is located in Bell County (KY)
    • Yellow Creek
      (28 miles [45.1 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Yellow Creek. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Yellow Creek
      • Yellow Creek is located in Bell County (KY)
    • Capito
      (29 miles [46.7 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Capito. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Capito
      • Capito is located in Bell County (KY)
    • Edgewood
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for Edgewood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Edgewood
      • Edgewood is located in Bell County (KY)
    • Middlesboro
      (29 miles [46.7 km] to the north)
    • Stony Fork Junction
      (29 miles [46.7 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Stony Fork Junction. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Stony Fork Junction
      • Stony Fork Junction is located in Bell County (KY)

For an expanded list of the communities that are closest to Plainview, see our County-by-County Page for Plainview.

Cemeteries Near Plainview ...

Below are cemeteries that are in the vicinity of Plainview.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Plainview covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Plainview, with the one closest to Plainview listed first.

  • John Hubbs Cemetery
    (Less than 2 miles to the east)
    • Jump to our Gazetteer entry for the John Hubbs Cemetery
    • Note: We haven't been able to verify our GPS coordinates for the John Hubbs Cemetery. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • To give a relative sense of its location, the John Hubbs Cemetery is located outside and to the east of Plainview.
    • The John Hubbs Cemetery has also been known as:
    • Hubbs Cemetery
    • Jump to Find-A-Grave: FG ID #2339883 <4>
  • Clear Branch Cemetery
    (Less than 2 miles to the northwest)
    • Jump to our Gazetteer entry for the Clear Branch Cemetery
    • Note: The GPS coordinates that we are using for the Clear Branch Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Sharp Cemetery
    (Less than 2 miles to the east)
    • Jump to our Gazetteer entry for the Sharp Cemetery
    • Note: The GPS coordinates that we are using for the Sharp Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Chesney Cemetery
    (Less than 2 miles to the northeast)
    • Jump to our Gazetteer entry for the Chesney Cemetery
    • Note: The GPS coordinates that we are using for the Chesney Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Chesney Cemetery
    (Less than 2 miles to the north)
    • Jump to our Gazetteer entry for the Chesney Cemetery
    • Note: The GPS coordinates that we are using for the Chesney Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Old Flat Creek Cemetery
    (2 miles [3.2 km] to the south)
    • Jump to our Gazetteer entry for the Old Flat Creek Cemetery
    • Note: The GPS coordinates that we are using for the Old Flat Creek Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Rockydale Cemetery
    (2 miles [3.2 km] to the south)
    • Jump to our Gazetteer entry for the Rockydale Cemetery
    • Note: The GPS coordinates that we are using for the Rockydale Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Archer Cemetery
    (2 miles [3.2 km] to the northeast)
    • Jump to our Gazetteer entry for the Archer Cemetery
    • Note: The GPS coordinates that we are using for the Archer Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Wyrick Cemetery
    (2 miles [3.2 km] to the north)
    • Jump to our Gazetteer entry for the Wyrick Cemetery
    • Note: The GPS coordinates that we are using for the Wyrick Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Sharp Cemetery
    (2 miles [3.2 km] to the north)
    • Jump to our Gazetteer entry for the Sharp Cemetery
    • Note: The GPS coordinates that we are using for the Sharp Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Pleasant Grove Cemetery
    (2 miles [3.2 km] to the northwest)
    • Jump to our Gazetteer entry for the Pleasant Grove Cemetery
    • Note: The GPS coordinates that we are using for the Pleasant Grove Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • McBee Cemetery
    (3 miles [4.8 km] to the southeast)
    • Jump to our Gazetteer entry for the McBee Cemetery
    • Note: The GPS coordinates that we are using for the McBee Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Continue List   (1295 more) ...
    • Mynatt Cemetery
      (3 miles [4.8 km] to the southeast)
      • Jump to our Gazetteer entry for the Mynatt Cemetery
      • Note: The GPS coordinates that we are using for the Mynatt Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Cox Cemetery
      (3 miles [4.8 km] to the northwest)
      • Jump to our Gazetteer entry for the Cox Cemetery
      • Note: The GPS coordinates that we are using for the Cox Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Johnson Cemetery
      (3 miles [4.8 km] to the northwest)
      • Jump to our Gazetteer entry for the Johnson Cemetery
      • Note: The GPS coordinates that we are using for the Johnson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

While we didn't find Plainview in the Atlas, the following 1895 communities would have been found near the current location of Plainview.

These communities are listed based on their distance from Plainview, with the one closest to Plainview listed first.

  • Corryton
    (Less than 2 miles to the south)
  • Graveston
    (2 miles [3.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for Graveston have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Graveston
    • Graveston is located in Knox County
  • House Mountain ‑ Historic
    (2 miles [3.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for House Mountain have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for House Mountain
    • House Mountain is located in Knox County
  • Luttrell
    (3 miles [4.8 km] to the northeast)
    • Jump to our Gazetteer entry for Luttrell
    • Luttrell is located in Union County
    • Population from the 2020 Census: 1,088 people
  • Maynardville
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for Maynardville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Maynardville
    • Maynardville is located in Union County
    • Population from the 2020 Census: 2,452 people
    • Jump to TripAdvisor's Tourism page for Maynardville <2>
  • Paulette
    (5 miles [8 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for Paulette. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Paulette
    • Paulette is located in Union County
  • Maloneyville
    (6 miles [9.7 km] to the south)
    • Jump to our Gazetteer entry for Maloneyville
    • Maloneyville is located in Knox County
  • Skaggston
    (6 miles [9.7 km] to the south)
    • Jump to our Gazetteer entry for Skaggston
    • Skaggston is located in Knox County
  • Lea Springs
    (6 miles [9.7 km] to the east)
    • Note: We haven't been able to verify our GPS coordinates for Lea Springs. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Lea Springs
    • Lea Springs is located in Grainger County
  • Mynatt
    (7 miles [11.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Mynatt have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mynatt
    • Mynatt is located in Knox County
  • Maples ‑ Historic
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for Maples have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Maples
    • Maples is located in Grainger County
  • Gabe ‑ Historic
    (7 miles [11.3 km] to the west)
    • Note: The GPS coordinates that we are using for Gabe have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gabe
    • Gabe is located in Union County
  • Continue List   (17 more) ...
    • Preston ‑ Historic
      (8 miles [12.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for Preston have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Preston
      • Preston is located in Knox County
    • Mascot
      (8 miles [12.9 km] to the south)
      • Note: The GPS coordinates that we are using for Mascot have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mascot
      • Mascot is located in Knox County
      • Population from the 2010 Census: 2,411 people
    • Powder Springs
      (8 miles [12.9 km] to the northeast)
      • Note: The GPS coordinates that we are using for Powder Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Powder Springs
      • Powder Springs is located in Grainger County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Plainview. See our List of 1890's Communities around Plainview.

Newspapers Published in Plainview ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 9 newspapers that have been published in the area around Plainview.

Although we're unaware of any newspapers that were published in the immediate area of Plainview, there are papers which were published within 13 miles [20.9 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Plainview.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Plainview:

Unfortunately, we don't know of a website for Plainview. If you can help, please contact us through our Feedback Page.

The official website for Union County: www.unioncountytn.org/

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Plainview, please let us know so that we can improve our accuracy.
<6>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Plainview) to Point B.Our distance measurements begin at a specific point in Plainview. The point we use is located at these GPS coordinates - Latitude: 36.1810, Longitude: -83.7937       In this case, the coordinates for Plainview have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 29 Apr 2025