|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that McLemoresville had a population of 151 people in 1895 with a post office and no railroad service. In 2020, McLemoresville had a population of 326 people.
The following communities are listed based on their distance from McLemoresville, with the one closest to McLemoresville listed first.
- Trezevant
(3 miles [4.8 km] to the northwest)
- Atwood
(5 miles [8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Atwood. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Atwood
- Atwood is located in Carroll County
- Population from the 2020 Census: 915 people
- Google driving directions:
- From your current location to Atwood
- From McLemoresville to Atwood
- Whitthorne
(6 miles [9.7 km] to the southwest)
- Leach
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Leach have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leach
- Leach is located in Carroll County
- Huntingdon
(8 miles [12.9 km] to the east)
- Christmasville
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Christmasville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Christmasville
- Christmasville is located in Carroll County
- Hico
(8 miles [12.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Hico. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hico
- Hico is located in Carroll County
- Google driving directions:
- From your current location to Hico
- From McLemoresville to Hico
- Gann
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Gann have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gann
- Gann is located in Gibson County
- Lavinia
(10 miles [16.1 km] to the southwest)
- Milan
(11 miles [17.7 km] to the southwest)
- Cedar Grove
(11 miles [17.7 km] to the south)
- McKenzie
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for McKenzie have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McKenzie
- McKenzie is located in Carroll County
- Population from the 2020 Census: 5,303 people
- Jump to TripAdvisor's Tourism page for McKenzie <2>
- McHaney ‑ Historic
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for McHaney have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McHaney
- McHaney is located in Henderson County
- Pillowville
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Pillowville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pillowville
- Pillowville is located in Weakley County
- Estimated population in 2014: 1,625 people
- Rosser
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Rosser have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rosser
- Rosser is located in Carroll County
- Spain ‑ Historic
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Spain have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spain
- Spain is located in Henderson County
- Clarksburg
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Clarksburg have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarksburg
- Clarksburg is located in Carroll County
- Population from the 2020 Census: 376 people
- Idlewild
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Idlewild have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Idlewild
- Idlewild is located in Gibson County
- West
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for West have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West
- West is located in Gibson County
- Bradford
(14 miles [22.5 km] to the northwest)
- Law
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Law have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Law
- Law is located in Henderson County
- Gleason
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Gleason have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gleason
- Gleason is located in Weakley County
- Population from the 2020 Census: 1,369 people
- Jump to TripAdvisor's Tourism page for Gleason <2>
- Gibson
(16 miles [25.7 km] to the southwest)
- Medina
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Medina have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Medina
- Medina is located in Gibson County
- Population from the 2020 Census: 4,379 people
- Jump to TripAdvisor's Tourism page for Medina <2>
- Spring Creek
(16 miles [25.7 km] to the south)
- Atkins ‑ Historic
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Atkins have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Atkins
- Atkins is located in Henderson County
- Estimated population in 2014: 13,664 people
- Buena Vista
(16 miles [25.7 km] to the east)
- Carnsville ‑ Historic
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Carnsville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carnsville
- Carnsville is located in Carroll County
- Mixie
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Mixie have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mixie
- Mixie is located in Carroll County
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about McLemoresville, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|