Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find McDaniel in the Atlas, the following communities of the 1890's would have been found near the current location of McDaniel. The following communities are listed based on their distance, with the one closest to McDaniel listed first.
- Arrington
(2 miles [3.2 km] to the north)
- Triune
(2 miles [3.2 km] to the northeast)
- Triune is located in Williamson County
- Jump to our Gazetteer entry for Triune
- Arno
(3 miles [4.8 km] to the southwest)
- Arno is located in Williamson County
- Jump to our Gazetteer entry for Arno
- College Grove
(3 miles [4.8 km] to the south)
- Peytonsville
(4 miles [6.4 km] to the west)
- Peytonsville is located in Williamson County
- Jump to our Gazetteer entry for Peytonsville
- Patterson
(4 miles [6.4 km] to the east)
- Patterson is located in Rutherford County
- Jump to our Gazetteer entry for Patterson
- Allisona
(5 miles [8 km] to the south)
- Allisona is located in Rutherford County
- Jump to our Gazetteer entry for Allisona
- Eagleville
(6 miles [9.7 km] to the south)
- Almaville
(6 miles [9.7 km] to the east)
- Almaville is located in Rutherford County
- Jump to our Gazetteer entry for Almaville
- Bethesda
(7 miles [11.3 km] to the southwest)
- Bethesda is located in Williamson County
- Jump to our Gazetteer entry for Bethesda
- Clovercroft
(7 miles [11.3 km] to the northwest)
- Clovercroft is located in Williamson County
- Jump to our Gazetteer entry for Clovercroft
- Harpeth
(8 miles [12.9 km] to the west)
- Harpeth is located in Williamson County
- Jump to our Gazetteer entry for Harpeth
- Snell ‑ Historic
(8 miles [12.9 km] to the east)
- Snell is located in Rutherford County
- Jump to our Gazetteer entry for Snell
- Estimated population in 2014: 1,361 people
- Rocky Fork
(8 miles [12.9 km] to the northeast)
- Rocky Fork is located in Rutherford County
- Jump to our Gazetteer entry for Rocky Fork
- Nolensville
(8 miles [12.9 km] to the north)
- Duplex
(9 miles [14.5 km] to the southwest)
- Duplex is located in Williamson County
- Jump to our Gazetteer entry for Duplex
- Holts Corner
(9 miles [14.5 km] to the south)
- Holts Corner is located in Marshall County
- Jump to our Gazetteer entry for Holts Corner
- Beasley
(10 miles [16.1 km] to the south)
- Beasley is located in Marshall County
- Jump to our Gazetteer entry for Beasley
- Rockvale
(10 miles [16.1 km] to the southeast)
- Carpenters ‑ Historic
(10 miles [16.1 km] to the northwest)
- Carpenters is located in Williamson County
- Jump to our Gazetteer entry for Carpenters
- Versailles
(11 miles [17.7 km] to the southeast)
- Versailles is located in Rutherford County
- Jump to our Gazetteer entry for Versailles
- Franklin
(11 miles [17.7 km] to the northwest)
- West Harpeth
(11 miles [17.7 km] to the west)
- West Harpeth is located in Williamson County
- Jump to our Gazetteer entry for West Harpeth
- Thompson's Station
(12 miles [19.3 km] to the west)
- Thompson's Station is located in Williamson County
- Jump to our Gazetteer entry for Thompson's Station
- Population from the 2020 Census: 6,973 people
- Former name for Thompson's Station:
- Littlebury
- Jump to TripAdvisor's Tourism page for Thompson's Station <2>
- Thick
(12 miles [19.3 km] to the south)
- Thick is located in Marshall County
- Jump to our Gazetteer entry for Thick
- Rover
(12 miles [19.3 km] to the southeast)
- Rover is located in Bedford County
- Jump to our Gazetteer entry for Rover
- Brentwood
(12 miles [19.3 km] to the northwest)
- Overall
(12 miles [19.3 km] to the east)
- Overall is located in Rutherford County
- Jump to our Gazetteer entry for Overall
- Callender ‑ Historic
(12 miles [19.3 km] to the northwest)
- Callender is located in Williamson County
- Jump to our Gazetteer entry for Callender
- Wrencoe
(12 miles [19.3 km] to the north)
- Wrencoe is located in Davidson County
- Jump to our Gazetteer entry for Wrencoe
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about McDaniel, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |