Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Lamb in the Atlas, the following communities of the 1890's would have been found near the current location of Lamb. The following communities are listed based on their distance, with the one closest to Lamb listed first.
- Smyrna
(2 miles [3.2 km] to the northwest)- Jump to our Gazetteer entry for Smyrna
- Smyrna is located in Rutherford County
- Population from the 2020 Census: 53,185 people
- Jump to TripAdvisor's Tourism page for Smyrna <2>
- Rocky Fork
(5 miles [8 km] to the west)- Note: The GPS coordinates that we are using for Rocky Fork have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rocky Fork
- Rocky Fork is located in Rutherford County
- Walterhill
(6 miles [9.7 km] to the east)- Note: We haven't been able to verify our GPS coordinates for Walterhill. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Walterhill
- Walterhill is located in Rutherford County
- La Vergne
(6 miles [9.7 km] to the northwest)- Jump to our Gazetteer entry for La Vergne
- La Vergne is located in Rutherford County
- Population from the 2020 Census: 35,646 people
- Jump to TripAdvisor's Tourism page for La Vergne <2>
- Almaville
(7 miles [11.3 km] to the southwest) - Snell ‑ Historic
(7 miles [11.3 km] to the south) - Murfreesboro
(8 miles [12.9 km] to the southeast)- Jump to our Gazetteer entry for Murfreesboro
- Murfreesboro is located in Rutherford County
- Population from the 2020 Census: 150,757 people
- Jump to TripAdvisor's Tourism page for Murfreesboro <2>
- Kimbro
(8 miles [12.9 km] to the northwest) - Overall
(9 miles [14.5 km] to the south) - Compton
(9 miles [14.5 km] to the east) - Vesta
(9 miles [14.5 km] to the northeast) - Brooklin
(9 miles [14.5 km] to the northwest) - Nolensville
(9 miles [14.5 km] to the west)- Note: We haven't been able to verify our GPS coordinates for Nolensville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Nolensville
- Nolensville is located in Williamson County
- Population from the 2020 Census: 11,145 people
- Jump to TripAdvisor's Tourism page for Nolensville <2>
- Patterson
(10 miles [16.1 km] to the southwest) - Mount View
(10 miles [16.1 km] to the northwest)- Note: The GPS coordinates that we are using for Mount View have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount View
- Mount View is located in Davidson County
- Triune
(11 miles [17.7 km] to the southwest) - Couchville
(11 miles [17.7 km] to the north)- Note: The GPS coordinates that we are using for Couchville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Couchville
- Couchville is located in Davidson County
- Rural Hill
(11 miles [17.7 km] to the north)- Note: We haven't been able to verify our GPS coordinates for Rural Hill. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rural Hill
- Rural Hill is located in Wilson County
- Sharpsville
(12 miles [19.3 km] to the east)- Note: The GPS coordinates that we are using for Sharpsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sharpsville
- Sharpsville is located in Rutherford County
- Antioch
(12 miles [19.3 km] to the northwest)- Note: The GPS coordinates that we are using for Antioch have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Antioch
- Antioch is located in Davidson County
- Jump to TripAdvisor's Tourism page for Antioch <2>
- Wrencoe
(12 miles [19.3 km] to the west) - Arrington
(13 miles [20.9 km] to the southwest)- Jump to our Gazetteer entry for Arrington
- Arrington is located in Williamson County
- Jump to TripAdvisor's Tourism page for Arrington <2>
- Rockvale
(13 miles [20.9 km] to the south)- Note: The GPS coordinates that we are using for Rockvale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockvale
- Rockvale is located in Rutherford County
- Jump to TripAdvisor's Tourism page for Rockvale <2>
- Crescent
(13 miles [20.9 km] to the south) - Dillton
(13 miles [20.9 km] to the southeast)- Jump to our Gazetteer entry for Dillton
- Dillton is located in Rutherford County
- Cainsville
(13 miles [20.9 km] to the east)- Note: We haven't been able to verify our GPS coordinates for Cainsville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Cainsville
- Cainsville is located in Wilson County
- Una
(13 miles [20.9 km] to the northwest)
Off-the-Road Links ...
The official website for Rutherford County: www.rutherfordcounty.org/
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Lamb, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |