Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Kirkland in the Atlas, the following communities of the 1890's would have been found near the current location of Kirkland. The following communities are listed based on their distance, with the one closest to Kirkland listed first.
- College Grove
(Less than 2 miles to the southwest)
- Allisona
(3 miles [4.8 km] to the southwest)
- Allisona is located in Rutherford County
- Jump to our Gazetteer entry for Allisona
- Patterson
(3 miles [4.8 km] to the east)
- Patterson is located in Rutherford County
- Jump to our Gazetteer entry for Patterson
- Triune
(3 miles [4.8 km] to the north)
- Triune is located in Williamson County
- Jump to our Gazetteer entry for Triune
- Eagleville
(4 miles [6.4 km] to the south)
- Arrington
(4 miles [6.4 km] to the northwest)
- Arno
(4 miles [6.4 km] to the west)
- Arno is located in Williamson County
- Jump to our Gazetteer entry for Arno
- Almaville
(6 miles [9.7 km] to the northeast)
- Almaville is located in Rutherford County
- Jump to our Gazetteer entry for Almaville
- Peytonsville
(6 miles [9.7 km] to the west)
- Peytonsville is located in Williamson County
- Jump to our Gazetteer entry for Peytonsville
- Bethesda
(7 miles [11.3 km] to the southwest)
- Bethesda is located in Williamson County
- Jump to our Gazetteer entry for Bethesda
- Snell ‑ Historic
(7 miles [11.3 km] to the east)
- Snell is located in Rutherford County
- Jump to our Gazetteer entry for Snell
- Estimated population in 2014: 1,361 people
- Holts Corner
(8 miles [12.9 km] to the south)
- Holts Corner is located in Marshall County
- Jump to our Gazetteer entry for Holts Corner
- Beasley
(8 miles [12.9 km] to the south)
- Beasley is located in Marshall County
- Jump to our Gazetteer entry for Beasley
- Versailles
(8 miles [12.9 km] to the southeast)
- Versailles is located in Rutherford County
- Jump to our Gazetteer entry for Versailles
- Rockvale
(8 miles [12.9 km] to the southeast)
- Rover
(9 miles [14.5 km] to the south)
- Rover is located in Bedford County
- Jump to our Gazetteer entry for Rover
- Rocky Fork
(9 miles [14.5 km] to the northeast)
- Rocky Fork is located in Rutherford County
- Jump to our Gazetteer entry for Rocky Fork
- Clovercroft
(9 miles [14.5 km] to the northwest)
- Clovercroft is located in Williamson County
- Jump to our Gazetteer entry for Clovercroft
- Duplex
(10 miles [16.1 km] to the southwest)
- Duplex is located in Williamson County
- Jump to our Gazetteer entry for Duplex
- Thick
(10 miles [16.1 km] to the south)
- Thick is located in Marshall County
- Jump to our Gazetteer entry for Thick
- Link
(10 miles [16.1 km] to the southeast)
- Link is located in Rutherford County
- Jump to our Gazetteer entry for Link
- Overall
(10 miles [16.1 km] to the east)
- Overall is located in Rutherford County
- Jump to our Gazetteer entry for Overall
- Nolensville
(10 miles [16.1 km] to the north)
- Harpeth
(10 miles [16.1 km] to the west)
- Harpeth is located in Williamson County
- Jump to our Gazetteer entry for Harpeth
- Chapel Hill
(12 miles [19.3 km] to the south)
- Crescent
(12 miles [19.3 km] to the east)
- Crescent is located in Rutherford County
- Jump to our Gazetteer entry for Crescent
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Kirkland, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |