TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Jonesborough. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Jonesborough.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Jonesborough - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 33 communities listed:

Afton
(16 miles [25.7 km] to the southwest)
- Jump to our Gazetteer entry for Afton
- Afton is located in Greene County
- Jump to TripAdvisor's Tourism page for Afton <2>
- Google driving directions:
- From your current location to Afton
- From Jonesborough to Afton
Baileyton
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Baileyton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Baileyton
- Baileyton is located in Greene County
- Population from the 2020 Census: 456 people
- Jump to TripAdvisor's Tourism page for Baileyton <2>
Bakersville
(26 miles [41.8 km] to the southeast)
- Jump to our Gazetteer entry for Bakersville
- Bakersville is located in Mitchell County (NC)
- Population from the 2020 Census: 441 people
- Jump to TripAdvisor's Tourism page for Bakersville <2>
- Google driving directions:
- From your current location to Bakersville
- From Jonesborough to Bakersville
Blountville
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Blountville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blountville
- Blountville is located in Sullivan County
- Population from the 2010 Census: 3,074 people
- Jump to TripAdvisor's Tourism page for Blountville <2>
Bluff City
(16 miles [25.7 km] to the northeast)
- Jump to our Gazetteer entry for Bluff City
- Bluff City is located in Sullivan County
- Population from the 2020 Census: 1,672 people
- Former name for Bluff City:
- Zollicoffer
- Jump to TripAdvisor's Tourism page for Bluff City <2>
- Google driving directions:
- From your current location to Bluff City
- From Jonesborough to Bluff City
Bristol
(26 miles [41.8 km] to the northeast)
- Jump to our Gazetteer entry for Bristol
- Bristol is located in Sullivan County
- Population from the 2020 Census: 27,142 people
- Jump to TripAdvisor's Tourism page for Bristol <2>
- Google driving directions:
- From your current location to Bristol
- From Jonesborough to Bristol
Burnsville
(27 miles [43.5 km] to the south)
- Jump to our Gazetteer entry for Burnsville
- Burnsville is located in Yancey County (NC)
- Population from the 2020 Census: 1,643 people
- Jump to TripAdvisor's Tourism page for Burnsville <2>
- Google driving directions:
- From your current location to Burnsville
- From Jonesborough to Burnsville
Butler
(25 miles [40.2 km] to the east)
- Jump to our Gazetteer entry for Butler
- Butler is located in Johnson County
- Jump to TripAdvisor's Tourism page for Butler <2>
- Google driving directions:
- From your current location to Butler
- From Jonesborough to Butler
Chuckey
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Chuckey have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chuckey
- Chuckey is located in Greene County
- Jump to TripAdvisor's Tourism page for Chuckey <2>
Church Hill
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Church Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Church Hill
- Church Hill is located in Hawkins County
- Population from the 2020 Census: 6,643 people
- Jump to TripAdvisor's Tourism page for Church Hill <2>
Collingwood
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Collingwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Collingwood
- Collingwood is located in Sullivan County
- Estimated population in 2014: 48,655 people
- Jump to TripAdvisor's Tourism page for Collingwood <2>
Colonial Heights
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Colonial Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Colonial Heights
- Colonial Heights is located in Sullivan County
- Population from the 2010 Census: 6,934 people
- Jump to TripAdvisor's Tourism page for Colonial Heights <2>
Elizabethton
(14 miles [22.5 km] to the east)
- Jump to our Gazetteer entry for Elizabethton
- Elizabethton is located in Carter County
- Population from the 2020 Census: 13,479 people
- Jump to TripAdvisor's Tourism page for Elizabethton <2>
- Google driving directions:
- From your current location to Elizabethton
- From Jonesborough to Elizabethton
Elk Park
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Elk Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elk Park
- Elk Park is located in Avery County (NC)
- Population from the 2020 Census: 450 people
- Jump to TripAdvisor's Tourism page for Elk Park <2>
Erwin
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Erwin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Erwin
- Erwin is located in Unicoi County
- Population from the 2020 Census: 5,854 people
- Jump to TripAdvisor's Tourism page for Erwin <2>
Fall Branch
(11 miles [17.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Fall Branch. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Fall Branch
- Fall Branch is located in Washington County
- Population from the 2010 Census: 1,291 people
- Jump to TripAdvisor's Tourism page for Fall Branch <2>
- Google driving directions:
- From your current location to Fall Branch
- From Jonesborough to Fall Branch
Gray
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Gray have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gray
- Gray is located in Washington County
- Jump to TripAdvisor's Tourism page for Gray <2>
Green Mountain
(23 miles [37 km] to the southeast)
- Jump to our Gazetteer entry for Green Mountain
- Green Mountain is located in Yancey County (NC)
- Jump to TripAdvisor's Tourism page for Green Mountain <2>
- Google driving directions:
- From your current location to Green Mountain
- From Jonesborough to Green Mountain
Greeneville
(21 miles [33.8 km] to the southwest)
- Jump to our Gazetteer entry for Greeneville
- Greeneville is located in Greene County
- Population from the 2020 Census: 14,940 people
- Jump to TripAdvisor's Tourism page for Greeneville <2>
- Google driving directions:
- From your current location to Greeneville
- From Jonesborough to Greeneville
Hampton
(17 miles [27.4 km] to the east)
- Jump to our Gazetteer entry for Hampton
- Hampton is located in Carter County
- Former name for Hampton:
- Allentown
- Jump to TripAdvisor's Tourism page for Hampton <2>
- Google driving directions:
- From your current location to Hampton
- From Jonesborough to Hampton
Johnson City
(6 miles [9.7 km] to the northeast)
- Jump to our Gazetteer entry for Johnson City
- Johnson City is located in Washington County
- Population from the 2020 Census: 67,142 people
- Former names for Johnson City:
- Blue Plum Station
- Haynesville
- Johnsons Depot
- Johnsons Tank
- Jump to TripAdvisor's Tourism page for Johnson City <2>
- Google driving directions:
- From your current location to Johnson City
- From Jonesborough to Johnson City
Kingsport
(17 miles [27.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Kingsport. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Kingsport
- Kingsport is located in Sullivan County
- Population from the 2020 Census: 54,112 people
- Jump to TripAdvisor's Tourism page for Kingsport <2>
- Google driving directions:
- From your current location to Kingsport
- From Jonesborough to Kingsport
Limestone
(9 miles [14.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Limestone. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Limestone
- Limestone is located in Washington County
- Jump to TripAdvisor's Tourism page for Limestone <2>
- Google driving directions:
- From your current location to Limestone
- From Jonesborough to Limestone
Micaville
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Micaville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Micaville
- Micaville is located in Yancey County (NC)
- Jump to TripAdvisor's Tourism page for Micaville <2>
Midway
(30 miles [48.3 km] to the west)
- Jump to our Gazetteer entry for Midway
- Midway is located in Greene County
- Jump to TripAdvisor's Tourism page for Midway <2>
- Google driving directions:
- From your current location to Midway
- From Jonesborough to Midway
Mosheim
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Mosheim have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mosheim
- Mosheim is located in Greene County
- Population from the 2020 Census: 2,357 people
- Jump to TripAdvisor's Tourism page for Mosheim <2>
Mount Carmel
(20 miles [32.2 km] to the northwest)
- Jump to our Gazetteer entry for Mount Carmel
- Mount Carmel is located in Hawkins County
- Population from the 2020 Census: 5,255 people
- Jump to TripAdvisor's Tourism page for Mount Carmel <2>
- Google driving directions:
- From your current location to Mount Carmel
- From Jonesborough to Mount Carmel
Piney Flats
(12 miles [19.3 km] to the northeast)
- Jump to our Gazetteer entry for Piney Flats
- Piney Flats is located in Sullivan County
- Jump to TripAdvisor's Tourism page for Piney Flats <2>
- Google driving directions:
- From your current location to Piney Flats
- From Jonesborough to Piney Flats
Roan Mountain
(23 miles [37 km] to the east)
- Jump to our Gazetteer entry for Roan Mountain
- Roan Mountain is located in Carter County
- Population from the 2010 Census: 1,360 people
- Jump to TripAdvisor's Tourism page for Roan Mountain <2>
- Google driving directions:
- From your current location to Roan Mountain
- From Jonesborough to Roan Mountain
Rogersville
(30 miles [48.3 km] to the west)
- Jump to our Gazetteer entry for Rogersville
- Rogersville is located in Hawkins County
- Population from the 2020 Census: 4,364 people
- Jump to TripAdvisor's Tourism page for Rogersville <2>
- Google driving directions:
- From your current location to Rogersville
- From Jonesborough to Rogersville
Surgoinsville
(24 miles [38.6 km] to the northwest)
- Jump to our Gazetteer entry for Surgoinsville
- Surgoinsville is located in Hawkins County
- Population from the 2020 Census: 1,754 people
- Jump to TripAdvisor's Tourism page for Surgoinsville <2>
- Google driving directions:
- From your current location to Surgoinsville
- From Jonesborough to Surgoinsville
Telford
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for Telford
- Telford is located in Washington County
- Population from the 2010 Census: 921 people
- Jump to TripAdvisor's Tourism page for Telford <2>
- Google driving directions:
- From your current location to Telford
- From Jonesborough to Telford
Unicoi
(9 miles [14.5 km] to the southeast)
- Jump to our Gazetteer entry for Unicoi
- Unicoi is located in Unicoi County
- Population from the 2020 Census: 3,579 people
- Jump to TripAdvisor's Tourism page for Unicoi <2>
- Google driving directions:
- From your current location to Unicoi
- From Jonesborough to Unicoi

Off-the-Road Links ...

Unfortunately, we don't know of an official website for Jonesborough. If you can help, please contact us through our Feedback Page.

The official website for Washington County: www.washingtoncountytn.com/

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>	Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Jonesborough) to Point B.Our distance measurements begin at a specific point in Jonesborough. The point we use is located at these GPS coordinates - Latitude: 36.2936, Longitude: -82.4749
<2>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>	An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.