RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Washington County >> Harmony >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Harmony (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Harmony. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Harmony is located in Washington County.

To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Washington County: Carter, Greene, Hawkins, Sullivan & Unicoi.

Below are the counties that are near Harmony. For each of these counties, we show a sample of those communities that are closest to Harmony:

  • Washington County     (The home county of Harmony)
    • The following are listed by their distance from Harmony, with the one closest to Harmony listed first.
    • Wheelocktown ‑ Historic
      (Less than 2 miles to the east)
    • Fall Branch
      (3 miles [4.8 km] to the northwest)
    • Locust Mount
      (3 miles [4.8 km] to the south)
    • Gray
      (5 miles [8 km] to the east)
      • Note: The GPS coordinates that we are using for Gray have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gray
      • Gray is located in Washington County
      • Jump to TripAdvisor's Tourism page for Gray <2>
    • Ducktown
      (5 miles [8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Ducktown have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ducktown
      • Ducktown is located in Washington County
      • Estimated population in 2014: 457 people
    • Spurgeon
      (6 miles [9.7 km] to the northeast)
    • Big Sandy
      (6 miles [9.7 km] to the south)
      • Note: The GPS coordinates that we are using for Big Sandy have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Big Sandy
      • Big Sandy is located in Washington County
      • Estimated population in 2014: 542 people
    • Bowmantown
      (6 miles [9.7 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Bowmantown. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Bowmantown
      • Bowmantown is located in Washington County
      • Population from the 2010 Census: 302 people
      • Google driving directions:
      • From your current location to Bowmantown
      • From Harmony to Bowmantown
    • Oak Grove
      (7 miles [11.3 km] to the east)
      • Note: The GPS coordinates that we are using for Oak Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oak Grove
      • Oak Grove is located in Washington County
    • Green Hill
      (8 miles [12.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Green Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Green Hill
      • Green Hill is located in Washington County
    • Jonesborough
      (8 miles [12.9 km] to the southeast)
    • Flourville
      (9 miles [14.5 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Flourville. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Flourville
      • Flourville is located in Washington County
      • Google driving directions:
      • From your current location to Flourville
      • From Harmony to Flourville
  • Carter County
    • The following are listed by their distance from Harmony, with the one closest to Harmony listed first.
    • Watauga
      (15 miles [24.1 km] to the east)
    • Pine Crest
      (15 miles [24.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Pine Crest have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pine Crest
      • Pine Crest is located in Carter County
    • Central
      (16 miles [25.7 km] to the east)
      • Note: The GPS coordinates that we are using for Central have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Central
      • Central is located in Carter County
    • Biltmore
      (18 miles [29 km] to the east)
    • Elizabethton
      (19 miles [30.6 km] to the east)
    • Gap Run
      (20 miles [32.2 km] to the southeast)
    • Hunter
      (22 miles [35.4 km] to the east)
      • Note: The GPS coordinates that we are using for Hunter have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hunter
      • Hunter is located in Carter County
    • Woodby Hill
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Woodby Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Woodby Hill
      • Woodby Hill is located in Carter County
      • Estimated population in 2014: 2,730 people
    • Hampton
      (23 miles [37 km] to the east)
    • Siam
      (23 miles [37 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Siam. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Siam
      • Siam is located in Carter County
      • Google driving directions:
      • From your current location to Siam
      • From Harmony to Siam
    • Tolley Town
      (23 miles [37 km] to the southeast)
      • Note: The GPS coordinates that we are using for Tolley Town have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tolley Town
      • Tolley Town is located in Carter County
    • Fish Springs
      (28 miles [45.1 km] to the east)
  • Greene County
    • The following are listed by their distance from Harmony, with the one closest to Harmony listed first.
    • Milburnton
      (7 miles [11.3 km] to the southwest)
    • Jearoldstown
      (7 miles [11.3 km] to the west)
    • Centersville
      (10 miles [16.1 km] to the southwest)
    • Rheatown
      (13 miles [20.9 km] to the southwest)
    • Baileyton
      (15 miles [24.1 km] to the west)
      • Note: The GPS coordinates that we are using for Baileyton have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Baileyton
      • Baileyton is located in Greene County
      • Population from the 2020 Census: 456 people
      • Jump to TripAdvisor's Tourism page for Baileyton <2>
    • Horse Creek
      (16 miles [25.7 km] to the south)
      • Note: The GPS coordinates that we are using for Horse Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Horse Creek
      • Horse Creek is located in Greene County
      • Estimated population in 2014: 284 people
    • Afton
      (16 miles [25.7 km] to the southwest)
    • Fairview
      (16 miles [25.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fairview
      • Fairview is located in Greene County
    • Bolton Estates
      (18 miles [29 km] to the southwest)
      • Note: The GPS coordinates that we are using for Bolton Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bolton Estates
      • Bolton Estates is located in Greene County
      • Estimated population in 2014: 5,152 people
    • Ottway
      (18 miles [29 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Ottway. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Ottway
      • Ottway is located in Greene County
      • Google driving directions:
      • From your current location to Ottway
      • From Harmony to Ottway
    • Pleasant View
      (18 miles [29 km] to the southwest)
      • Note: The GPS coordinates that we are using for Pleasant View have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pleasant View
      • Pleasant View is located in Greene County
      • Estimated population in 2014: 4,251 people
    • Tusculum
      (18 miles [29 km] to the southwest)
      • Note: The GPS coordinates that we are using for Tusculum have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tusculum
      • Tusculum is located in Greene County
      • Population from the 2020 Census: 2,669 people
  • Hancock County
    • The following are listed by their distance from Harmony, with the one closest to Harmony listed first.
    • Willis
      (28 miles [45.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Willis have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Willis
      • Willis is located in Hancock County
      • Estimated population in 2014: 387 people
    • Kyles Ford
      (29 miles [46.7 km] to the northwest)
  • Hawkins County
    • The following are listed by their distance from Harmony, with the one closest to Harmony listed first.
    • Chimneytop ‑ Historic
      (10 miles [16.1 km] to the west)
      • Note: The GPS coordinates that we are using for Chimneytop have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chimneytop
      • Chimneytop is located in Hawkins County
    • Rotherwood
      (11 miles [17.7 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Rotherwood. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Rotherwood
      • Rotherwood is located in Hawkins County
      • Google driving directions:
      • From your current location to Rotherwood
      • From Harmony to Rotherwood
    • Block City
      (11 miles [17.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Block City have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Block City
      • Block City is located in Hawkins County
    • Blossom
      (11 miles [17.7 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Blossom. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Blossom
      • Blossom is located in Hawkins County
      • Google driving directions:
      • From your current location to Blossom
      • From Harmony to Blossom
    • Church Hill
      (11 miles [17.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Church Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Church Hill
      • Church Hill is located in Hawkins County
      • Population from the 2020 Census: 6,643 people
      • Jump to TripAdvisor's Tourism page for Church Hill <2>
    • Green Village
      (11 miles [17.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Green Village have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Green Village
      • Green Village is located in Hawkins County
    • Mount Carmel
      (11 miles [17.7 km] to the northwest)
    • Solitude ‑ Historic
      (11 miles [17.7 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Solitude. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Solitude
      • Solitude is located in Hawkins County
      • Google driving directions:
      • From your current location to Solitude
      • From Harmony to Solitude
    • New Canton
      (13 miles [20.9 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for New Canton. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for New Canton
      • New Canton is located in Hawkins County
      • Google driving directions:
      • From your current location to New Canton
      • From Harmony to New Canton
    • Frisco
      (14 miles [22.5 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Frisco. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Frisco
      • Frisco is located in Hawkins County
      • Google driving directions:
      • From your current location to Frisco
      • From Harmony to Frisco
    • Waycross
      (14 miles [22.5 km] to the north)
      • Note: The GPS coordinates that we are using for Waycross have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Waycross
      • Waycross is located in Hawkins County
      • Estimated population in 2014: 4,091 people
    • Greenland
      (14 miles [22.5 km] to the northwest)
  • Johnson County
  • Sullivan County
    • The following are listed by their distance from Harmony, with the one closest to Harmony listed first.
    • Fordtown
      (5 miles [8 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Fordtown. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Fordtown
      • Fordtown is located in Sullivan County
      • Google driving directions:
      • From your current location to Fordtown
      • From Harmony to Fordtown
    • Kendrick Creek ‑ Historic
      (6 miles [9.7 km] to the northeast)
    • Colonial Heights
      (7 miles [11.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Colonial Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Colonial Heights
      • Colonial Heights is located in Sullivan County
      • Population from the 2010 Census: 6,934 people
      • Jump to TripAdvisor's Tourism page for Colonial Heights <2>
    • Blair Gap
      (7 miles [11.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Blair Gap have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blair Gap
      • Blair Gap is located in Sullivan County
      • Estimated population in 2014: 1,870 people
    • Beechwood Village
      (8 miles [12.9 km] to the north)
      • Note: The GPS coordinates that we are using for Beechwood Village have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beechwood Village
      • Beechwood Village is located in Sullivan County
    • Wahoo ‑ Historic
      (8 miles [12.9 km] to the northeast)
      • Note: The GPS coordinates that we are using for Wahoo have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wahoo
      • Wahoo is located in Sullivan County
    • Borden Village
      (9 miles [14.5 km] to the north)
      • Note: The GPS coordinates that we are using for Borden Village have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Borden Village
      • Borden Village is located in Sullivan County
    • Colby ‑ Historic
      (9 miles [14.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Colby have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Colby
      • Colby is located in Sullivan County
    • Kingsport
      (10 miles [16.1 km] to the north)
    • Cherokee Village
      (11 miles [17.7 km] to the north)
      • Note: The GPS coordinates that we are using for Cherokee Village have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cherokee Village
      • Cherokee Village is located in Sullivan County
    • Horace ‑ Historic
      (11 miles [17.7 km] to the north)
      • Note: The GPS coordinates that we are using for Horace have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Horace
      • Horace is located in Sullivan County
    • Beartown
      (12 miles [19.3 km] to the north)
  • Unicoi County
    • The following are listed by their distance from Harmony, with the one closest to Harmony listed first.
    • Bumpus Cove
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Bumpus Cove have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bumpus Cove
      • Bumpus Cove is located in Unicoi County
      • Estimated population in 2014: 729 people
    • Unicoi
      (18 miles [29 km] to the southeast)
    • Whispering Pines
      (18 miles [29 km] to the southeast)
    • Banner Hill
      (19 miles [30.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Banner Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Banner Hill
      • Banner Hill is located in Unicoi County
      • Population from the 2010 Census: 1,497 people
    • Erwin
      (19 miles [30.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Erwin have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Erwin
      • Erwin is located in Unicoi County
      • Population from the 2020 Census: 5,854 people
      • Jump to TripAdvisor's Tourism page for Erwin <2>
    • Indian Creek ‑ Historic
      (20 miles [32.2 km] to the south)
      • Note: The GPS coordinates that we are using for Indian Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Indian Creek
      • Indian Creek is located in Unicoi County
    • Ernestville
      (22 miles [35.4 km] to the south)
      • Note: The GPS coordinates that we are using for Ernestville have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ernestville
      • Ernestville is located in Unicoi County
      • Estimated population in 2014: 1,311 people
    • Limestone Cove
      (22 miles [35.4 km] to the southeast)
    • Clear Branch
      (23 miles [37 km] to the south)
    • Loganton ‑ Historic
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for Loganton have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Loganton
      • Loganton is located in Unicoi County
    • Flag Pond
      (26 miles [41.8 km] to the south)
  • Madison County (NC)
  • Mitchell County (NC)
    • The following are listed by their distance from Harmony, with the one closest to Harmony listed first.
    • Richlands
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Richlands have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Richlands
      • Richlands is located in Mitchell County (NC)
    • Bailey
      (27 miles [43.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Bailey have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bailey
      • Bailey is located in Mitchell County (NC)
    • Buladean
      (28 miles [45.1 km] to the southeast)
    • Relief
      (29 miles [46.7 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Relief. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Relief
      • Relief is located in Mitchell County (NC)
      • Google driving directions:
      • From your current location to Relief
      • From Harmony to Relief
    • Tipton Hill
      (29 miles [46.7 km] to the southeast)
    • Herrell ‑ Historic
      (30 miles [48.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Herrell have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Herrell
      • Herrell is located in Mitchell County (NC)
  • Yancey County (NC)
    • The following are listed by their distance from Harmony, with the one closest to Harmony listed first.
    • Sioux
      (28 miles [45.1 km] to the southeast)
    • Ramseytown
      (29 miles [46.7 km] to the southeast)

For an expanded list of the communities that are closest to Harmony, see our County-by-County Page for Harmony.

Cemeteries Near Harmony ...

Below are cemeteries that are in the vicinity of Harmony.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Harmony covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Harmony, with the one closest to Harmony listed first.

  • Bacon Cemetery
    (Less than 2 miles to the southwest)
    • Jump to our Gazetteer entry for the Bacon Cemetery
    • Note: The GPS coordinates that we are using for the Bacon Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Harmony Cemetery
    (Less than 2 miles to the south)
    • Jump to our Gazetteer entry for the Harmony Cemetery
    • Note: The GPS coordinates that we are using for the Harmony Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Bacon Cemetery
    (Less than 2 miles to the southeast)
    • Jump to our Gazetteer entry for the Bacon Cemetery
    • Note: The GPS coordinates that we are using for the Bacon Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Logans Chapel Cemetery
    (Less than 2 miles to the west)
    • Jump to our Gazetteer entry for the Logans Chapel Cemetery
    • Note: The GPS coordinates that we are using for the Logans Chapel Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Mitchell Cemetery
    (Less than 2 miles to the southwest)
    • Jump to our Gazetteer entry for the Mitchell Cemetery
    • Note: The GPS coordinates that we are using for the Mitchell Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Dunham Cemetery
    (Less than 2 miles to the southeast)
    • Jump to our Gazetteer entry for the Dunham Cemetery
    • Note: The GPS coordinates that we are using for the Dunham Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Simmons Cemetery
    (Less than 2 miles to the north)
    • Jump to our Gazetteer entry for the Simmons Cemetery
    • Note: The GPS coordinates that we are using for the Simmons Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Bacon Cemetery
    (Less than 2 miles to the southeast)
    • Jump to our Gazetteer entry for the Bacon Cemetery
    • Note: The GPS coordinates that we are using for the Bacon Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Bethany Cemetery
    (Less than 2 miles to the east)
    • Jump to our Gazetteer entry for the Bethany Cemetery
    • Note: The GPS coordinates that we are using for the Bethany Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Fulkerson Cemetery
    (Less than 2 miles to the northwest)
    • Jump to our Gazetteer entry for the Fulkerson Cemetery
    • Note: The GPS coordinates that we are using for the Fulkerson Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Ford Cemetery
    (Less than 2 miles to the east)
    • Jump to our Gazetteer entry for the Ford Cemetery
    • Note: The GPS coordinates that we are using for the Ford Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Cox Cemetery
    (Less than 2 miles to the north)
    • Jump to our Gazetteer entry for the Cox Cemetery
    • Note: The GPS coordinates that we are using for the Cox Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Continue List   (937 more) ...
    • Kincheloe - Cox Cemetery
      (Less than 2 miles to the north)
      • Jump to our Gazetteer entry for the Kincheloe - Cox Cemetery
      • Note: The GPS coordinates that we are using for the Kincheloe - Cox Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Gibson Cemetery
      (Less than 2 miles to the northwest)
      • Jump to our Gazetteer entry for the Gibson Cemetery
      • Note: The GPS coordinates that we are using for the Gibson Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jackson Cemetery
      (Less than 2 miles to the west)
      • Jump to our Gazetteer entry for the Jackson Cemetery
      • Note: The GPS coordinates that we are using for the Jackson Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

The Rand McNally Atlas shows that in 1895, Harmony had a post office and no railroad service.

These communities are listed based on their distance from Harmony, with the one closest to Harmony listed first.

  • Meadowbrook
    (Less than 2 miles to the north)
    • Note: The GPS coordinates that we are using for Meadowbrook have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Meadowbrook
    • Meadowbrook is located in Washington County
  • Locust Mount
    (3 miles [4.8 km] to the south)
  • Slaughter ‑ Historic
    (3 miles [4.8 km] to the north)
    • Note: The GPS coordinates that we are using for Slaughter have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Slaughter
    • Slaughter is located in Sullivan County
  • Fall Branch
    (3 miles [4.8 km] to the northwest)
  • Christie ‑ Historic
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Christie have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Christie
    • Christie is located in Washington County
  • Cedar Lane
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Cedar Lane have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cedar Lane
    • Cedar Lane is located in Greene County
  • Cloverbottom ‑ Historic
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for Cloverbottom have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cloverbottom
    • Cloverbottom is located in Sullivan County
  • February
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for February have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for February
    • February is located in Washington County
  • Keebler Crossroads
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Keebler Crossroads have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Keebler Crossroads
    • Keebler Crossroads is located in Washington County
  • Fordtown
    (5 miles [8 km] to the northeast)
    • Note: We haven't been able to verify our GPS coordinates for Fordtown. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Fordtown
    • Fordtown is located in Sullivan County
    • Google driving directions:
    • From your current location to Fordtown
    • From Harmony to Fordtown
  • Lovelace
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Lovelace have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lovelace
    • Lovelace is located in Greene County
  • Bowmantown
    (6 miles [9.7 km] to the south)
    • Note: We haven't been able to verify our GPS coordinates for Bowmantown. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Bowmantown
    • Bowmantown is located in Washington County
    • Population from the 2010 Census: 302 people
    • Google driving directions:
    • From your current location to Bowmantown
    • From Harmony to Bowmantown
  • Continue List   (19 more) ...
    • Butterfly ‑ Historic
      (6 miles [9.7 km] to the north)
      • Note: The GPS coordinates that we are using for Butterfly have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Butterfly
      • Butterfly is located in Sullivan County
    • Kendrick Creek ‑ Historic
      (6 miles [9.7 km] to the northeast)
    • Harbour
      (6 miles [9.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Harbour have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harbour
      • Harbour is located in Sullivan County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Harmony. See our List of 1890's Communities around Harmony.

Newspapers Published in Harmony ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 14 newspapers that have been published in the area around Harmony.

Although we're unaware of any newspapers that were published in the immediate area of Harmony, there are papers which were published within 10 miles [16.1 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Harmony.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first visit the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Harmony:

Unfortunately, we don't know of a website for Harmony. If you can help, please contact us through our Feedback Page.

The official website for Washington County: www.washingtoncountytn.com/

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Harmony, please let us know so that we can improve our accuracy.
<5>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Harmony) to Point B.Our distance measurements begin at a specific point in Harmony. The point we use is located at these GPS coordinates - Latitude: 36.3950, Longitude: -82.5662       In this case, the coordinates for Harmony have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 29 Apr 2025