Welcome to Grandview Terrace ...
Grandview Terrace is located in Sullivan County<1>.
A typical abbreviation for Grandview Terrace: Grandview Ter. (or less commonly used: Grandview Terr.)
Grandview Terrace is 1,710 feet [521 m] above sea level.<2>.
Time Zone: Grandview Terrace lies in the Eastern Time Zone (EST/EDT) and observes daylight saving time
Area Codes for Grandview Terrace: 423 & 729<3>
Communities Also Named Grandview Terrace ...
Using our Gazetteer, we found another community named Grandview Terrace - it's located in Pennsylvania.
For more information, see our Tidbits & Trivia Page for Grandview Terrace.
Communities near Grandview Terrace ...
We have created a list of 10 communities that are near Grandview Terrace.
- Johnson City
(17 miles [27.4 km] to the southwest)
- Johnson City is located in Washington County
- Jump to our Gazetteer entry for Johnson City
- Population from the 2020 Census: 67,142 people
- Former names for Johnson City:
- Blue Plum Station
- Haynesville
- Johnsons Depot
- Johnsons Tank
- Jump to TripAdvisor's Tourism page for Johnson City <4>
- Collingwood
(5 miles [8 km] to the northwest)
- Bristol
(4 miles [6.4 km] to the north)
- East Ridge
(17 miles [27.4 km] to the southwest)
- East Ridge is located in Washington County
- Jump to our Gazetteer entry for East Ridge
- Estimated population in 2014: 21,317 people
- Elizabethton
(12 miles [19.3 km] to the south)
- Cross
(7 miles [11.3 km] to the west)
- Cross is located in Sullivan County
- Jump to our Gazetteer entry for Cross
- Estimated population in 2014: 11,330 people
- Mill Point
(11 miles [17.7 km] to the west)
- Mill Point is located in Sullivan County
- Jump to our Gazetteer entry for Mill Point
- Estimated population in 2014: 11,080 people
- Bloomingdale
(18 miles [29 km] to the west)
- Bloomingdale is located in Sullivan County
- Jump to our Gazetteer entry for Bloomingdale
- Population from the 2010 Census: 9,888 people
- Winchester
(12 miles [19.3 km] to the east)
- Winchester is located in Johnson County
- Jump to our Gazetteer entry for Winchester
- Estimated population in 2014: 8,547 people
- Colonial Heights
(18 miles [29 km] to the west)
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Grandview Terrace. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Grandview Terrace.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Grandview Terrace. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Grandview Terrace.
We also have a detailed list of newspapers that have been published in the area around Grandview Terrace. See our Newspapers Page for Grandview Terrace.
TripAdvisor Tourism Pages for Grandview Terrace ...
Looking for more information about Grandview Terrace? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.
While we are unaware of a Tourism page that is specific to Grandview Terrace, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Grandview Terrace.
Footnotes ...
| <1> | If you're interested in how the shape of Tennessee's counties, including Sullivan, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <2> | The elevation is an estimate for the area around Grandview Terrace - it will be higher in some places and lower in others. |
| <3> | When there's a risk of an area code running out of phone numbers, an 'Overlay Area Code' is created that has the same geographic boundaries as the existing area code. In this case, the 423 code has been Overlayed with the 729 area code. New phone numbers in the Grandview Terrace area will be assigned with one of these codes: 423 or 729. As a result, placing a call in the Grandview Terrace area will require 10-digit dialing (where you enter both the area code and then the phone number). |
| <4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |