RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Washington County >> Fairview >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Fairview (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Fairview. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most hospitals and doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Fairview is located in Washington County.

To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Washington County: Carter, Greene, Hawkins, Sullivan & Unicoi.

Below are the counties that are near Fairview. For each of these counties, we show a sample of those communities that are closest to Fairview:

  • Washington County     (The home county of Fairview)
    • The following are listed by their distance from Fairview, with the one closest to Fairview listed first.
    • Bowmantown
      (2 miles [3.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Bowmantown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bowmantown
      • Bowmantown is located in Washington County
      • Population from the 2010 Census: 302 people
    • Locust Mount
      (3 miles [4.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Locust Mount have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Locust Mount
      • Locust Mount is located in Washington County
    • Jonesborough
      (3 miles [4.8 km] to the southeast)
    • Big Sandy
      (3 miles [4.8 km] to the west)
      • Note: The GPS coordinates that we are using for Big Sandy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Big Sandy
      • Big Sandy is located in Washington County
      • Estimated population in 2014: 542 people
    • Green Hill
      (4 miles [6.4 km] to the east)
      • Note: The GPS coordinates that we are using for Green Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Green Hill
      • Green Hill is located in Washington County
    • Telford
      (4 miles [6.4 km] to the south)
    • Onks
      (5 miles [8 km] to the east)
      • Note: The GPS coordinates that we are using for Onks have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Onks
      • Onks is located in Washington County
      • Estimated population in 2014: 3,715 people
    • Harmony
      (5 miles [8 km] to the north)
      • Note: The GPS coordinates that we are using for Harmony have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harmony
      • Harmony is located in Washington County
    • Oakland
      (5 miles [8 km] to the southwest)
      • Jump to our Gazetteer entry for Oakland
      • Oakland is located in Washington County
    • Ducktown
      (5 miles [8 km] to the west)
      • Note: The GPS coordinates that we are using for Ducktown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ducktown
      • Ducktown is located in Washington County
      • Estimated population in 2014: 457 people
    • Midway
      (6 miles [9.7 km] to the east)
      • Note: The GPS coordinates that we are using for Midway have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Midway
      • Midway is located in Washington County
    • Wheelocktown ‑ Historic
      (6 miles [9.7 km] to the north)
      • Jump to our Gazetteer entry for Wheelocktown
      • Wheelocktown is located in Washington County
  • Carter County
    • The following are listed by their distance from Fairview, with the one closest to Fairview listed first.
    • Pine Crest
      (11 miles [17.7 km] to the east)
      • Note: The GPS coordinates that we are using for Pine Crest have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pine Crest
      • Pine Crest is located in Carter County
    • Central
      (13 miles [20.9 km] to the east)
      • Note: The GPS coordinates that we are using for Central have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Central
      • Central is located in Carter County
    • Watauga
      (13 miles [20.9 km] to the east)
      • Jump to our Gazetteer entry for Watauga
      • Watauga is located in Carter County
      • Population from the 2020 Census: 373 people
    • Biltmore
      (17 miles [27.4 km] to the east)
      • Jump to our Gazetteer entry for Biltmore
      • Biltmore is located in Carter County
    • Elizabethton
      (17 miles [27.4 km] to the east)
    • Gap Run
      (17 miles [27.4 km] to the east)
      • Jump to our Gazetteer entry for Gap Run
      • Gap Run is located in Carter County
    • Woodby Hill
      (18 miles [29 km] to the southeast)
      • Note: The GPS coordinates that we are using for Woodby Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Woodby Hill
      • Woodby Hill is located in Carter County
      • Estimated population in 2014: 2,730 people
    • Tolley Town
      (19 miles [30.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Tolley Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tolley Town
      • Tolley Town is located in Carter County
    • Hampton
      (20 miles [32.2 km] to the east)
    • Hunter
      (21 miles [33.8 km] to the east)
      • Note: The GPS coordinates that we are using for Hunter have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hunter
      • Hunter is located in Carter County
    • Roan Mountain
      (26 miles [41.8 km] to the east)
    • Burbank
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Burbank have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Burbank
      • Burbank is located in Carter County
  • Greene County
    • The following are listed by their distance from Fairview, with the one closest to Fairview listed first.
    • Milburnton
      (6 miles [9.7 km] to the west)
      • Jump to our Gazetteer entry for Milburnton
      • Milburnton is located in Greene County
    • Centersville
      (8 miles [12.9 km] to the west)
      • Jump to our Gazetteer entry for Centersville
      • Centersville is located in Greene County
    • Rheatown
      (10 miles [16.1 km] to the southwest)
      • Jump to our Gazetteer entry for Rheatown
      • Rheatown is located in Greene County
    • Jearoldstown
      (10 miles [16.1 km] to the west)
      • Jump to our Gazetteer entry for Jearoldstown
      • Jearoldstown is located in Greene County
    • Horse Creek
      (12 miles [19.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Horse Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Horse Creek
      • Horse Creek is located in Greene County
      • Estimated population in 2014: 284 people
    • Afton
      (14 miles [22.5 km] to the southwest)
    • Fairview
      (14 miles [22.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fairview
      • Fairview is located in Greene County
    • Henshaw ‑ Historic
      (15 miles [24.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Henshaw have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Henshaw
      • Henshaw is located in Greene County
      • Estimated population in 2014: 470 people
    • Pleasant View
      (15 miles [24.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Pleasant View have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pleasant View
      • Pleasant View is located in Greene County
      • Estimated population in 2014: 4,251 people
    • Tusculum
      (15 miles [24.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Tusculum have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tusculum
      • Tusculum is located in Greene County
      • Population from the 2020 Census: 2,669 people
    • Bolton Estates
      (16 miles [25.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Bolton Estates have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bolton Estates
      • Bolton Estates is located in Greene County
      • Estimated population in 2014: 5,152 people
    • Baileyton
      (16 miles [25.7 km] to the west)
      • Note: The GPS coordinates that we are using for Baileyton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Baileyton
      • Baileyton is located in Greene County
      • Population from the 2020 Census: 456 people
      • Jump to TripAdvisor's Tourism page for Baileyton <2>
  • Hawkins County
    • The following are listed by their distance from Fairview, with the one closest to Fairview listed first.
    • Blossom
      (15 miles [24.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Blossom have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blossom
      • Blossom is located in Hawkins County
    • Rotherwood
      (16 miles [25.7 km] to the north)
      • Note: The GPS coordinates that we are using for Rotherwood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rotherwood
      • Rotherwood is located in Hawkins County
    • Block City
      (17 miles [27.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Block City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Block City
      • Block City is located in Hawkins County
    • Church Hill
      (17 miles [27.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Church Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Church Hill
      • Church Hill is located in Hawkins County
      • Population from the 2020 Census: 6,643 people
      • Jump to TripAdvisor's Tourism page for Church Hill <2>
    • Green Village
      (17 miles [27.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Green Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Green Village
      • Green Village is located in Hawkins County
    • Mount Carmel
      (17 miles [27.4 km] to the northwest)
    • Solitude ‑ Historic
      (17 miles [27.4 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Solitude. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Solitude
      • Solitude is located in Hawkins County
    • Greenland
      (19 miles [30.6 km] to the northwest)
      • Jump to our Gazetteer entry for Greenland
      • Greenland is located in Hawkins County
    • Frisco
      (20 miles [32.2 km] to the north)
      • Note: The GPS coordinates that we are using for Frisco have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Frisco
      • Frisco is located in Hawkins County
    • Waycross
      (20 miles [32.2 km] to the north)
      • Note: The GPS coordinates that we are using for Waycross have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Waycross
      • Waycross is located in Hawkins County
      • Estimated population in 2014: 4,091 people
    • Surgoinsville
      (20 miles [32.2 km] to the northwest)
    • Kepler
      (20 miles [32.2 km] to the west)
      • Jump to our Gazetteer entry for Kepler
      • Kepler is located in Hawkins County
  • Johnson County
  • Sullivan County
    • The following are listed by their distance from Fairview, with the one closest to Fairview listed first.
    • Kendrick Creek ‑ Historic
      (10 miles [16.1 km] to the north)
      • Note: The GPS coordinates that we are using for Kendrick Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kendrick Creek
      • Kendrick Creek is located in Sullivan County
    • Colonial Heights
      (11 miles [17.7 km] to the north)
      • Note: The GPS coordinates that we are using for Colonial Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Colonial Heights
      • Colonial Heights is located in Sullivan County
      • Population from the 2010 Census: 6,934 people
      • Jump to TripAdvisor's Tourism page for Colonial Heights <2>
    • Blair Gap
      (12 miles [19.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Blair Gap have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blair Gap
      • Blair Gap is located in Sullivan County
      • Estimated population in 2014: 1,870 people
    • Beechwood Village
      (14 miles [22.5 km] to the north)
      • Note: The GPS coordinates that we are using for Beechwood Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beechwood Village
      • Beechwood Village is located in Sullivan County
    • Kingsport
      (14 miles [22.5 km] to the north)
      • Note: The GPS coordinates that we are using for Kingsport have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kingsport
      • Kingsport is located in Sullivan County
      • Population from the 2020 Census: 54,112 people
      • Jump to TripAdvisor's Tourism page for Kingsport <2>
    • Piney Flats
      (14 miles [22.5 km] to the northeast)
    • Borden Village
      (15 miles [24.1 km] to the north)
      • Note: The GPS coordinates that we are using for Borden Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Borden Village
      • Borden Village is located in Sullivan County
    • Cherokee Village
      (16 miles [25.7 km] to the north)
      • Note: The GPS coordinates that we are using for Cherokee Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cherokee Village
      • Cherokee Village is located in Sullivan County
    • Childress
      (16 miles [25.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Childress have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Childress
      • Childress is located in Sullivan County
    • Orebank
      (17 miles [27.4 km] to the north)
      • Jump to our Gazetteer entry for Orebank
      • Orebank is located in Sullivan County
    • Beartown
      (18 miles [29 km] to the north)
      • Jump to our Gazetteer entry for Beartown
      • Beartown is located in Sullivan County
    • Bloomingdale
      (18 miles [29 km] to the north)
      • Note: The GPS coordinates that we are using for Bloomingdale have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bloomingdale
      • Bloomingdale is located in Sullivan County
      • Population from the 2010 Census: 9,888 people
  • Unicoi County
    • The following are listed by their distance from Fairview, with the one closest to Fairview listed first.
    • Bumpus Cove
      (11 miles [17.7 km] to the south)
      • Note: The GPS coordinates that we are using for Bumpus Cove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bumpus Cove
      • Bumpus Cove is located in Unicoi County
      • Estimated population in 2014: 729 people
    • Banner Hill
      (13 miles [20.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Banner Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Banner Hill
      • Banner Hill is located in Unicoi County
      • Population from the 2010 Census: 1,497 people
    • Erwin
      (13 miles [20.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Erwin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Erwin
      • Erwin is located in Unicoi County
      • Population from the 2020 Census: 5,854 people
      • Jump to TripAdvisor's Tourism page for Erwin <2>
    • Unicoi
      (13 miles [20.9 km] to the southeast)
    • Whispering Pines
      (14 miles [22.5 km] to the east)
      • Jump to our Gazetteer entry for Whispering Pines
      • Whispering Pines is located in Unicoi County
    • Ernestville
      (16 miles [25.7 km] to the south)
      • Note: The GPS coordinates that we are using for Ernestville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ernestville
      • Ernestville is located in Unicoi County
      • Estimated population in 2014: 1,311 people
    • Clear Branch
      (17 miles [27.4 km] to the south)
      • Jump to our Gazetteer entry for Clear Branch
      • Clear Branch is located in Unicoi County
      • Former name for Clear Branch:
      • Kittyton
    • Flag Pond
      (20 miles [32.2 km] to the south)
      • Jump to our Gazetteer entry for Flag Pond
      • Flag Pond is located in Unicoi County
  • Madison County (NC)
    • The following are listed by their distance from Fairview, with the one closest to Fairview listed first.
    • Allegheny
      (23 miles [37 km] to the south)
      • Jump to our Gazetteer entry for Allegheny
      • Allegheny is located in Madison County (NC)
    • Cutshalltown
      (25 miles [40.2 km] to the south)
      • Jump to our Gazetteer entry for Cutshalltown
      • Cutshalltown is located in Madison County (NC)
    • White Rock
      (26 miles [41.8 km] to the south)
      • Jump to our Gazetteer entry for White Rock
      • White Rock is located in Madison County (NC)
    • Allenstand
      (26 miles [41.8 km] to the southwest)
      • Jump to our Gazetteer entry for Allenstand
      • Allenstand is located in Madison County (NC)
    • Chapel Hill
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Chapel Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chapel Hill
      • Chapel Hill is located in Madison County (NC)
    • Foster Creek
      (27 miles [43.5 km] to the south)
      • Jump to our Gazetteer entry for Foster Creek
      • Foster Creek is located in Madison County (NC)
    • Bethel
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for Bethel have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bethel
      • Bethel is located in Madison County (NC)
    • Hurricane
      (30 miles [48.3 km] to the southwest)
      • Jump to our Gazetteer entry for Hurricane
      • Hurricane is located in Madison County (NC)
  • Mitchell County (NC)
    • The following are listed by their distance from Fairview, with the one closest to Fairview listed first.
    • Richlands
      (19 miles [30.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Richlands have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Richlands
      • Richlands is located in Mitchell County (NC)
    • Bailey
      (21 miles [33.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Bailey have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bailey
      • Bailey is located in Mitchell County (NC)
    • Buladean
      (23 miles [37 km] to the southeast)
      • Jump to our Gazetteer entry for Buladean
      • Buladean is located in Mitchell County (NC)
    • Relief
      (23 miles [37 km] to the southeast)
      • Note: The GPS coordinates that we are using for Relief have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Relief
      • Relief is located in Mitchell County (NC)
    • Tipton Hill
      (24 miles [38.6 km] to the southeast)
      • Jump to our Gazetteer entry for Tipton Hill
      • Tipton Hill is located in Mitchell County (NC)
    • Red Hill
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Red Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Red Hill
      • Red Hill is located in Mitchell County (NC)
    • Bakersville
      (29 miles [46.7 km] to the southeast)
  • Yancey County (NC)
    • The following are listed by their distance from Fairview, with the one closest to Fairview listed first.
    • Sioux
      (22 miles [35.4 km] to the southeast)
      • Jump to our Gazetteer entry for Sioux
      • Sioux is located in Yancey County (NC)
    • Ramseytown
      (23 miles [37 km] to the southeast)
      • Jump to our Gazetteer entry for Ramseytown
      • Ramseytown is located in Yancey County (NC)
    • Higgins
      (25 miles [40.2 km] to the south)
      • Note: The GPS coordinates that we are using for Higgins have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Higgins
      • Higgins is located in Yancey County (NC)
    • Green Mountain
      (26 miles [41.8 km] to the southeast)
    • Burnsville
      (30 miles [48.3 km] to the southeast)
    • Double Island
      (30 miles [48.3 km] to the southeast)
      • Jump to our Gazetteer entry for Double Island
      • Double Island is located in Yancey County (NC)

For an expanded list of the communities that are closest to Fairview, see our County-by-County Page for Fairview.

Newspapers Published in Fairview ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 30 newspapers that have been published in the area around Fairview.

Although we're unaware of any newspapers that were published in the immediate area of Fairview, there are papers which were published within 9 miles [14.5 km]<4>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Fairview.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first visit the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Fairview:

Cemeteries Near Fairview ...

Below are cemeteries that are in the vicinity of Fairview.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Fairview covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Fairview, with the one closest to Fairview listed first.

  • Fairview Cemetery
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for the Fairview Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Fairview Cemetery
  • Leesburg Cemetery
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for the Leesburg Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Leesburg Cemetery
  • Mt. Zion Cemetery
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for the Mt. Zion Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Mt. Zion Cemetery
  • De Vault Cemetery
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for the De Vault Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the De Vault Cemetery
  • Bowman Cemetery
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for the Bowman Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Bowman Cemetery
  • New Hope Cemetery
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for the New Hope Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the New Hope Cemetery
  • Archer Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the Archer Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Archer Cemetery
  • Keebler Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the Keebler Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Keebler Cemetery
  • Bowmantown - Philadelphia Cemetery
    (2 miles [3.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Bowmantown - Philadelphia Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Bowmantown - Philadelphia Cemetery
  • Sulphur Springs Cemetery
    (2 miles [3.2 km] to the north)
    • Note: The GPS coordinates that we are using for the Sulphur Springs Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Sulphur Springs Cemetery
  • McCarty Cemetery
    (2 miles [3.2 km] to the south)
    • Note: The GPS coordinates that we are using for the McCarty Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the McCarty Cemetery
  • Bales Cemetery
    (2 miles [3.2 km] to the east)
    • Note: The GPS coordinates that we are using for the Bales Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Bales Cemetery
  • Continue List   (1022 more) ...
    • Carter Cemetery
      (2 miles [3.2 km] to the east)
      • Note: The GPS coordinates that we are using for the Carter Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Carter Cemetery
    • Pleasant Valley Cemetery
      (2 miles [3.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for the Pleasant Valley Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Pleasant Valley Cemetery
    • Patton Cemetery
      (3 miles [4.8 km] to the south)
      • Note: The GPS coordinates that we are using for the Patton Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Patton Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

While we didn't find Fairview in the Atlas, the following 1895 communities would have been found near the current location of Fairview.

These communities are listed based on their distance from Fairview, with the one closest to Fairview listed first.

  • Leesburg
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for Leesburg have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Leesburg
    • Leesburg is located in Washington County
  • Bowmantown
    (2 miles [3.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for Bowmantown have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bowmantown
    • Bowmantown is located in Washington County
    • Population from the 2010 Census: 302 people
  • February
    (2 miles [3.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for February have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for February
    • February is located in Washington County
  • Jonesborough
    (3 miles [4.8 km] to the southeast)
  • Locust Mount
    (3 miles [4.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Locust Mount have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Locust Mount
    • Locust Mount is located in Washington County
  • Telford
    (4 miles [6.4 km] to the south)
  • Keebler Crossroads
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Keebler Crossroads have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Keebler Crossroads
    • Keebler Crossroads is located in Washington County
  • Christie ‑ Historic
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for Christie have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Christie
    • Christie is located in Washington County
  • Matuta ‑ Historic
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Matuta have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Matuta
    • Matuta is located in Washington County
  • Harmony
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for Harmony have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Harmony
    • Harmony is located in Washington County
  • Mill Brook
    (6 miles [9.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Mill Brook have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mill Brook
    • Mill Brook is located in Washington County
  • Washington College
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Washington College have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Washington College
    • Washington College is located in Washington County
  • Continue List   (15 more) ...
    • Milburnton
      (6 miles [9.7 km] to the west)
      • Jump to our Gazetteer entry for Milburnton
      • Milburnton is located in Greene County
    • Meadowbrook
      (7 miles [11.3 km] to the north)
      • Note: The GPS coordinates that we are using for Meadowbrook have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Meadowbrook
      • Meadowbrook is located in Washington County
    • Broylesville
      (7 miles [11.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Broylesville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Broylesville
      • Broylesville is located in Washington County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Fairview. See our List of 1890's Communities around Fairview.

Unfortunately, we don't know of a website for Fairview. If you can help, please contact us through our Feedback Page.

The official website for Washington County: www.washingtoncountytn.com/

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Fairview) to Point B.Our distance measurements begin at a specific point in Fairview. The point we use is located at these GPS coordinates - Latitude: 36.3134, Longitude: -82.5326       In this case, the coordinates for Fairview have been provided by the Geographic Names Information System (GNIS).
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Fairview, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024