Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Clay Hill in the Atlas, the following communities of the 1890's would have been found near the current location of Clay Hill. The following communities are listed based on their distance, with the one closest to Clay Hill listed first.
- Rich Creek
(Less than 2 miles to the west)- Note: The GPS coordinates that we are using for Rich Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rich Creek
- Rich Creek is located in Marshall County
- Chapel Hill
(4 miles [6.4 km] to the north)- Note: The GPS coordinates that we are using for Chapel Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chapel Hill
- Chapel Hill is located in Marshall County
- Population from the 2020 Census: 1,571 people
- Jump to TripAdvisor's Tourism page for Chapel Hill <3>
- Verona
(5 miles [8 km] to the southwest) - Farmington
(5 miles [8 km] to the southwest)- Note: The GPS coordinates that we are using for Farmington have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Farmington
- Farmington is located in Marshall County
- Palmetto
(5 miles [8 km] to the south) - Poplins Crossroads
(5 miles [8 km] to the east)- Note: The GPS coordinates that we are using for Poplins Crossroads have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Poplins Crossroads
- Poplins Crossroads is located in Bedford County
- Unionville
(5 miles [8 km] to the northeast)- Jump to our Gazetteer entry for Unionville
- Unionville is located in Bedford County
- Population from the 2010 Census: 1,368 people
- Jump to TripAdvisor's Tourism page for Unionville <3>
- Caney Spring
(5 miles [8 km] to the northwest)- Note: The GPS coordinates that we are using for Caney Spring have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Caney Spring
- Caney Spring is located in Marshall County
- Wheel
(6 miles [9.7 km] to the southeast) - Lillard Mill
(6 miles [9.7 km] to the west)- Note: The GPS coordinates that we are using for Lillard Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lillard Mill
- Lillard Mill is located in Marshall County
- Fall Creek
(7 miles [11.3 km] to the east)- Note: The GPS coordinates that we are using for Fall Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fall Creek
- Fall Creek is located in Bedford County
- Thick
(7 miles [11.3 km] to the northwest) - Beasley
(7 miles [11.3 km] to the north) - Berlin
(8 miles [12.9 km] to the west)- Jump to our Gazetteer entry for Berlin
- Berlin is located in Marshall County
- Rover
(8 miles [12.9 km] to the northeast) - Hardison Mill
(8 miles [12.9 km] to the west)- Note: The GPS coordinates that we are using for Hardison Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hardison Mill
- Hardison Mill is located in Marshall County
- Holts Corner
(8 miles [12.9 km] to the north)- Jump to our Gazetteer entry for Holts Corner
- Holts Corner is located in Marshall County
- Bedford
(9 miles [14.5 km] to the southeast) - Longview
(9 miles [14.5 km] to the northeast)- Jump to our Gazetteer entry for Longview
- Longview is located in Bedford County
- South Berlin
(10 miles [16.1 km] to the southwest)- Note: The GPS coordinates that we are using for South Berlin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Berlin
- South Berlin is located in Marshall County
- Lewisburg
(10 miles [16.1 km] to the southwest)- Jump to our Gazetteer entry for Lewisburg
- Lewisburg is located in Marshall County
- Population from the 2020 Census: 12,559 people
- Jump to TripAdvisor's Tourism page for Lewisburg <3>
- Belfast
(10 miles [16.1 km] to the south) - Leftwich
(10 miles [16.1 km] to the west) - Vannatta
(11 miles [17.7 km] to the east) - Eagleville
(11 miles [17.7 km] to the north)- Jump to our Gazetteer entry for Eagleville
- Eagleville is located in Rutherford County
- Population from the 2020 Census: 803 people
- Jump to TripAdvisor's Tourism page for Eagleville <3>
- Rally Hill
(11 miles [17.7 km] to the northwest)- Note: The GPS coordinates that we are using for Rally Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rally Hill
- Rally Hill is located in Maury County
Off-the-Road Links ...
The official website for Marshall County: www.marshallcountytn.com/
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Clay Hill, please let us know so that we can improve our accuracy. |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |