|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Webb Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Webb Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Webb Cemetery. We've listed the following communities based on their distance, with the closest first.
- Bell Buckle
(2 miles [3.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bell Buckle
- Bell Buckle is located in Bedford County
- Population from the 2020 Census: 537 people
- Jump to TripAdvisor's Tourism page for Bell Buckle <3>
- Plainview
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plainview
- Plainview is located in Rutherford County
- Vannatta
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Vannatta have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vannatta
- Vannatta is located in Bedford County
- Estimated population in 2014: 398 people
- Midland
(6 miles [9.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Midland. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Midland
- Midland is located in Rutherford County
- Wartrace
(7 miles [11.3 km] to the southeast)
- Rucker
(8 miles [12.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Rucker. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rucker
- Rucker is located in Rutherford County
- Beechgrove
(8 miles [12.9 km] to the east)
- Longview
(8 miles [12.9 km] to the west)
- Jump to our Gazetteer entry for Longview
- Longview is located in Bedford County
- Gossburg
(9 miles [14.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Gossburg. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Gossburg
- Gossburg is located in Coffee County
- Anchor Mill ‑ Historic
(10 miles [16.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Anchor Mill. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Anchor Mill
- Anchor Mill is located in Bedford County
- Shelbyville
(10 miles [16.1 km] to the southwest)
- Haley
(10 miles [16.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Haley. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Haley
- Haley is located in Bedford County
- Burns Place
(10 miles [16.1 km] to the north)
- Jump to our Gazetteer entry for Burns Place
- Burns Place is located in Rutherford County
- Unionville
(11 miles [17.7 km] to the west)
- Cortner
(12 miles [19.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Cortner. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Cortner
- Cortner is located in Bedford County
- Dillton
(12 miles [19.3 km] to the north)
- Jump to our Gazetteer entry for Dillton
- Dillton is located in Rutherford County
- Concord
(12 miles [19.3 km] to the northwest)
- Normandy
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Normandy have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Normandy
- Normandy is located in Bedford County
- Population from the 2020 Census: 140 people
- Jump to TripAdvisor's Tourism page for Normandy <3>
- Willow Grove
(14 miles [22.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Willow Grove. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Willow Grove
- Willow Grove is located in Bedford County
- Cascade Hollow
(14 miles [22.5 km] to the southeast)
- Jump to our Gazetteer entry for Cascade Hollow
- Cascade Hollow is located in Bedford County
- Busy Corner
(14 miles [22.5 km] to the southeast)
- Jump to our Gazetteer entry for Busy Corner
- Busy Corner is located in Coffee County
- Bradyville
(14 miles [22.5 km] to the northeast)
- Jump to our Gazetteer entry for Bradyville
- Bradyville is located in Cannon County
- Murfreesboro
(15 miles [24.1 km] to the north)
- Kittrell
(15 miles [24.1 km] to the northeast)
- Jump to our Gazetteer entry for Kittrell
- Kittrell is located in Rutherford County
- Raus
(16 miles [25.7 km] to the south)
- Jump to our Gazetteer entry for Raus
- Raus is located in Bedford County
- Burgen
(16 miles [25.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Burgen. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Burgen
- Burgen is located in Cannon County
- Eagleville
(16 miles [25.7 km] to the northwest)
Off-the-Road Links ...
The official website for Rutherford County: www.rutherfordcounty.org/ The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Webb Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.6242, Longitude: -86.3864 In this case, the coordinates for the Webb Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|