|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Taylor Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Taylor Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Taylor Cemetery.
We've listed the following communities based on their distance, with the closest first:
- Unionville
(2 miles [3.2 km] to the southwest)
- Longview
(2 miles [3.2 km] to the southeast)
- Longview is located in Bedford County
- Jump to our Gazetteer entry for Longview
- Vannatta
(5 miles [8 km] to the southeast)
- Vannatta is located in Bedford County
- Jump to our Gazetteer entry for Vannatta
- Estimated population in 2014: 398 people
- Midland
(5 miles [8 km] to the east)
- Midland is located in Rutherford County
- Jump to our Gazetteer entry for Midland
- Concord
(5 miles [8 km] to the north)
- Chapel Hill
(7 miles [11.3 km] to the west)
- Eagleville
(7 miles [11.3 km] to the northwest)
- Holts Corner
(7 miles [11.3 km] to the west)
- Holts Corner is located in Marshall County
- Jump to our Gazetteer entry for Holts Corner
- Anchor Mill ‑ Historic
(8 miles [12.9 km] to the south)
- Anchor Mill is located in Bedford County
- Jump to our Gazetteer entry for Anchor Mill
- Allisona
(9 miles [14.5 km] to the northwest)
- Allisona is located in Rutherford County
- Jump to our Gazetteer entry for Allisona
- College Grove
(10 miles [16.1 km] to the northwest)
- Caney Spring
(11 miles [17.7 km] to the west)
- Caney Spring is located in Marshall County
- Jump to our Gazetteer entry for Caney Spring
- Patterson
(11 miles [17.7 km] to the north)
- Patterson is located in Rutherford County
- Jump to our Gazetteer entry for Patterson
- Anes
(12 miles [19.3 km] to the southwest)
- Anes is located in Marshall County
- Jump to our Gazetteer entry for Anes
- Plainview
(12 miles [19.3 km] to the east)
- Plainview is located in Rutherford County
- Jump to our Gazetteer entry for Plainview
- Rucker
(12 miles [19.3 km] to the northeast)
- Rucker is located in Rutherford County
- Jump to our Gazetteer entry for Rucker
- Snell ‑ Historic
(12 miles [19.3 km] to the north)
- Snell is located in Rutherford County
- Jump to our Gazetteer entry for Snell
- Estimated population in 2014: 1,361 people
- Shelbyville
(13 miles [20.9 km] to the southeast)
- Bell Buckle
(13 miles [20.9 km] to the east)
- Verona
(14 miles [22.5 km] to the southwest)
- Verona is located in Marshall County
- Jump to our Gazetteer entry for Verona
- Whitaker
(14 miles [22.5 km] to the south)
- Whitaker is located in Bedford County
- Jump to our Gazetteer entry for Whitaker
- Burns Place
(14 miles [22.5 km] to the northeast)
- Burns Place is located in Rutherford County
- Jump to our Gazetteer entry for Burns Place
- Berlin
(16 miles [25.7 km] to the southwest)
- Berlin is located in Marshall County
- Jump to our Gazetteer entry for Berlin
- Oak Hill
(16 miles [25.7 km] to the southwest)
- Oak Hill is located in Marshall County
- Jump to our Gazetteer entry for Oak Hill
- Wartrace
(16 miles [25.7 km] to the southeast)
- Arrington
(16 miles [25.7 km] to the northwest)
- Dillton
(16 miles [25.7 km] to the northeast)
- Dillton is located in Rutherford County
- Jump to our Gazetteer entry for Dillton
- Murfreesboro
(16 miles [25.7 km] to the northeast)
- Peytonsville
(16 miles [25.7 km] to the northwest)
- Peytonsville is located in Williamson County
- Jump to our Gazetteer entry for Peytonsville
- Duplex
(16 miles [25.7 km] to the west)
- Duplex is located in Williamson County
- Jump to our Gazetteer entry for Duplex
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Taylor Cemetery) to Point B. In other words: 'As the crow flies'. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|