|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the McElroy Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the McElroy Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the McElroy Cemetery.
We've listed the following communities based on their distance, with the closest first:
- Vannatta
(3 miles [4.8 km] to the west)
- Vannatta is located in Bedford County
- Jump to our Gazetteer entry for Vannatta
- Estimated population in 2014: 398 people
- Bell Buckle
(4 miles [6.4 km] to the southeast)
- Midland
(4 miles [6.4 km] to the northwest)
- Midland is located in Rutherford County
- Jump to our Gazetteer entry for Midland
- Longview
(5 miles [8 km] to the west)
- Longview is located in Bedford County
- Jump to our Gazetteer entry for Longview
- Plainview
(6 miles [9.7 km] to the northeast)
- Plainview is located in Rutherford County
- Jump to our Gazetteer entry for Plainview
- Anchor Mill ‑ Historic
(8 miles [12.9 km] to the southwest)
- Anchor Mill is located in Bedford County
- Jump to our Gazetteer entry for Anchor Mill
- Wartrace
(8 miles [12.9 km] to the southeast)
- Rucker
(8 miles [12.9 km] to the north)
- Rucker is located in Rutherford County
- Jump to our Gazetteer entry for Rucker
- Shelbyville
(9 miles [14.5 km] to the south)
- Unionville
(9 miles [14.5 km] to the west)
- Beechgrove
(10 miles [16.1 km] to the east)
- Burns Place
(10 miles [16.1 km] to the northeast)
- Burns Place is located in Rutherford County
- Jump to our Gazetteer entry for Burns Place
- Concord
(10 miles [16.1 km] to the northwest)
- Haley
(11 miles [17.7 km] to the southeast)
- Haley is located in Bedford County
- Jump to our Gazetteer entry for Haley
- Gossburg
(12 miles [19.3 km] to the east)
- Gossburg is located in Coffee County
- Jump to our Gazetteer entry for Gossburg
- Cortner
(13 miles [20.9 km] to the southeast)
- Cortner is located in Bedford County
- Jump to our Gazetteer entry for Cortner
- Dillton
(13 miles [20.9 km] to the northeast)
- Dillton is located in Rutherford County
- Jump to our Gazetteer entry for Dillton
- Eagleville
(14 miles [22.5 km] to the northwest)
- Chapel Hill
(14 miles [22.5 km] to the west)
- Willow Grove
(15 miles [24.1 km] to the southeast)
- Willow Grove is located in Bedford County
- Jump to our Gazetteer entry for Willow Grove
- Normandy
(15 miles [24.1 km] to the southeast)
- Murfreesboro
(15 miles [24.1 km] to the north)
- Holts Corner
(15 miles [24.1 km] to the west)
- Holts Corner is located in Marshall County
- Jump to our Gazetteer entry for Holts Corner
- Whitaker
(16 miles [25.7 km] to the southwest)
- Whitaker is located in Bedford County
- Jump to our Gazetteer entry for Whitaker
- Raus
(16 miles [25.7 km] to the south)
- Raus is located in Bedford County
- Jump to our Gazetteer entry for Raus
- Cascade Hollow
(16 miles [25.7 km] to the southeast)
- Cascade Hollow is located in Bedford County
- Jump to our Gazetteer entry for Cascade Hollow
- Snell ‑ Historic
(16 miles [25.7 km] to the northwest)
- Snell is located in Rutherford County
- Jump to our Gazetteer entry for Snell
- Estimated population in 2014: 1,361 people
- Busy Corner
(16 miles [25.7 km] to the southeast)
- Busy Corner is located in Coffee County
- Jump to our Gazetteer entry for Busy Corner
- Bradyville
(16 miles [25.7 km] to the northeast)
- Bradyville is located in Cannon County
- Jump to our Gazetteer entry for Bradyville
- Patterson
(16 miles [25.7 km] to the northwest)
- Patterson is located in Rutherford County
- Jump to our Gazetteer entry for Patterson
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- McElroy Cemetery) to Point B. In other words: 'As the crow flies'. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|