Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Litle - Cooper Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Litle - Cooper Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Litle - Cooper Cemetery (FG ID #2484773). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Litle - Cooper Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Unionville
(Less than 2 miles to the southwest)
- Longview
(2 miles [3.2 km] to the east)
- Jump to our Gazetteer entry for Longview
- Longview is located in Bedford County
- Midland
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Midland have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Midland
- Midland is located in Rutherford County
- Chapel Hill
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Chapel Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chapel Hill
- Chapel Hill is located in Marshall County
- Population from the 2020 Census: 1,571 people
- Jump to TripAdvisor's Tourism page for Chapel Hill <3>
- Concord
(6 miles [9.7 km] to the north)
- Anchor Mill ‑ Historic
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Anchor Mill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Anchor Mill
- Anchor Mill is located in Bedford County
- Eagleville
(7 miles [11.3 km] to the northwest)
- Holts Corner
(7 miles [11.3 km] to the northwest)
- Jump to our Gazetteer entry for Holts Corner
- Holts Corner is located in Marshall County
- Caney Spring
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Caney Spring have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Caney Spring
- Caney Spring is located in Marshall County
- College Grove
(11 miles [17.7 km] to the northwest)
- Shelbyville
(12 miles [19.3 km] to the southeast)
- Rucker
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Rucker have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rucker
- Rucker is located in Rutherford County
- Patterson
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Patterson have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Patterson
- Patterson is located in Rutherford County
- Verona
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Verona have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Verona
- Verona is located in Marshall County
- Whitaker
(13 miles [20.9 km] to the south)
- Jump to our Gazetteer entry for Whitaker
- Whitaker is located in Bedford County
- Bell Buckle
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bell Buckle
- Bell Buckle is located in Bedford County
- Population from the 2020 Census: 537 people
- Jump to TripAdvisor's Tourism page for Bell Buckle <3>
- Plainview
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plainview
- Plainview is located in Rutherford County
- Oak Hill
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Hill
- Oak Hill is located in Marshall County
- Burns Place
(15 miles [24.1 km] to the northeast)
- Jump to our Gazetteer entry for Burns Place
- Burns Place is located in Rutherford County
- Berlin
(16 miles [25.7 km] to the southwest)
- Jump to our Gazetteer entry for Berlin
- Berlin is located in Marshall County
- Wartrace
(16 miles [25.7 km] to the southeast)
- Arrington
(16 miles [25.7 km] to the northwest)
- Peytonsville
(16 miles [25.7 km] to the northwest)
- Jump to our Gazetteer entry for Peytonsville
- Peytonsville is located in Williamson County
- Duplex
(16 miles [25.7 km] to the northwest)
- Jump to our Gazetteer entry for Duplex
- Duplex is located in Williamson County
- Dillton
(17 miles [27.4 km] to the northeast)
- Jump to our Gazetteer entry for Dillton
- Dillton is located in Rutherford County
- Murfreesboro
(17 miles [27.4 km] to the northeast)
Off-the-Road Links ...
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Litle - Cooper Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.6475, Longitude: -86.5772 |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |