|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Dunn Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Dunn Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Dunn Cemetery.
We've listed the following communities based on their distance, with the closest first:
- Readyville
(Less than 2 miles to the northeast)
- Kittrell
(3 miles [4.8 km] to the west)
- Kittrell is also located in Rutherford County
- Jump to our Gazetteer entry for Kittrell
- Bradyville
(4 miles [6.4 km] to the south)
- Bradyville is located in Cannon County
- Jump to our Gazetteer entry for Bradyville
- Burt
(4 miles [6.4 km] to the southeast)
- Burt is located in Cannon County
- Jump to our Gazetteer entry for Burt
- Burgen
(6 miles [9.7 km] to the southeast)
- Burgen is located in Cannon County
- Jump to our Gazetteer entry for Burgen
- Woodbury
(6 miles [9.7 km] to the east)
- Dillton
(7 miles [11.3 km] to the west)
- Dillton is also located in Rutherford County
- Jump to our Gazetteer entry for Dillton
- Milton
(8 miles [12.9 km] to the north)
- Milton is also located in Rutherford County
- Jump to our Gazetteer entry for Milton
- Burns Place
(9 miles [14.5 km] to the west)
- Burns Place is also located in Rutherford County
- Jump to our Gazetteer entry for Burns Place
- Gossburg
(9 miles [14.5 km] to the south)
- Gossburg is located in Coffee County
- Jump to our Gazetteer entry for Gossburg
- Manus Town ‑ Historic
(10 miles [16.1 km] to the east)
- Manus Town was located in Cannon County
- Jump to our Gazetteer entry for Manus Town
- Compton
(10 miles [16.1 km] to the northwest)
- Compton is also located in Rutherford County
- Jump to our Gazetteer entry for Compton
- Rucker
(11 miles [17.7 km] to the west)
- Rucker is also located in Rutherford County
- Jump to our Gazetteer entry for Rucker
- Plainview
(11 miles [17.7 km] to the southwest)
- Plainview is also located in Rutherford County
- Jump to our Gazetteer entry for Plainview
- Bluewing
(11 miles [17.7 km] to the east)
- Bluewing is located in Cannon County
- Jump to our Gazetteer entry for Bluewing
- Thomas Town ‑ Historic
(11 miles [17.7 km] to the east)
- Thomas Town was located in Cannon County
- Jump to our Gazetteer entry for Thomas Town
- Auburntown
(11 miles [17.7 km] to the northeast)
- Auburntown is located in Cannon County
- Jump to our Gazetteer entry for Auburntown
- Population from the 2020 Census: 266 people
- Murfreesboro
(11 miles [17.7 km] to the west)
- Cainsville
(12 miles [19.3 km] to the north)
- Cainsville is located in Wilson County
- Jump to our Gazetteer entry for Cainsville
- Beechgrove
(12 miles [19.3 km] to the south)
- Woods
(13 miles [20.9 km] to the east)
- Woods is located in Cannon County
- Jump to our Gazetteer entry for Woods
- Naola ‑ Historic
(14 miles [22.5 km] to the southeast)
- Naola was located in Coffee County
- Jump to our Gazetteer entry for Naola
- Gassaway
(14 miles [22.5 km] to the northeast)
- Gassaway is located in Cannon County
- Jump to our Gazetteer entry for Gassaway
- Walterhill
(14 miles [22.5 km] to the northwest)
- Walterhill is also located in Rutherford County
- Jump to our Gazetteer entry for Walterhill
- Round Top
(15 miles [24.1 km] to the northeast)
- Round Top is located in Wilson County
- Jump to our Gazetteer entry for Round Top
- Statesville
(15 miles [24.1 km] to the north)
- Statesville is located in Wilson County
- Jump to our Gazetteer entry for Statesville
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Dunn Cemetery) to Point B. In other words: 'As the crow flies'. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|