|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Brown - Little Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Brown - Little Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Brown - Little Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Eagleville
(4 miles [6.4 km] to the north)
- Unionville
(4 miles [6.4 km] to the southeast)
- Holts Corner
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for Holts Corner
- Holts Corner is located in Marshall County
- Chapel Hill
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Chapel Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chapel Hill
- Chapel Hill is located in Marshall County
- Population from the 2020 Census: 1,571 people
- Jump to TripAdvisor's Tourism page for Chapel Hill <2>
- Longview
(5 miles [8 km] to the southeast)
- Jump to our Gazetteer entry for Longview
- Longview is located in Bedford County
- Concord
(5 miles [8 km] to the northeast)
- Midland
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Midland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Midland
- Midland is located in Rutherford County
- College Grove
(8 miles [12.9 km] to the north)
- Caney Spring
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Caney Spring have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Caney Spring
- Caney Spring is located in Marshall County
- Anchor Mill ‑ Historic
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Anchor Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Anchor Mill
- Anchor Mill is located in Bedford County
- Patterson
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Patterson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Patterson
- Patterson is located in Rutherford County
- Duplex
(12 miles [19.3 km] to the west)
- Jump to our Gazetteer entry for Duplex
- Duplex is located in Williamson County
- Verona
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Verona have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Verona
- Verona is located in Marshall County
- Peytonsville
(13 miles [20.9 km] to the northwest)
- Jump to our Gazetteer entry for Peytonsville
- Peytonsville is located in Williamson County
- Arrington
(14 miles [22.5 km] to the north)
- Rucker
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Rucker have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rucker
- Rucker is located in Rutherford County
- Berlin
(15 miles [24.1 km] to the southwest)
- Jump to our Gazetteer entry for Berlin
- Berlin is located in Marshall County
- Whitaker
(15 miles [24.1 km] to the south)
- Jump to our Gazetteer entry for Whitaker
- Whitaker is located in Bedford County
- Shelbyville
(15 miles [24.1 km] to the southeast)
- Plainview
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plainview
- Plainview is located in Rutherford County
- Oak Hill
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Hill
- Oak Hill is located in Marshall County
- Bell Buckle
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bell Buckle
- Bell Buckle is located in Bedford County
- Population from the 2020 Census: 537 people
- Jump to TripAdvisor's Tourism page for Bell Buckle <2>
- Burns Place
(16 miles [25.7 km] to the east)
- Jump to our Gazetteer entry for Burns Place
- Burns Place is located in Rutherford County
- Murfreesboro
(17 miles [27.4 km] to the northeast)
- Thompson's Station
(17 miles [27.4 km] to the northwest)
- Jump to our Gazetteer entry for Thompson's Station
- Thompson's Station is located in Williamson County
- Population from the 2020 Census: 6,973 people
- Former name for Thompson's Station:
- Littlebury
- Jump to TripAdvisor's Tourism page for Thompson's Station <2>
- Spring Hill
(17 miles [27.4 km] to the west)
- New Town
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for New Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Town
- New Town is located in Maury County
Off-the-Road Links ...
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Brown - Little Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.6773, Longitude: -86.6228 In this case, the coordinates for the Brown - Little Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|