Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Alsup Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Alsup Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Alsup Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Tennessee Ridge
(3 miles [4.8 km] to the southeast)- Jump to our Gazetteer entry for Tennessee Ridge
- Tennessee Ridge is located in Houston County
- Population from the 2020 Census: 1,330 people
- Jump to TripAdvisor's Tourism page for Tennessee Ridge <2>
- Erin
(5 miles [8 km] to the east)- Jump to our Gazetteer entry for Erin
- Erin is located in Houston County
- Population from the 2020 Census: 1,308 people
- Jump to TripAdvisor's Tourism page for Erin <2>
- McKinnon
(6 miles [9.7 km] to the west) - Magnolia
(7 miles [11.3 km] to the southwest) - Dover
(9 miles [14.5 km] to the north)- Jump to our Gazetteer entry for Dover
- Dover is located in Stewart County
- Population from the 2020 Census: 1,578 people
- Former name for Dover:
- Monroe
- Jump to TripAdvisor's Tourism page for Dover <2>
- Cumberland City
(9 miles [14.5 km] to the east)- Jump to our Gazetteer entry for Cumberland City
- Cumberland City is located in Stewart County
- Population from the 2020 Census: 310 people
- Jump to TripAdvisor's Tourism page for Cumberland City <2>
- Throckmorton
(10 miles [16.1 km] to the northeast)- Jump to our Gazetteer entry for Throckmorton
- Throckmorton is located in Stewart County
- Estimated population in 2014: 1,692 people
- Indian Mound
(11 miles [17.7 km] to the northeast)- Jump to our Gazetteer entry for Indian Mound
- Indian Mound is located in Stewart County
- Jump to TripAdvisor's Tourism page for Indian Mound <2>
- Faxon
(13 miles [20.9 km] to the southwest)- Jump to our Gazetteer entry for Faxon
- Faxon is located in Benton County
- Legate
(15 miles [24.1 km] to the north) - Big Sandy
(17 miles [27.4 km] to the southwest)- Jump to our Gazetteer entry for Big Sandy
- Big Sandy is located in Benton County
- Population from the 2020 Census: 517 people
- Jump to TripAdvisor's Tourism page for Big Sandy <2>
- Oakwood
(17 miles [27.4 km] to the northeast)- Jump to our Gazetteer entry for Oakwood
- Oakwood is located in Montgomery County
- Bumpus Mills
(17 miles [27.4 km] to the north)- Jump to our Gazetteer entry for Bumpus Mills
- Bumpus Mills is located in Stewart County
- Jump to TripAdvisor's Tourism page for Bumpus Mills <2>
- Waverly
(18 miles [29 km] to the south)- Jump to our Gazetteer entry for Waverly
- Waverly is located in Humphreys County
- Population from the 2020 Census: 4,118 people
- Jump to TripAdvisor's Tourism page for Waverly <2>
- Slayden
(18 miles [29 km] to the east)- Jump to our Gazetteer entry for Slayden
- Slayden is located in Dickson County
- Population from the 2020 Census: 207 people
- Parker Town ‑ Historic
(18 miles [29 km] to the north)- Note: The GPS coordinates that we are using for Parker Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parker Town
- Parker Town is located in Stewart County
- McEwen
(19 miles [30.6 km] to the southeast)- Jump to our Gazetteer entry for McEwen
- McEwen is located in Humphreys County
- Population from the 2020 Census: 1,743 people
- Jump to TripAdvisor's Tourism page for McEwen <2>
- Dotsonville
(19 miles [30.6 km] to the northeast)- Jump to our Gazetteer entry for Dotsonville
- Dotsonville is located in Montgomery County
- Springville
(20 miles [32.2 km] to the west)- Jump to our Gazetteer entry for Springville
- Springville is located in Henry County
- Jump to TripAdvisor's Tourism page for Springville <2>
- Tobaccoport
(20 miles [32.2 km] to the north)- Note: The GPS coordinates that we are using for Tobaccoport have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tobaccoport
- Tobaccoport is located in Stewart County
- Vanleer
(21 miles [33.8 km] to the east)- Jump to our Gazetteer entry for Vanleer
- Vanleer is located in Dickson County
- Population from the 2020 Census: 426 people
- Jump to TripAdvisor's Tourism page for Vanleer <2>
- Manleyville
(22 miles [35.4 km] to the southwest)- Jump to our Gazetteer entry for Manleyville
- Manleyville is located in Henry County
- Woods Valley
(22 miles [35.4 km] to the east)- Jump to our Gazetteer entry for Woods Valley
- Woods Valley is located in Dickson County
- Dunn Chapel
(22 miles [35.4 km] to the east)- Note: The GPS coordinates that we are using for Dunn Chapel have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dunn Chapel
- Dunn Chapel is located in Dickson County
- Louise
(22 miles [35.4 km] to the east)
Off-the-Road Links ...
The official website for Stewart County: www.stewartcountygovernment.com
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Alsup Cemetery. The point we use is located at these GPS coordinates - Latitude: 36.3506, Longitude: -87.7992 In this case, the coordinates for the Alsup Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |