RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Bedford County >> Cascade Hollow >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Cascade Hollow (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Cascade Hollow. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most doctors and hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Cascade Hollow is located in Bedford County.

To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Bedford County: Coffee, Lincoln, Marshall, Moore & Rutherford.

Below are the counties that are near Cascade Hollow. For each of these counties, we show a sample of those communities that are closest to Cascade Hollow:

  • Bedford County     (The home county of Cascade Hollow)
    • The following are listed by their distance from Cascade Hollow, with the one closest to Cascade Hollow listed first.
    • Normandy
      (Less than 2 miles to the northwest)
      • Note: The GPS coordinates that we are using for Normandy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Normandy
      • Normandy is located in Bedford County
      • Population from the 2020 Census: 140 people
      • Jump to TripAdvisor's Tourism page for Normandy <2>
    • Cortner
      (2 miles [3.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for Cortner have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cortner
      • Cortner is located in Bedford County
    • Willow Grove
      (2 miles [3.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Willow Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Willow Grove
      • Willow Grove is located in Bedford County
    • Haley
      (4 miles [6.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Haley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Haley
      • Haley is located in Bedford County
    • Raus
      (5 miles [8 km] to the southwest)
      • Jump to our Gazetteer entry for Raus
      • Raus is located in Bedford County
    • Wartrace
      (7 miles [11.3 km] to the northwest)
    • Bell Buckle
      (11 miles [17.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bell Buckle
      • Bell Buckle is located in Bedford County
      • Population from the 2020 Census: 537 people
      • Jump to TripAdvisor's Tourism page for Bell Buckle <2>
    • Shelbyville
      (12 miles [19.3 km] to the west)
    • Vannatta
      (17 miles [27.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Vannatta have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vannatta
      • Vannatta is located in Bedford County
      • Estimated population in 2014: 398 people
    • Anchor Mill ‑ Historic
      (17 miles [27.4 km] to the west)
      • Note: The GPS coordinates that we are using for Anchor Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Anchor Mill
      • Anchor Mill is located in Bedford County
    • Longview
      (20 miles [32.2 km] to the northwest)
      • Jump to our Gazetteer entry for Longview
      • Longview is located in Bedford County
    • Whitaker
      (21 miles [33.8 km] to the west)
      • Jump to our Gazetteer entry for Whitaker
      • Whitaker is located in Bedford County
    • Unionville
      (22 miles [35.4 km] to the northwest)
  • Cannon County
    • The following are listed by their distance from Cascade Hollow, with the one closest to Cascade Hollow listed first.
    • Hollow Springs
      (17 miles [27.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Hollow Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hollow Springs
      • Hollow Springs is located in Cannon County
      • Estimated population in 2014: 706 people
    • Bradyville
      (20 miles [32.2 km] to the north)
      • Jump to our Gazetteer entry for Bradyville
      • Bradyville is located in Cannon County
    • Burgen
      (20 miles [32.2 km] to the north)
      • Note: The GPS coordinates that we are using for Burgen have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Burgen
      • Burgen is located in Cannon County
    • Burt
      (23 miles [37 km] to the north)
      • Jump to our Gazetteer entry for Burt
      • Burt is located in Cannon County
    • Bluewing
      (27 miles [43.5 km] to the northeast)
      • Jump to our Gazetteer entry for Bluewing
      • Bluewing is located in Cannon County
    • Manus Town ‑ Historic
      (27 miles [43.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Manus Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Manus Town
      • Manus Town is located in Cannon County
    • Woodbury
      (28 miles [45.1 km] to the north)
    • Thomas Town ‑ Historic
      (29 miles [46.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Thomas Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Thomas Town
      • Thomas Town is located in Cannon County
  • Coffee County
    • The following are listed by their distance from Cascade Hollow, with the one closest to Cascade Hollow listed first.
    • Homaway Village
      (4 miles [6.4 km] to the south)
      • Note: The GPS coordinates that we are using for Homaway Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Homaway Village
      • Homaway Village is located in Coffee County
    • Tullahoma
      (5 miles [8 km] to the south)
    • Belmont
      (7 miles [11.3 km] to the east)
      • Note: The GPS coordinates that we are using for Belmont have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Belmont
      • Belmont is located in Coffee County
    • Busy Corner
      (7 miles [11.3 km] to the northeast)
      • Jump to our Gazetteer entry for Busy Corner
      • Busy Corner is located in Coffee County
    • Southgate Park
      (7 miles [11.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Southgate Park have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Southgate Park
      • Southgate Park is located in Coffee County
      • Estimated population in 2014: 2,284 people
    • Manchester
      (9 miles [14.5 km] to the east)
    • Royal Oaks
      (9 miles [14.5 km] to the east)
      • Jump to our Gazetteer entry for Royal Oaks
      • Royal Oaks is located in Coffee County
    • New Union
      (11 miles [17.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for New Union have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Union
      • New Union is located in Coffee County
      • Population from the 2010 Census: 1,431 people
    • Beechgrove
      (12 miles [19.3 km] to the north)
    • Forest Mill
      (12 miles [19.3 km] to the northeast)
      • Jump to our Gazetteer entry for Forest Mill
      • Forest Mill is located in Coffee County
    • Hillsboro
      (15 miles [24.1 km] to the east)
    • Gossburg
      (15 miles [24.1 km] to the north)
      • Note: The GPS coordinates that we are using for Gossburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gossburg
      • Gossburg is located in Coffee County
    • Stephenson
      (18 miles [29 km] to the east)
      • Jump to our Gazetteer entry for Stephenson
      • Stephenson is located in Coffee County
  • Franklin County
    • The following are listed by their distance from Cascade Hollow, with the one closest to Cascade Hollow listed first.
    • Winchester Springs
      (14 miles [22.5 km] to the south)
      • Jump to our Gazetteer entry for Winchester Springs
      • Winchester Springs is located in Franklin County
    • Estill Springs
      (14 miles [22.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Estill Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Estill Springs
      • Estill Springs is located in Franklin County
      • Population from the 2020 Census: 2,040 people
      • Jump to TripAdvisor's Tourism page for Estill Springs <2>
    • Garner Ford
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Garner Ford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Garner Ford
      • Garner Ford is located in Franklin County
      • Estimated population in 2014: 309 people
    • Decherd
      (18 miles [29 km] to the southeast)
      • Note: The GPS coordinates that we are using for Decherd have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Decherd
      • Decherd is located in Franklin County
      • Population from the 2020 Census: 2,372 people
      • Jump to TripAdvisor's Tourism page for Decherd <2>
    • Winchester
      (19 miles [30.6 km] to the southeast)
    • Lexie
      (20 miles [32.2 km] to the south)
      • Jump to our Gazetteer entry for Lexie
      • Lexie is located in Franklin County
    • Greenhaw
      (20 miles [32.2 km] to the southeast)
      • Jump to our Gazetteer entry for Greenhaw
      • Greenhaw is located in Franklin County
    • Liberty
      (22 miles [35.4 km] to the south)
      • Note: The GPS coordinates that we are using for Liberty have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Liberty
      • Liberty is located in Franklin County
      • Estimated population in 2014: 318 people
    • Cowan
      (23 miles [37 km] to the southeast)
      • Note: The GPS coordinates that we are using for Cowan have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cowan
      • Cowan is located in Franklin County
      • Population from the 2020 Census: 1,668 people
      • Jump to TripAdvisor's Tourism page for Cowan <2>
    • Sewanee
      (24 miles [38.6 km] to the southeast)
    • Saint Marys
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Saint Marys have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saint Marys
      • Saint Marys is located in Franklin County
      • Estimated population in 2014: 785 people
    • Sand Switch
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Sand Switch have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sand Switch
      • Sand Switch is located in Franklin County
    • Beans Creek
      (26 miles [41.8 km] to the south)
      • Jump to our Gazetteer entry for Beans Creek
      • Beans Creek is located in Franklin County
  • Grundy County
    • The following are listed by their distance from Cascade Hollow, with the one closest to Cascade Hollow listed first.
    • Pelham
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Pelham have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pelham
      • Pelham is located in Grundy County
      • Population from the 2010 Census: 403 people
      • Jump to TripAdvisor's Tourism page for Pelham <2>
    • Monteagle
      (27 miles [43.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Monteagle have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Monteagle
      • Monteagle is located in Grundy County
      • Population from the 2020 Census: 1,238 people
      • Jump to TripAdvisor's Tourism page for Monteagle <2>
    • Altamont
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for Altamont have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Altamont
      • Altamont is located in Grundy County
      • Population from the 2020 Census: 1,055 people
      • Jump to TripAdvisor's Tourism page for Altamont <2>
    • Sartain Springs
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for Sartain Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sartain Springs
      • Sartain Springs is located in Grundy County
      • Estimated population in 2014: 380 people
    • Tracy City
      (30 miles [48.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Tracy City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tracy City
      • Tracy City is located in Grundy County
      • Population from the 2020 Census: 1,403 people
      • Jump to TripAdvisor's Tourism page for Tracy City <2>
  • Lincoln County
    • The following are listed by their distance from Cascade Hollow, with the one closest to Cascade Hollow listed first.
    • Gattistown
      (18 miles [29 km] to the southwest)
      • Note: The GPS coordinates that we are using for Gattistown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gattistown
      • Gattistown is located in Lincoln County
      • Estimated population in 2014: 4,158 people
    • Belleville
      (20 miles [32.2 km] to the southwest)
      • Jump to our Gazetteer entry for Belleville
      • Belleville is located in Lincoln County
    • Petersburg
      (23 miles [37 km] to the west)
    • Clarks Ferry
      (26 miles [41.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Clarks Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Clarks Ferry
      • Clarks Ferry is located in Lincoln County
      • Estimated population in 2014: 387 people
    • Elk Mill Village
      (26 miles [41.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Elk Mill Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elk Mill Village
      • Elk Mill Village is located in Lincoln County
    • Corder Crossroads
      (27 miles [43.5 km] to the southwest)
      • Jump to our Gazetteer entry for Corder Crossroads
      • Corder Crossroads is located in Lincoln County
    • Fayetteville
      (27 miles [43.5 km] to the southwest)
    • Flintville
      (28 miles [45.1 km] to the south)
      • Jump to our Gazetteer entry for Flintville
      • Flintville is located in Lincoln County
      • Population from the 2010 Census: 627 people
    • Hughey
      (29 miles [46.7 km] to the southwest)
      • Jump to our Gazetteer entry for Hughey
      • Hughey is located in Lincoln County
    • Park City Heights
      (30 miles [48.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Park City Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Park City Heights
      • Park City Heights is located in Lincoln County
      • Population from the 2010 Census: 2,442 people
    • Park City
      (30 miles [48.3 km] to the southwest)
      • Jump to our Gazetteer entry for Park City
      • Park City is located in Lincoln County
  • Marshall County
    • The following are listed by their distance from Cascade Hollow, with the one closest to Cascade Hollow listed first.
    • Talley
      (25 miles [40.2 km] to the west)
      • Note: The GPS coordinates that we are using for Talley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Talley
      • Talley is located in Marshall County
    • Oak Hill
      (26 miles [41.8 km] to the west)
      • Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oak Hill
      • Oak Hill is located in Marshall County
    • Orrs
      (26 miles [41.8 km] to the west)
      • Note: The GPS coordinates that we are using for Orrs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Orrs
      • Orrs is located in Marshall County
      • Estimated population in 2014: 123 people
    • Chapel Hill
      (28 miles [45.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Chapel Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chapel Hill
      • Chapel Hill is located in Marshall County
      • Population from the 2020 Census: 1,571 people
      • Jump to TripAdvisor's Tourism page for Chapel Hill <2>
    • Delina
      (29 miles [46.7 km] to the southwest)
      • Jump to our Gazetteer entry for Delina
      • Delina is located in Marshall County
    • Verona
      (29 miles [46.7 km] to the west)
      • Note: The GPS coordinates that we are using for Verona have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Verona
      • Verona is located in Marshall County
    • Holts Corner
      (30 miles [48.3 km] to the northwest)
      • Jump to our Gazetteer entry for Holts Corner
      • Holts Corner is located in Marshall County
    • Lewisburg
      (30 miles [48.3 km] to the west)
  • Moore County
    • The following are listed by their distance from Cascade Hollow, with the one closest to Cascade Hollow listed first.
    • Countyline
      (10 miles [16.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Countyline have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Countyline
      • Countyline is located in Moore County
    • Lynchburg
      (13 miles [20.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for Lynchburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lynchburg
      • Lynchburg is located in Moore County
      • Jump to TripAdvisor's Tourism page for Lynchburg <2>
  • Rutherford County
    • The following are listed by their distance from Cascade Hollow, with the one closest to Cascade Hollow listed first.
    • Plainview
      (18 miles [29 km] to the north)
      • Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Plainview
      • Plainview is located in Rutherford County
    • Midland
      (20 miles [32.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for Midland have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Midland
      • Midland is located in Rutherford County
    • Burns Place
      (22 miles [35.4 km] to the north)
      • Jump to our Gazetteer entry for Burns Place
      • Burns Place is located in Rutherford County
    • Rucker
      (22 miles [35.4 km] to the north)
      • Note: The GPS coordinates that we are using for Rucker have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rucker
      • Rucker is located in Rutherford County
    • Dillton
      (24 miles [38.6 km] to the north)
      • Jump to our Gazetteer entry for Dillton
      • Dillton is located in Rutherford County
    • Kittrell
      (26 miles [41.8 km] to the north)
      • Jump to our Gazetteer entry for Kittrell
      • Kittrell is located in Rutherford County
    • Readyville
      (26 miles [41.8 km] to the north)
    • Concord
      (26 miles [41.8 km] to the northwest)
    • Murfreesboro
      (29 miles [46.7 km] to the north)
    • Eagleville
      (30 miles [48.3 km] to the northwest)
  • Warren County
    • The following are listed by their distance from Cascade Hollow, with the one closest to Cascade Hollow listed first.
    • Morrison
      (21 miles [33.8 km] to the northeast)
    • Viola
      (22 miles [35.4 km] to the east)
      • Note: The GPS coordinates that we are using for Viola have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Viola
      • Viola is located in Warren County
      • Population from the 2020 Census: 141 people
      • Jump to TripAdvisor's Tourism page for Viola <2>
    • Centertown
      (26 miles [41.8 km] to the northeast)
      • Jump to our Gazetteer entry for Centertown
      • Centertown is located in Warren County
      • Population from the 2020 Census: 256 people
    • Daylight
      (30 miles [48.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Daylight have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Daylight
      • Daylight is located in Warren County

For an expanded list of the communities that are closest to Cascade Hollow, see our County-by-County Page for Cascade Hollow.

Newspapers Published in Cascade Hollow ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 40 newspapers that have been published in the area around Cascade Hollow.

Although we're unaware of any newspapers that were published in the immediate area of Cascade Hollow, there are papers which were published within 13 miles [20.9 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Cascade Hollow.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Cascade Hollow:

Cemeteries Near Cascade Hollow ...

Below are cemeteries that are in the vicinity of Cascade Hollow.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Cascade Hollow covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Cascade Hollow, with the one closest to Cascade Hollow listed first.

  • Weaver Cemetery
    (Less than 2 miles to the west)
    • Note: The GPS coordinates that we are using for the Weaver Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Weaver Cemetery
  • Renegar Cemetery
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for the Renegar Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Renegar Cemetery
  • Leming Cemetery
    (Less than 2 miles to the west)
  • Green Cemetery
    (Less than 2 miles to the west)
    • Note: The GPS coordinates that we are using for the Green Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Green Cemetery
  • Barton Cemetery
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for the Barton Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Barton Cemetery
  • Austin Cemetery
    (Less than 2 miles to the northwest)
    • Note: The GPS coordinates that we are using for the Austin Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Austin Cemetery
  • Huffman Cemetery
    (Less than 2 miles to the north)
    • Note: The GPS coordinates that we are using for the Huffman Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Huffman Cemetery
  • George Cemetery
    (Less than 2 miles to the northwest)
    • Note: The GPS coordinates that we are using for the George Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the George Cemetery
  • Daniel Cemetery
    (2 miles [3.2 km] to the west)
    • Note: The GPS coordinates that we are using for the Daniel Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Daniel Cemetery
  • Culley - Holt Cemetery
    (2 miles [3.2 km] to the north)
    • Note: The GPS coordinates that we are using for the Culley - Holt Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Culley - Holt Cemetery
  • Stone Cemetery
    (2 miles [3.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Stone Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Stone Cemetery
  • McQuiddy Cemetery
    (2 miles [3.2 km] to the north)
    • Note: The GPS coordinates that we are using for the McQuiddy Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the McQuiddy Cemetery
  • Continue List   (1623 more) ...
    • Waite Cemetery
      (2 miles [3.2 km] to the north)
      • Note: The GPS coordinates that we are using for the Waite Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Waite Cemetery
    • Davis Cemetery
      (2 miles [3.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for the Davis Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Davis Cemetery
    • Brandon Cemetery
      (2 miles [3.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for the Brandon Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Brandon Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

While we didn't find Cascade Hollow in the Atlas, the following 1895 communities would have been found near the current location of Cascade Hollow.

These communities are listed based on their distance from Cascade Hollow, with the one closest to Cascade Hollow listed first.

  • Normandy
    (Less than 2 miles to the northwest)
    • Note: The GPS coordinates that we are using for Normandy have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Normandy
    • Normandy is located in Bedford County
    • Population from the 2020 Census: 140 people
    • Jump to TripAdvisor's Tourism page for Normandy <2>
  • Cortner
    (2 miles [3.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for Cortner have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cortner
    • Cortner is located in Bedford County
  • Haley
    (4 miles [6.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Haley have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Haley
    • Haley is located in Bedford County
  • Tullahoma
    (5 miles [8 km] to the south)
  • Singleton
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for Singleton have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Singleton
    • Singleton is located in Bedford County
  • Belmont
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for Belmont have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Belmont
    • Belmont is located in Coffee County
  • Wartrace
    (7 miles [11.3 km] to the northwest)
  • Fairfield
    (8 miles [12.9 km] to the north)
    • Note: The GPS coordinates that we are using for Fairfield have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fairfield
    • Fairfield is located in Bedford County
  • Flat Creek
    (9 miles [14.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Flat Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Flat Creek
    • Flat Creek is located in Bedford County
  • Manchester
    (9 miles [14.5 km] to the east)
  • Noah
    (9 miles [14.5 km] to the north)
    • Note: The GPS coordinates that we are using for Noah have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Noah
    • Noah is located in Coffee County
  • Countyline
    (10 miles [16.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Countyline have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Countyline
    • Countyline is located in Moore County
  • Continue List   (16 more) ...
    • Bell Buckle
      (11 miles [17.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bell Buckle
      • Bell Buckle is located in Bedford County
      • Population from the 2020 Census: 537 people
      • Jump to TripAdvisor's Tourism page for Bell Buckle <2>
    • Teal ‑ Historic
      (11 miles [17.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Teal have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Teal
      • Teal is located in Coffee County
    • Ridgeville
      (12 miles [19.3 km] to the south)
      • Note: The GPS coordinates that we are using for Ridgeville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ridgeville
      • Ridgeville is located in Moore County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Cascade Hollow. See our List of 1890's Communities around Cascade Hollow.

Unfortunately, we don't know of a website for Cascade Hollow. If you can help, please contact us through our Feedback Page.

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Cascade Hollow) to Point B.Our distance measurements begin at a specific point in Cascade Hollow. The point we use is located at these GPS coordinates - Latitude: 35.4438, Longitude: -86.2500    
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Cascade Hollow, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024