|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Caldwell in the Atlas, the following communities of the 1890's would have been found near the current location of Caldwell. The following communities are listed based on their distance, with the one closest to Caldwell listed first.
- Wartrace
(3 miles [4.8 km] to the northeast)
- Shelbyville
(4 miles [6.4 km] to the west)
- Haley
(4 miles [6.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Haley. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Haley
- Haley is located in Bedford County
- Singleton
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Singleton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Singleton
- Singleton is located in Bedford County
- Cortner
(6 miles [9.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Cortner. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Cortner
- Cortner is located in Bedford County
- Fairfield
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Fairfield have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairfield
- Fairfield is located in Bedford County
- Bell Buckle
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bell Buckle
- Bell Buckle is located in Bedford County
- Population from the 2020 Census: 537 people
- Jump to TripAdvisor's Tourism page for Bell Buckle <2>
- Flat Creek
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Flat Creek have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Flat Creek
- Flat Creek is located in Bedford County
- Normandy
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Normandy have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Normandy
- Normandy is located in Bedford County
- Population from the 2020 Census: 140 people
- Jump to TripAdvisor's Tourism page for Normandy <2>
- Vannatta
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Vannatta have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vannatta
- Vannatta is located in Bedford County
- Estimated population in 2014: 398 people
- Fall Creek
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Fall Creek have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fall Creek
- Fall Creek is located in Bedford County
- Pleasant Grove
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Pleasant Grove have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Grove
- Pleasant Grove is located in Bedford County
- Fosterville
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Fosterville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fosterville
- Fosterville is located in Rutherford County
- Bedford
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Bedford have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bedford
- Bedford is located in Bedford County
- Hawthorne
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Hawthorne have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hawthorne
- Hawthorne is located in Bedford County
- Noah
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Noah have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Noah
- Noah is located in Coffee County
- Beechgrove
(11 miles [17.7 km] to the northeast)
- Countyline
(12 miles [19.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Countyline. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Countyline
- Countyline is located in Moore County
- Midland
(12 miles [19.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Midland. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Midland
- Midland is located in Rutherford County
- Longview
(12 miles [19.3 km] to the northwest)
- Jump to our Gazetteer entry for Longview
- Longview is located in Bedford County
- Poplins Crossroads
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Poplins Crossroads have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Poplins Crossroads
- Poplins Crossroads is located in Bedford County
- Tullahoma
(13 miles [20.9 km] to the southeast)
- Wheel
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Wheel have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wheel
- Wheel is located in Bedford County
- Chestnut Ridge
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Chestnut Ridge have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chestnut Ridge
- Chestnut Ridge is located in Lincoln County
- Gossburg
(14 miles [22.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Gossburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Gossburg
- Gossburg is located in Coffee County
- Unionville
(14 miles [22.5 km] to the northwest)
Off-the-Road Links ...
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Caldwell, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|