RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Cocke County >> Brookside Mill >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Brookside Mill (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Brookside Mill. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Name Variations for Brookside Mill ...

When searching records, keep in mind that names and their spelling can change over time. Our sources include documents like maps, railroad schedules, Travel, Express and Shipping Guides. Many of these documents date from the 1800's and it's common to find spelling differences.

Although we can't give a definitive list, hopefully the following will give you a feel for the variations that might have occurred.

For example, a typical abbreviation for Brookside Mill: Brookside Ml. (or less commonly used: Brookside Mll.)

If you have information about these names (such as the reason for the change, date of change, the origin of the name), please Contact Us.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Brookside Mill is located in Cocke County.

To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Cocke County: Haywood (NC), Madison (NC), Greene, Hamblen, Jefferson & Sevier.

Below are the counties that are near Brookside Mill. For each of these counties, we show a sample of those communities that are closest to Brookside Mill:

  • Cocke County     (The home county of Brookside Mill)
    • The following are listed by their distance from Brookside Mill, with the one closest to Brookside Mill listed first.
    • Parrottsville
      (Less than 2 miles to the southeast)
      • Note: The GPS coordinates that we are using for Parrottsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Parrottsville
      • Parrottsville is located in Cocke County
      • Population from the 2020 Census: 283 people
      • Jump to TripAdvisor's Tourism page for Parrottsville <2>
    • Bridgeport
      (4 miles [6.4 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Bridgeport. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Bridgeport
      • Bridgeport is located in Cocke County
    • Bybee
      (5 miles [8 km] to the northwest)
    • West Myers
      (5 miles [8 km] to the south)
      • Note: The GPS coordinates that we are using for West Myers have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West Myers
      • West Myers is located in Cocke County
      • Estimated population in 2014: 2,282 people
    • Jimtown
      (5 miles [8 km] to the southwest)
      • Jump to our Gazetteer entry for Jimtown
      • Jimtown is located in Cocke County
    • Jaybird
      (6 miles [9.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Jaybird have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jaybird
      • Jaybird is located in Cocke County
      • Estimated population in 2014: 3,299 people
    • Newport
      (6 miles [9.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Newport have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Newport
      • Newport is located in Cocke County
      • Population from the 2020 Census: 6,894 people
      • Jump to TripAdvisor's Tourism page for Newport <2>
    • Del Rio
      (7 miles [11.3 km] to the southeast)
    • Edwina
      (8 miles [12.9 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Edwina. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Edwina
      • Edwina is located in Cocke County
    • Clevenger
      (9 miles [14.5 km] to the west)
      • Note: The GPS coordinates that we are using for Clevenger have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Clevenger
      • Clevenger is located in Cocke County
      • Estimated population in 2014: 43,182 people
    • Nough
      (10 miles [16.1 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Nough. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Nough
      • Nough is located in Cocke County
    • Wolf Creek
      (10 miles [16.1 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Wolf Creek. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Wolf Creek
      • Wolf Creek is located in Cocke County
  • Grainger County
    • The following are listed by their distance from Brookside Mill, with the one closest to Brookside Mill listed first.
    • Marshalls Ferry
      (23 miles [37 km] to the northwest)
      • Note: The GPS coordinates that we are using for Marshalls Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Marshalls Ferry
      • Marshalls Ferry is located in Grainger County
    • Wyatt Village
      (23 miles [37 km] to the northwest)
      • Note: The GPS coordinates that we are using for Wyatt Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wyatt Village
      • Wyatt Village is located in Grainger County
    • Bean Station
      (24 miles [38.6 km] to the northwest)
    • Dyers Ferry
      (24 miles [38.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Dyers Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dyers Ferry
      • Dyers Ferry is located in Grainger County
      • Estimated population in 2014: 16,839 people
    • Oakland
      (24 miles [38.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Oakland have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oakland
      • Oakland is located in Grainger County
      • Estimated population in 2014: 7,316 people
    • Wa-Ni Village
      (24 miles [38.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Wa-Ni Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wa-Ni Village
      • Wa-Ni Village is located in Grainger County
    • Beans
      (26 miles [41.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Beans have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beans
      • Beans is located in Grainger County
      • Estimated population in 2014: 3,084 people
    • Bowen
      (27 miles [43.5 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Bowen. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Bowen
      • Bowen is located in Grainger County
    • Massengill Mill
      (28 miles [45.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Massengill Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Massengill Mill
      • Massengill Mill is located in Grainger County
      • Estimated population in 2014: 1,600 people
    • Rutledge
      (29 miles [46.7 km] to the northwest)
    • Thorn Hill
      (29 miles [46.7 km] to the northwest)
      • Jump to our Gazetteer entry for Thorn Hill
      • Thorn Hill is located in Grainger County
  • Greene County
    • The following are listed by their distance from Brookside Mill, with the one closest to Brookside Mill listed first.
    • Sirenburg ‑ Historic
      (6 miles [9.7 km] to the east)
      • Note: The GPS coordinates that we are using for Sirenburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sirenburg
      • Sirenburg is located in Greene County
    • Warrensburg
      (7 miles [11.3 km] to the north)
      • Jump to our Gazetteer entry for Warrensburg
      • Warrensburg is located in Greene County
    • Bright Hope
      (8 miles [12.9 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Bright Hope. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Bright Hope
      • Bright Hope is located in Greene County
    • Little Chucky ‑ Historic
      (8 miles [12.9 km] to the northeast)
      • Note: The GPS coordinates that we are using for Little Chucky have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Little Chucky
      • Little Chucky is located in Greene County
    • Beulah
      (9 miles [14.5 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Beulah. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Beulah
      • Beulah is located in Greene County
    • Cedar Creek
      (10 miles [16.1 km] to the east)
      • Jump to our Gazetteer entry for Cedar Creek
      • Cedar Creek is located in Greene County
    • Midway
      (12 miles [19.3 km] to the northeast)
    • Mosheim
      (14 miles [22.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Mosheim have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mosheim
      • Mosheim is located in Greene County
      • Population from the 2020 Census: 2,357 people
      • Jump to TripAdvisor's Tourism page for Mosheim <2>
    • Marvin
      (16 miles [25.7 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Marvin. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Marvin
      • Marvin is located in Greene County
    • Albany
      (18 miles [29 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Albany. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Albany
      • Albany is located in Greene County
    • Greeneville
      (18 miles [29 km] to the northeast)
    • Camp Creek
      (19 miles [30.6 km] to the east)
      • Jump to our Gazetteer entry for Camp Creek
      • Camp Creek is located in Greene County
  • Hamblen County
    • The following are listed by their distance from Brookside Mill, with the one closest to Brookside Mill listed first.
    • Silver City
      (14 miles [22.5 km] to the north)
      • Note: The GPS coordinates that we are using for Silver City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Silver City
      • Silver City is located in Hamblen County
    • Monte Vista Estates
      (14 miles [22.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Monte Vista Estates have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Monte Vista Estates
      • Monte Vista Estates is located in Hamblen County
      • Estimated population in 2014: 2,860 people
    • East Village
      (16 miles [25.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for East Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for East Village
      • East Village is located in Hamblen County
    • Whitesburg
      (17 miles [27.4 km] to the north)
    • Morristown
      (17 miles [27.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Morristown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Morristown
      • Morristown is located in Hamblen County
      • Population from the 2020 Census: 30,275 people
      • Jump to TripAdvisor's Tourism page for Morristown <2>
    • Bright ‑ Historic
      (19 miles [30.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Bright have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bright
      • Bright is located in Hamblen County
      • Estimated population in 2014: 2,942 people
    • Casablanca
      (19 miles [30.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Casablanca have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Casablanca
      • Casablanca is located in Hamblen County
      • Estimated population in 2014: 2,223 people
    • Collons Ferry
      (23 miles [37 km] to the northwest)
      • Note: The GPS coordinates that we are using for Collons Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Collons Ferry
      • Collons Ferry is located in Hamblen County
      • Estimated population in 2014: 986 people
  • Hancock County
    • Yount Town
      (30 miles [48.3 km] to the north)
      • Jump to our Gazetteer entry for Yount Town
      • Yount Town is located in Hancock County
  • Hawkins County
    • The following are listed by their distance from Brookside Mill, with the one closest to Brookside Mill listed first.
    • Bulls Gap
      (17 miles [27.4 km] to the north)
      • Note: The GPS coordinates that we are using for Bulls Gap have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bulls Gap
      • Bulls Gap is located in Hawkins County
      • Population from the 2020 Census: 717 people
      • Jump to TripAdvisor's Tourism page for Bulls Gap <2>
    • Persia
      (22 miles [35.4 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Persia. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Persia
      • Persia is located in Hawkins County
    • Mooresburg
      (23 miles [37 km] to the north)
    • Red Bridge Ferry
      (23 miles [37 km] to the north)
      • Note: The GPS coordinates that we are using for Red Bridge Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Red Bridge Ferry
      • Red Bridge Ferry is located in Hawkins County
      • Estimated population in 2014: 1,135 people
    • Galbraith Springs
      (24 miles [38.6 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Galbraith Springs. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Galbraith Springs
      • Galbraith Springs is located in Hawkins County
    • Strahl
      (24 miles [38.6 km] to the north)
      • Jump to our Gazetteer entry for Strahl
      • Strahl is located in Hawkins County
    • Mooresburg Springs
      (25 miles [40.2 km] to the north)
      • Note: The GPS coordinates that we are using for Mooresburg Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mooresburg Springs
      • Mooresburg Springs is located in Hawkins County
      • Population from the 2010 Census: 941 people
    • Rogersville
      (27 miles [43.5 km] to the north)
    • Amis
      (28 miles [45.1 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Amis. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Amis
      • Amis is located in Hawkins County
    • Kepler
      (29 miles [46.7 km] to the northeast)
      • Jump to our Gazetteer entry for Kepler
      • Kepler is located in Hawkins County
  • Jefferson County
    • The following are listed by their distance from Brookside Mill, with the one closest to Brookside Mill listed first.
    • Leadvale
      (10 miles [16.1 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Leadvale. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Leadvale
      • Leadvale is located in Jefferson County
    • Baneberry
      (10 miles [16.1 km] to the west)
      • Note: The GPS coordinates that we are using for Baneberry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Baneberry
      • Baneberry is located in Jefferson County
      • Population from the 2020 Census: 540 people
      • Jump to TripAdvisor's Tourism page for Baneberry <2>
    • White Pine
      (12 miles [19.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for White Pine have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for White Pine
      • White Pine is located in Jefferson County
      • Population from the 2020 Census: 2,634 people
      • Jump to TripAdvisor's Tourism page for White Pine <2>
    • Edna
      (16 miles [25.7 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Edna. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Edna
      • Edna is located in Jefferson County
    • Dandridge
      (18 miles [29 km] to the west)
      • Note: The GPS coordinates that we are using for Dandridge have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dandridge
      • Dandridge is located in Jefferson County
      • Population from the 2020 Census: 3,182 people
      • Jump to TripAdvisor's Tourism page for Dandridge <2>
    • Talbott
      (20 miles [32.2 km] to the northwest)
    • Rock Town
      (21 miles [33.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Rock Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rock Town
      • Rock Town is located in Jefferson County
    • Flat Gap
      (21 miles [33.8 km] to the west)
      • Jump to our Gazetteer entry for Flat Gap
      • Flat Gap is located in Jefferson County
    • Alena ‑ Historic
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for Alena have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Alena
      • Alena is located in Jefferson County
    • Jefferson City
      (23 miles [37 km] to the west)
    • Piedmont
      (24 miles [38.6 km] to the west)
      • Jump to our Gazetteer entry for Piedmont
      • Piedmont is located in Jefferson County
    • Dumplin
      (25 miles [40.2 km] to the west)
      • Jump to our Gazetteer entry for Dumplin
      • Dumplin is located in Jefferson County
  • Sevier County
    • The following are listed by their distance from Brookside Mill, with the one closest to Brookside Mill listed first.
    • East Fork
      (21 miles [33.8 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for East Fork. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for East Fork
      • East Fork is located in Sevier County
    • Harrisburg
      (24 miles [38.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Harrisburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harrisburg
      • Harrisburg is located in Sevier County
      • Estimated population in 2014: 6,219 people
    • Pittman Center
      (24 miles [38.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Pittman Center have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pittman Center
      • Pittman Center is located in Sevier County
      • Population from the 2020 Census: 545 people
    • Millican Grove
      (24 miles [38.6 km] to the west)
      • Jump to our Gazetteer entry for Millican Grove
      • Millican Grove is located in Sevier County
    • Sevierville
      (27 miles [43.5 km] to the west)
    • Middle Creek
      (28 miles [45.1 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Middle Creek. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Middle Creek
      • Middle Creek is located in Sevier County
    • Catlettsburg
      (28 miles [45.1 km] to the west)
      • Jump to our Gazetteer entry for Catlettsburg
      • Catlettsburg is located in Sevier County
    • Henry Crossroads
      (28 miles [45.1 km] to the west)
      • Jump to our Gazetteer entry for Henry Crossroads
      • Henry Crossroads is located in Sevier County
    • Kodak
      (29 miles [46.7 km] to the west)
      • Note: The GPS coordinates that we are using for Kodak have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kodak
      • Kodak is located in Sevier County
      • Estimated population in 2014: 184,281 people
      • Jump to TripAdvisor's Tourism page for Kodak <2>
    • Pigeon Forge
      (30 miles [48.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Pigeon Forge have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pigeon Forge
      • Pigeon Forge is located in Sevier County
      • Population from the 2020 Census: 6,237 people
      • Jump to TripAdvisor's Tourism page for Pigeon Forge <2>
  • Unicoi County
    • Flag Pond
      (30 miles [48.3 km] to the east)
      • Jump to our Gazetteer entry for Flag Pond
      • Flag Pond is located in Unicoi County
  • Washington County
    • The following are listed by their distance from Brookside Mill, with the one closest to Brookside Mill listed first.
    • Limestone
      (29 miles [46.7 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Limestone. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Limestone
      • Limestone is located in Washington County
      • Jump to TripAdvisor's Tourism page for Limestone <2>
    • Nolichucky ‑ Historic
      (30 miles [48.3 km] to the east)
      • Note: The GPS coordinates that we are using for Nolichucky have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nolichucky
      • Nolichucky is located in Washington County
      • Population from the 2010 Census: 5,861 people
  • Buncombe County (NC)
    • Sandymush
      (28 miles [45.1 km] to the southeast)
      • Jump to our Gazetteer entry for Sandymush
      • Sandymush is located in Buncombe County (NC)
      • Sandymush has also been known as:
      • Sandy Mush
  • Haywood County (NC)
    • The following are listed by their distance from Brookside Mill, with the one closest to Brookside Mill listed first.
    • Mount Sterling
      (17 miles [27.4 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Mount Sterling. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Mount Sterling
      • Mount Sterling is located in Haywood County (NC)
    • Teague ‑ Historic
      (25 miles [40.2 km] to the south)
      • Note: The GPS coordinates that we are using for Teague have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Teague
      • Teague is located in Haywood County (NC)
  • Madison County (NC)
    • The following are listed by their distance from Brookside Mill, with the one closest to Brookside Mill listed first.
    • Hot Springs
      (17 miles [27.4 km] to the southeast)
    • Lynch ‑ Historic
      (17 miles [27.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Lynch have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lynch
      • Lynch is located in Madison County (NC)
    • Bluff
      (18 miles [29 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Bluff. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Bluff
      • Bluff is located in Madison County (NC)
    • Allenstand
      (19 miles [30.6 km] to the east)
      • Jump to our Gazetteer entry for Allenstand
      • Allenstand is located in Madison County (NC)
    • Hurricane
      (20 miles [32.2 km] to the east)
      • Jump to our Gazetteer entry for Hurricane
      • Hurricane is located in Madison County (NC)
    • Spring Creek
      (20 miles [32.2 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Spring Creek. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Spring Creek
      • Spring Creek is located in Madison County (NC)
    • Stackhouse
      (20 miles [32.2 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Stackhouse. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Stackhouse
      • Stackhouse is located in Madison County (NC)
    • Chapel Hill
      (22 miles [35.4 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Chapel Hill. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Chapel Hill
      • Chapel Hill is located in Madison County (NC)
    • White Rock
      (22 miles [35.4 km] to the east)
      • Jump to our Gazetteer entry for White Rock
      • White Rock is located in Madison County (NC)
    • Trust
      (22 miles [35.4 km] to the southeast)
      • Jump to our Gazetteer entry for Trust
      • Trust is located in Madison County (NC)
    • Cutshalltown
      (23 miles [37 km] to the east)
      • Jump to our Gazetteer entry for Cutshalltown
      • Cutshalltown is located in Madison County (NC)
    • Walnut
      (23 miles [37 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Walnut. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Walnut
      • Walnut is located in Madison County (NC)

For an expanded list of the communities that are closest to Brookside Mill, see our County-by-County Page for Brookside Mill.

Cemeteries Near Brookside Mill ...

Below are cemeteries that are in the vicinity of Brookside Mill.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Brookside Mill covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Brookside Mill, with the one closest to Brookside Mill listed first.

  • Ottinger Cemetery
    (Less than 2 miles to the southwest)
    • Jump to our Gazetteer entry for the Ottinger Cemetery
    • Note: The GPS coordinates that we are using for the Ottinger Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Faubion Cemetery
    (2 miles [3.2 km] to the southeast)
    • Jump to our Gazetteer entry for the Faubion Cemetery
    • Note: The GPS coordinates that we are using for the Faubion Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Harneds Chapel Graveyard
    (2 miles [3.2 km] to the north)
    • Jump to our Gazetteer entry for the Harneds Chapel Graveyard
    • Note: The GPS coordinates that we are using for the Harneds Chapel Graveyard have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Susong Cemetery
    (3 miles [4.8 km] to the south)
    • Jump to our Gazetteer entry for the Susong Cemetery
    • Note: The GPS coordinates that we are using for the Susong Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • O'Dell Cemetery
    (4 miles [6.4 km] to the southwest)
    • Jump to our Gazetteer entry for the O'Dell Cemetery
    • Note: The GPS coordinates that we are using for the O'Dell Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • McNabb Cemetery
    (4 miles [6.4 km] to the south)
    • Jump to our Gazetteer entry for the McNabb Cemetery
    • Note: The GPS coordinates that we are using for the McNabb Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Jack Cemetery
    (5 miles [8 km] to the west)
    • Jump to our Gazetteer entry for the Jack Cemetery
    • Note: The GPS coordinates that we are using for the Jack Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Stokely's Chapel Baptist Church Cemetery
    (5 miles [8 km] to the west)
  • Kilgore Cemetery
    (5 miles [8 km] to the southeast)
    • Jump to our Gazetteer entry for the Kilgore Cemetery
    • Note: The GPS coordinates that we are using for the Kilgore Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Union Cemetery
    (6 miles [9.7 km] to the southwest)
    • Jump to our Gazetteer entry for the Union Cemetery
    • Note: The GPS coordinates that we are using for the Union Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Smith Cemetery
    (6 miles [9.7 km] to the south)
    • Jump to our Gazetteer entry for the Smith Cemetery
    • Note: The GPS coordinates that we are using for the Smith Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Inman Cemetery
    (6 miles [9.7 km] to the south)
    • Jump to our Gazetteer entry for the Inman Cemetery
    • Note: The GPS coordinates that we are using for the Inman Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Continue List   (780 more) ...
    • Slate Creek Cemetery
      (6 miles [9.7 km] to the northwest)
      • Jump to our Gazetteer entry for the Slate Creek Cemetery
      • Note: The GPS coordinates that we are using for the Slate Creek Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Nichols Cemetery
      (7 miles [11.3 km] to the west)
      • Jump to our Gazetteer entry for the Nichols Cemetery
      • Note: The GPS coordinates that we are using for the Nichols Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to Find-A-Grave: FG ID #2589719 <4>
    • Allen Cemetery
      (7 miles [11.3 km] to the west)
      • Jump to our Gazetteer entry for the Allen Cemetery
      • Note: The GPS coordinates that we are using for the Allen Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

While we didn't find Brookside Mill in the Atlas, the following 1895 communities would have been found near the current location of Brookside Mill.

These communities are listed based on their distance from Brookside Mill, with the one closest to Brookside Mill listed first.

  • Parrottsville
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for Parrottsville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Parrottsville
    • Parrottsville is located in Cocke County
    • Population from the 2020 Census: 283 people
    • Jump to TripAdvisor's Tourism page for Parrottsville <2>
  • Salem
    (3 miles [4.8 km] to the east)
    • Note: The GPS coordinates that we are using for Salem have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Salem
    • Salem is located in Cocke County
  • Oldtown
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Oldtown have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oldtown
    • Oldtown is located in Cocke County
  • Bridgeport
    (4 miles [6.4 km] to the southwest)
    • Note: We haven't been able to verify our GPS coordinates for Bridgeport. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Bridgeport
    • Bridgeport is located in Cocke County
  • Ottinger
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Ottinger have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ottinger
    • Ottinger is located in Cocke County
  • Bybee
    (5 miles [8 km] to the northwest)
  • Newport
    (6 miles [9.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Newport have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Newport
    • Newport is located in Cocke County
    • Population from the 2020 Census: 6,894 people
    • Jump to TripAdvisor's Tourism page for Newport <2>
  • Sirenburg ‑ Historic
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for Sirenburg have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sirenburg
    • Sirenburg is located in Greene County
  • Caney Branch
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for Caney Branch have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Caney Branch
    • Caney Branch is located in Greene County
  • Pate Hill
    (6 miles [9.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Pate Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pate Hill
    • Pate Hill is located in Greene County
  • Del Rio
    (7 miles [11.3 km] to the southeast)
  • Warrensburg
    (7 miles [11.3 km] to the north)
    • Jump to our Gazetteer entry for Warrensburg
    • Warrensburg is located in Greene County
  • Continue List   (14 more) ...
    • Rankin
      (7 miles [11.3 km] to the west)
      • Note: The GPS coordinates that we are using for Rankin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rankin
      • Rankin is located in Cocke County
    • Edwina
      (8 miles [12.9 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Edwina. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Edwina
      • Edwina is located in Cocke County
    • Bright Hope
      (8 miles [12.9 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Bright Hope. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Bright Hope
      • Bright Hope is located in Greene County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Brookside Mill. See our List of 1890's Communities around Brookside Mill.

Newspapers Published in Brookside Mill ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 19 newspapers that have been published in the area around Brookside Mill.

Although we're unaware of any newspapers that were published in the immediate area of Brookside Mill, there are papers which were published within 6 miles [9.7 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Brookside Mill.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Brookside Mill:

Unfortunately, we don't know of a website for Brookside Mill. If you can help, please contact us through our Feedback Page.

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Brookside Mill, please let us know so that we can improve our accuracy.
<6>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Brookside Mill) to Point B.Our distance measurements begin at a specific point in Brookside Mill. The point we use is located at these GPS coordinates - Latitude: 36.0157, Longitude: -83.0974       In this case, the coordinates for Brookside Mill have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 29 Apr 2025