RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Hawkins County >> Brookshire Hills >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Brookshire Hills (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Brookshire Hills. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most doctors and hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Brookshire Hills is located in Hawkins County.

To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Hawkins County: Grainger, Greene, Hamblen, Hancock, Sullivan, Washington, Lee (VA) & Scott (VA).

Below are the counties that are near Brookshire Hills. For each of these counties, we show a sample of those communities that are closest to Brookshire Hills:

  • Hawkins County     (The home county of Brookshire Hills)
    • The following are listed by their distance from Brookshire Hills, with the one closest to Brookshire Hills listed first.
    • Frisco
      (Less than 2 miles to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Frisco. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Frisco
      • Frisco is located in Hawkins County
    • Waycross
      (Less than 2 miles to the northwest)
      • Note: The GPS coordinates that we are using for Waycross have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Waycross
      • Waycross is located in Hawkins County
      • Estimated population in 2014: 4,091 people
    • Solitude ‑ Historic
      (2 miles [3.2 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Solitude. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Solitude
      • Solitude is located in Hawkins County
    • Rotherwood
      (2 miles [3.2 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Rotherwood. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Rotherwood
      • Rotherwood is located in Hawkins County
    • Mount Carmel
      (2 miles [3.2 km] to the southwest)
    • Block City
      (3 miles [4.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Block City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Block City
      • Block City is located in Hawkins County
    • Green Village
      (3 miles [4.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Green Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Green Village
      • Green Village is located in Hawkins County
    • Church Hill
      (5 miles [8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Church Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Church Hill
      • Church Hill is located in Hawkins County
      • Population from the 2020 Census: 6,643 people
      • Jump to TripAdvisor's Tourism page for Church Hill <3>
    • New Canton
      (7 miles [11.3 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for New Canton. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for New Canton
      • New Canton is located in Hawkins County
    • Greenland
      (9 miles [14.5 km] to the southwest)
      • Jump to our Gazetteer entry for Greenland
      • Greenland is located in Hawkins County
    • Blossom
      (10 miles [16.1 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Blossom. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Blossom
      • Blossom is located in Hawkins County
    • Chimneytop ‑ Historic
      (13 miles [20.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for Chimneytop have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chimneytop
      • Chimneytop is located in Hawkins County
    • Surgoinsville
      (14 miles [22.5 km] to the southwest)
  • Carter County
    • The following are listed by their distance from Brookshire Hills, with the one closest to Brookshire Hills listed first.
    • Watauga
      (24 miles [38.6 km] to the southeast)
      • Jump to our Gazetteer entry for Watauga
      • Watauga is located in Carter County
      • Population from the 2020 Census: 373 people
    • Central
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Central have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Central
      • Central is located in Carter County
    • Pine Crest
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Pine Crest have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pine Crest
      • Pine Crest is located in Carter County
    • Biltmore
      (27 miles [43.5 km] to the southeast)
      • Jump to our Gazetteer entry for Biltmore
      • Biltmore is located in Carter County
    • Elizabethton
      (28 miles [45.1 km] to the southeast)
    • Hunter
      (30 miles [48.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Hunter have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hunter
      • Hunter is located in Carter County
  • Greene County
    • The following are listed by their distance from Brookshire Hills, with the one closest to Brookshire Hills listed first.
    • Jearoldstown
      (15 miles [24.1 km] to the south)
      • Jump to our Gazetteer entry for Jearoldstown
      • Jearoldstown is located in Greene County
    • Milburnton
      (18 miles [29 km] to the south)
      • Jump to our Gazetteer entry for Milburnton
      • Milburnton is located in Greene County
    • Baileyton
      (20 miles [32.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Baileyton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Baileyton
      • Baileyton is located in Greene County
      • Population from the 2020 Census: 456 people
      • Jump to TripAdvisor's Tourism page for Baileyton <3>
    • Centersville
      (21 miles [33.8 km] to the south)
      • Jump to our Gazetteer entry for Centersville
      • Centersville is located in Greene County
    • Rheatown
      (24 miles [38.6 km] to the south)
      • Jump to our Gazetteer entry for Rheatown
      • Rheatown is located in Greene County
    • Morelock ‑ Historic
      (24 miles [38.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Morelock have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Morelock
      • Morelock is located in Greene County
    • Fairview
      (25 miles [40.2 km] to the south)
      • Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fairview
      • Fairview is located in Greene County
    • Ottway
      (25 miles [40.2 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Ottway. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Ottway
      • Ottway is located in Greene County
    • Romeo
      (25 miles [40.2 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Romeo. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Romeo
      • Romeo is located in Greene County
    • Afton
      (27 miles [43.5 km] to the south)
    • Albany
      (27 miles [43.5 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Albany. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Albany
      • Albany is located in Greene County
    • Bolton Estates
      (28 miles [45.1 km] to the south)
      • Note: The GPS coordinates that we are using for Bolton Estates have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bolton Estates
      • Bolton Estates is located in Greene County
      • Estimated population in 2014: 5,152 people
    • Horse Creek
      (28 miles [45.1 km] to the south)
      • Note: The GPS coordinates that we are using for Horse Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Horse Creek
      • Horse Creek is located in Greene County
      • Estimated population in 2014: 284 people
  • Hancock County
    • The following are listed by their distance from Brookshire Hills, with the one closest to Brookshire Hills listed first.
    • Willis
      (20 miles [32.2 km] to the west)
      • Note: The GPS coordinates that we are using for Willis have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Willis
      • Willis is located in Hancock County
      • Estimated population in 2014: 387 people
    • Kyles Ford
      (22 miles [35.4 km] to the west)
  • Sullivan County
    • The following are listed by their distance from Brookshire Hills, with the one closest to Brookshire Hills listed first.
    • Beartown
      (2 miles [3.2 km] to the east)
      • Jump to our Gazetteer entry for Beartown
      • Beartown is located in Sullivan County
    • Morrison City
      (3 miles [4.8 km] to the east)
      • Note: The GPS coordinates that we are using for Morrison City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Morrison City
      • Morrison City is located in Sullivan County
    • Cherokee Village
      (4 miles [6.4 km] to the east)
      • Note: The GPS coordinates that we are using for Cherokee Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cherokee Village
      • Cherokee Village is located in Sullivan County
    • Horace ‑ Historic
      (6 miles [9.7 km] to the east)
      • Note: The GPS coordinates that we are using for Horace have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Horace
      • Horace is located in Sullivan County
    • Borden Village
      (6 miles [9.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Borden Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Borden Village
      • Borden Village is located in Sullivan County
    • Kingsport
      (6 miles [9.7 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Kingsport. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Kingsport
      • Kingsport is located in Sullivan County
      • Population from the 2020 Census: 54,112 people
      • Jump to TripAdvisor's Tourism page for Kingsport <3>
    • Beechwood Village
      (7 miles [11.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Beechwood Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beechwood Village
      • Beechwood Village is located in Sullivan County
    • Bloomingdale
      (8 miles [12.9 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Bloomingdale. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Bloomingdale
      • Bloomingdale is located in Sullivan County
      • Population from the 2010 Census: 9,888 people
    • Orebank
      (9 miles [14.5 km] to the east)
      • Jump to our Gazetteer entry for Orebank
      • Orebank is located in Sullivan County
    • Blair Gap
      (9 miles [14.5 km] to the south)
      • Note: The GPS coordinates that we are using for Blair Gap have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blair Gap
      • Blair Gap is located in Sullivan County
      • Estimated population in 2014: 1,870 people
    • Colonial Heights
      (10 miles [16.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Colonial Heights have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Colonial Heights
      • Colonial Heights is located in Sullivan County
      • Population from the 2010 Census: 6,934 people
      • Jump to TripAdvisor's Tourism page for Colonial Heights <3>
    • Kendrick Creek ‑ Historic
      (10 miles [16.1 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Kendrick Creek. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Kendrick Creek
      • Kendrick Creek is located in Sullivan County
    • Fordtown
      (11 miles [17.7 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Fordtown. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Fordtown
      • Fordtown is located in Sullivan County
  • Unicoi County
    • The following are listed by their distance from Brookshire Hills, with the one closest to Brookshire Hills listed first.
    • Bumpus Cove
      (30 miles [48.3 km] to the south)
      • Note: The GPS coordinates that we are using for Bumpus Cove have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bumpus Cove
      • Bumpus Cove is located in Unicoi County
      • Estimated population in 2014: 729 people
    • Whispering Pines
      (30 miles [48.3 km] to the southeast)
      • Jump to our Gazetteer entry for Whispering Pines
      • Whispering Pines is located in Unicoi County
  • Washington County
    • The following are listed by their distance from Brookshire Hills, with the one closest to Brookshire Hills listed first.
    • Fall Branch
      (11 miles [17.7 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Fall Branch. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Fall Branch
      • Fall Branch is located in Washington County
      • Population from the 2010 Census: 1,291 people
      • Jump to TripAdvisor's Tourism page for Fall Branch <3>
    • Harmony
      (13 miles [20.9 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Harmony. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Harmony
      • Harmony is located in Washington County
    • Wheelocktown ‑ Historic
      (13 miles [20.9 km] to the southeast)
      • Jump to our Gazetteer entry for Wheelocktown
      • Wheelocktown is located in Washington County
    • Gray
      (14 miles [22.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Gray have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gray
      • Gray is located in Washington County
      • Jump to TripAdvisor's Tourism page for Gray <3>
    • Spurgeon
      (14 miles [22.5 km] to the southeast)
      • Jump to our Gazetteer entry for Spurgeon
      • Spurgeon is located in Washington County
      • Population from the 2010 Census: 3,957 people
    • Locust Mount
      (16 miles [25.7 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Locust Mount. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Locust Mount
      • Locust Mount is located in Washington County
    • Oak Grove
      (16 miles [25.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Oak Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oak Grove
      • Oak Grove is located in Washington County
    • Ducktown
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Ducktown have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ducktown
      • Ducktown is located in Washington County
      • Estimated population in 2014: 457 people
    • Flourville
      (18 miles [29 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Flourville. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Flourville
      • Flourville is located in Washington County
    • Big Sandy
      (19 miles [30.6 km] to the south)
      • Note: The GPS coordinates that we are using for Big Sandy have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Big Sandy
      • Big Sandy is located in Washington County
      • Estimated population in 2014: 542 people
    • Bowmantown
      (19 miles [30.6 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Bowmantown. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Bowmantown
      • Bowmantown is located in Washington County
      • Population from the 2010 Census: 302 people
    • Austin Village
      (21 miles [33.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Austin Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Austin Village
      • Austin Village is located in Washington County
    • Camelot Two
      (21 miles [33.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Camelot Two have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Camelot Two
      • Camelot Two is located in Washington County
      • Estimated population in 2014: 3,582 people
  • Harlan County (KY)
    • The following are listed by their distance from Brookshire Hills, with the one closest to Brookshire Hills listed first.
    • Holmes Mill
      (28 miles [45.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Holmes Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Holmes Mill
      • Holmes Mill is located in Harlan County (KY)
    • Lynch
      (30 miles [48.3 km] to the northwest)
      • Jump to our Gazetteer entry for Lynch
      • Lynch is located in Harlan County (KY)
      • Population from the 2020 Census: 630 people
      • Jump to TripAdvisor's Tourism page for Lynch <3>

For an expanded list of the communities that are closest to Brookshire Hills, see our County-by-County Page for Brookshire Hills.

Cemeteries Near Brookshire Hills ...

Below are cemeteries that are in the vicinity of Brookshire Hills.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Brookshire Hills covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Brookshire Hills, with the one closest to Brookshire Hills listed first.

  • Bellamy Cemetery
    (Less than 2 miles to the south)
    • Jump to our Gazetteer entry for the Bellamy Cemetery
    • Note: The GPS coordinates that we are using for the Bellamy Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Sensabaugh Cemetery
    (Less than 2 miles to the east)
    • Jump to our Gazetteer entry for the Sensabaugh Cemetery
    • Note: The GPS coordinates that we are using for the Sensabaugh Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Francisco Cemetery
    (Less than 2 miles to the northeast)
    • Jump to our Gazetteer entry for the Francisco Cemetery
    • Note: The GPS coordinates that we are using for the Francisco Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Wills Cemetery
    (Less than 2 miles to the southwest)
  • Martin Cemetery
    (Less than 2 miles to the east)
    • Jump to our Gazetteer entry for the Martin Cemetery
    • Note: The GPS coordinates that we are using for the Martin Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Click Cemetery
    (Less than 2 miles to the east)
    • Jump to our Gazetteer entry for the Click Cemetery
    • Note: The GPS coordinates that we are using for the Click Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Bellamy Cemetery
    (Less than 2 miles to the northwest)
    • Jump to our Gazetteer entry for the Bellamy Cemetery
    • Note: The GPS coordinates that we are using for the Bellamy Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Bellamy Cemetery
    (Less than 2 miles to the northwest)
    • Jump to our Gazetteer entry for the Bellamy Cemetery
    • Note: The GPS coordinates that we are using for the Bellamy Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Bussell Cemetery
    (Less than 2 miles to the west)
    • Jump to our Gazetteer entry for the Bussell Cemetery
    • Note: The GPS coordinates that we are using for the Bussell Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Kinkead Cemetery
    (Less than 2 miles to the west)
    • Jump to our Gazetteer entry for the Kinkead Cemetery
    • Note: The GPS coordinates that we are using for the Kinkead Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Click Cemetery
    (2 miles [3.2 km] to the southwest)
    • Jump to our Gazetteer entry for the Click Cemetery
    • Note: The GPS coordinates that we are using for the Click Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Liberty Hill Cemetery
    (2 miles [3.2 km] to the south)
    • Jump to our Gazetteer entry for the Liberty Hill Cemetery
    • Note: The GPS coordinates that we are using for the Liberty Hill Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Continue List   (780 more) ...
    • Phipps Cemetery
      (2 miles [3.2 km] to the southeast)
      • Jump to our Gazetteer entry for the Phipps Cemetery
      • Note: The GPS coordinates that we are using for the Phipps Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Foust Cemetery
      (2 miles [3.2 km] to the southeast)
      • Jump to our Gazetteer entry for the Foust Cemetery
      • Note: The GPS coordinates that we are using for the Foust Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Bear Cemetery
      (2 miles [3.2 km] to the east)
      • Jump to our Gazetteer entry for the Bear Cemetery
      • Note: The GPS coordinates that we are using for the Bear Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

While we didn't find Brookshire Hills in the Atlas, the following 1895 communities would have been found near the current location of Brookshire Hills.

These communities are listed based on their distance from Brookshire Hills, with the one closest to Brookshire Hills listed first.

  • Solitude ‑ Historic
    (2 miles [3.2 km] to the south)
    • Note: We haven't been able to verify our GPS coordinates for Solitude. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Solitude
    • Solitude is located in Hawkins County
  • Rotherwood
    (2 miles [3.2 km] to the southeast)
    • Note: We haven't been able to verify our GPS coordinates for Rotherwood. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Rotherwood
    • Rotherwood is located in Hawkins County
  • Church Hill
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Church Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Church Hill
    • Church Hill is located in Hawkins County
    • Population from the 2020 Census: 6,643 people
    • Jump to TripAdvisor's Tourism page for Church Hill <3>
  • Butterfly ‑ Historic
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Butterfly have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Butterfly
    • Butterfly is located in Sullivan County
  • Kingsport
    (6 miles [9.7 km] to the southeast)
    • Note: We haven't been able to verify our GPS coordinates for Kingsport. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Kingsport
    • Kingsport is located in Sullivan County
    • Population from the 2020 Census: 54,112 people
    • Jump to TripAdvisor's Tourism page for Kingsport <3>
  • Horace ‑ Historic
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for Horace have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Horace
    • Horace is located in Sullivan County
  • New Canton
    (7 miles [11.3 km] to the southwest)
    • Note: We haven't been able to verify our GPS coordinates for New Canton. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for New Canton
    • New Canton is located in Hawkins County
  • Eden Ridge ‑ Historic
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Eden Ridge have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Eden Ridge
    • Eden Ridge is located in Sullivan County
  • Opossum ‑ Historic
    (7 miles [11.3 km] to the west)
    • Note: The GPS coordinates that we are using for Opossum have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Opossum
    • Opossum is located in Hawkins County
  • Harbour
    (8 miles [12.9 km] to the south)
    • Note: The GPS coordinates that we are using for Harbour have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Harbour
    • Harbour is located in Sullivan County
  • Cloverbottom ‑ Historic
    (8 miles [12.9 km] to the south)
    • Note: The GPS coordinates that we are using for Cloverbottom have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cloverbottom
    • Cloverbottom is located in Sullivan County
  • Bloomingdale
    (8 miles [12.9 km] to the east)
    • Note: We haven't been able to verify our GPS coordinates for Bloomingdale. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Bloomingdale
    • Bloomingdale is located in Sullivan County
    • Population from the 2010 Census: 9,888 people
  • Continue List   (14 more) ...
    • Mole
      (9 miles [14.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Mole have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mole
      • Mole is located in Hawkins County
    • Hemlock
      (9 miles [14.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Hemlock have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hemlock
      • Hemlock is located in Sullivan County
    • Orebank
      (9 miles [14.5 km] to the east)
      • Jump to our Gazetteer entry for Orebank
      • Orebank is located in Sullivan County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Brookshire Hills. See our List of 1890's Communities around Brookshire Hills.

Newspapers Published in Brookshire Hills ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 12 newspapers that have been published in the area around Brookshire Hills.

Although we're unaware of any newspapers that were published in the immediate area of Brookshire Hills, there are papers which were published within 6 miles [9.7 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Brookshire Hills.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Brookshire Hills:

Unfortunately, we don't know of a website for Brookshire Hills. If you can help, please contact us through our Feedback Page.

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Brookshire Hills, please let us know so that we can improve our accuracy.
<5>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Brookshire Hills) to Point B.Our distance measurements begin at a specific point in Brookshire Hills. The point we use is located at these GPS coordinates - Latitude: 36.5820, Longitude: -82.6418       In this case, the coordinates for Brookshire Hills have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 29 Apr 2025