|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Spring Valley had a population of 12 people in 1895 with a post office and no railroad service. In 2000, Spring Valley had a population of 167 people.
The following communities are listed based on their distance from Spring Valley, with the one closest to Spring Valley listed first.
- Mayfield
(8 miles [12.9 km] to the south)
- Jump to our Gazetteer entry for Mayfield
- Mayfield is located in Yankton County
- Estimated population in 2014: 208 people
- Hurley
(10 miles [16.1 km] to the northeast)
- Jamesville
(12 miles [19.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Jamesville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Jamesville
- Jamesville is located in Yankton County
- Estimated population in 2014: 232 people
- Freeman
(13 miles [20.9 km] to the northwest)
- Parker
(14 miles [22.5 km] to the northeast)
- Wakonda
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Wakonda have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wakonda
- Wakonda is located in Clay County
- Population from the 2020 Census: 296 people
- Jump to TripAdvisor's Tourism page for Wakonda <2>
- Marion
(15 miles [24.1 km] to the north)
- Menno
(15 miles [24.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Menno. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Menno
- Menno is located in Hutchinson County
- Population from the 2020 Census: 615 people
- Jump to TripAdvisor's Tourism page for Menno <2>
- Volin
(17 miles [27.4 km] to the south)
- Lesterville
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Lesterville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lesterville
- Lesterville is located in Yankton County
- Population from the 2020 Census: 130 people
- Jump to TripAdvisor's Tourism page for Lesterville <2>
- Utica
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Utica have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Utica
- Utica is located in Yankton County
- Population from the 2020 Census: 67 people
- Jump to TripAdvisor's Tourism page for Utica <2>
- Riverside ‑ Historic
(19 miles [30.6 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Riverside. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Riverside
- Riverside is located in Clay County
- Monroe
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Monroe have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monroe
- Monroe is located in Turner County
- Population from the 2020 Census: 156 people
- Jump to TripAdvisor's Tourism page for Monroe <2>
- Lodi
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Lodi have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lodi
- Lodi is located in Clay County
- Estimated population in 2014: 82 people
- Olivet
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Olivet have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Olivet
- Olivet is located in Hutchinson County
- Population from the 2020 Census: 70 people
- Jump to TripAdvisor's Tourism page for Olivet <2>
- Komstad ‑ Historic
(21 miles [33.8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Komstad. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Komstad
- Komstad is located in Clay County
- Estimated population in 2014: 12 people
- Lennox
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Lennox have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lennox
- Lennox is located in Lincoln County
- Population from the 2020 Census: 2,500 people
- Jump to TripAdvisor's Tourism page for Lennox <2>
- Gayville
(22 miles [35.4 km] to the south)
- Yankton
(23 miles [37 km] to the south)
- Scotland
(23 miles [37 km] to the west)
- Note: The GPS coordinates that we are using for Scotland have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Scotland
- Scotland is located in Bon Homme County
- Population from the 2020 Census: 792 people
- Jump to TripAdvisor's Tourism page for Scotland <2>
- Dalesburg
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Dalesburg have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dalesburg
- Dalesburg is located in Clay County
- Lakeport
(25 miles [40.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Lakeport have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lakeport
- Lakeport is located in Yankton County
- Bloomingdale
(25 miles [40.2 km] to the southeast)
- Jump to our Gazetteer entry for Bloomingdale
- Bloomingdale is located in Clay County
- Marshalltown ‑ Historic
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Marshalltown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marshalltown
- Marshalltown is located in Clay County
- Tabor
(26 miles [41.8 km] to the southwest)
- Aten
(26 miles [41.8 km] to the south)
- Jump to our Gazetteer entry for Aten
- Aten is located in Cedar County (NE)
- Meckling
(26 miles [41.8 km] to the southeast)
- Beresford
(26 miles [41.8 km] to the east)
- Jump to our Gazetteer entry for Beresford
- Beresford is located in Union County
- Population from the 2020 Census: 2,043 people
- Former name for Beresford:
- Paris
- Jump to TripAdvisor's Tourism page for Beresford <2>
- Bridgewater
(26 miles [41.8 km] to the northwest)
- Worthing
(26 miles [41.8 km] to the east)
Off-the-Road Links ...
The official website for State of South Dakota: https://www.sd.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Spring Valley, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|