RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of South Dakota >> McCook County >> Rumpus Ridge >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
South Dakota

The Commemorative Quarter for South Dakota





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Rumpus Ridge in the Atlas, the following communities of the 1890's would have been found near the current location of Rumpus Ridge. The following communities are listed based on their distance, with the one closest to Rumpus Ridge listed first.

  • Canistota
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Canistota have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Canistota
    • Canistota is located in McCook County
    • Population from the 2020 Census: 620 people
    • Jump to TripAdvisor's Tourism page for Canistota <3>
  • Monroe
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Monroe have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Monroe
    • Monroe is located in Turner County
    • Population from the 2020 Census: 156 people
    • Jump to TripAdvisor's Tourism page for Monroe <3>
  • Humboldt
    (7 miles [11.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Humboldt have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Humboldt
    • Humboldt is located in Minnehaha County
    • Population from the 2020 Census: 568 people
    • Jump to TripAdvisor's Tourism page for Humboldt <3>
  • Montrose
    (8 miles [12.9 km] to the north)
  • Marion
    (11 miles [17.7 km] to the south)
  • Parker
    (12 miles [19.3 km] to the south)
  • Hartford
    (12 miles [19.3 km] to the east)
    • Note: The GPS coordinates that we are using for Hartford have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hartford
    • Hartford is located in Minnehaha County
    • Population from the 2020 Census: 3,406 people
    • Jump to TripAdvisor's Tourism page for Hartford <3>
  • Salem
    (14 miles [22.5 km] to the northwest)
  • Bridgewater
    (15 miles [24.1 km] to the west)
  • Ellis
    (17 miles [27.4 km] to the east)
    • Note: The GPS coordinates that we are using for Ellis have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ellis
    • Ellis is located in Minnehaha County
  • Lyons
    (18 miles [29 km] to the northeast)
  • Freeman
    (20 miles [32.2 km] to the southwest)
  • Hurley
    (21 miles [33.8 km] to the south)
  • Lennox
    (21 miles [33.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Lennox have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lennox
    • Lennox is located in Lincoln County
    • Population from the 2020 Census: 2,500 people
    • Jump to TripAdvisor's Tourism page for Lennox <3>
  • Emery
    (21 miles [33.8 km] to the west)
    • Note: The GPS coordinates that we are using for Emery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Emery
    • Emery is located in Hanson County
    • Population from the 2020 Census: 454 people
    • Jump to TripAdvisor's Tourism page for Emery <3>
  • Franklin
    (22 miles [35.4 km] to the north)
    • Note: The GPS coordinates that we are using for Franklin have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Franklin
    • Franklin is located in Lake County
    • Estimated population in 2014: 333 people
  • Spencer
    (22 miles [35.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Spencer have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Spencer
    • Spencer is located in McCook County
    • Population from the 2020 Census: 145 people
    • Jump to TripAdvisor's Tourism page for Spencer <3>
  • Sioux Falls
    (23 miles [37 km] to the east)
  • Orland ‑ Historic
    (23 miles [37 km] to the north)
    • Note: The GPS coordinates that we are using for Orland have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Orland
    • Orland is located in Lake County
  • Baltic
    (25 miles [40.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Baltic have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Baltic
    • Baltic is located in Minnehaha County
    • Population from the 2020 Census: 1,201 people
    • Jump to TripAdvisor's Tourism page for Baltic <3>
  • Chester
    (25 miles [40.2 km] to the northeast)
  • Spring Valley
    (26 miles [41.8 km] to the south)
    • Note: The GPS coordinates that we are using for Spring Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Spring Valley
    • Spring Valley is located in Turner County
  • Harrisburg
    (26 miles [41.8 km] to the east)
    • Note: The GPS coordinates that we are using for Harrisburg have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Harrisburg
    • Harrisburg is located in Lincoln County
    • Population from the 2020 Census: 7,126 people
    • Jump to TripAdvisor's Tourism page for Harrisburg <3>
  • Brant Lake
    (26 miles [41.8 km] to the northeast)
    • Jump to our Gazetteer entry for Brant Lake
    • Brant Lake is located in Lake County
  • Canova
    (26 miles [41.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Canova have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Canova
    • Canova is located in Miner County
    • Population from the 2020 Census: 99 people
    • Jump to TripAdvisor's Tourism page for Canova <3>
  • Farmer
    (26 miles [41.8 km] to the west)
    • Jump to our Gazetteer entry for Farmer
    • Farmer is located in Hanson County
    • Population from the 2020 Census: 11 people

The official website for State of South Dakota: sd.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Rumpus Ridge, please let us know so that we can improve our accuracy.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024